1/36
Looks like no tags are added yet.
What is the purpose of a generator?
Convert mechanical energy to electrical energy for use or storage
How does a generator produce a current?
By rotating loops of wire in a fixed magentic field
What is the difference between a motor and a generator?
A motor converts electrical to mechanical energy to perform work, a generator converts mechanical energy to electrical energy
Define a solenoid
Coil of wire
Define an armature
Inner structure of the generator/ motor that has coils of wire that rotate around a magnetic field
Define an induction motor
An electric motor in which the shaft is rotated through mutual induction
What are the 2 parts of an induction motor?
Stator and rotor
How does a stator work?
Stators are stationary electromagnets in pairs around a rotor. They each get energized one after the other, which creates an external magnetic field. This field induces a current in the rotor.
Transformer definition
An electrical device used to change the magnitude of current and voltage
What is the purpose of slip rings attached to the ends of wire loops in generators?
Electromechanical devices used to connect a stationary system to a rotating system. They rotate against wire brushes and conduct a current to fixed wires outside the generator
The MORE turns of wire in a coil, the ____ the voltage output
HIGHER
Increasing the turns of a wire also requires more _____ to turn the coil
FORCE
Replacing the slip rings on the ends of the coil in the generator with a commutator ring produces ____ _____
Direct current (DC generator)
In a simple motor, the armature is supplied with ____ _____
Alternating current
Rotor definition
Located in the middle of stators, made of an iron core surrounded by coils.
What are the three identified circuits within the overall x-ray circuit?
Primary, secondary, and filament circuit
What are the 3 transfomers in the x-ray circuit?
Autotransformer
Step up transformer
Step down transformer
What priniciple does the autotransformer operate on?
Self induction
What is the purpose of the step-down transfomer?
Decrease voltage, control the degree that the filament is heated
What is the transformer formula?
Vp/ Vs = Is/ Ip
What is the transformer formula for current?
Ip/Is = Ns/Np
What are the 2 transformer types?
Closed-core
Shell
What components are part of the primary circuit?
On/ Off switch
Line compensator
Circuit breaker
Primary side of step up transformer
Autotransformer
kVp meter
Major/ minor taps
Exposure timer
What components are part of the secondary circuit?
Rest of step up transformer
mA meter
Rectifiers
Solid-state diodes
What components are found in the filament circuit?
Rheostat
Filaments large and small
Step-down transformer
Focus cup
Focal spot selector
Cathode
What is the purpose of the line compensator?
Automatically adjusts the power supplied to the x-ray machine to 220 V
What is the purpose of the circuit breaker?
Protect against short circuits and electric shock
What is the autotransformer?
An adjustable transformer controlled by the kilovolt peak selector on the control panel (AKA variable kVp selector)
What is the step-up transformer (AKA high tension transformer)?
Used to increase voltage from the autotransformer to the kilovoltage necessary for x-ray production
What are the types of timers?
Synchronous
Electronic
mAs timer
AEC
What principle does the step up transformer use?
Mutual induction
How much will the voltage be increased?
500-1000 Volts
What is the function of a rectifier?
Convert AC to DC
What type of rectifiers are commonly used in today’s x-ray system?
Solid-state diodes- p-type, n-type
How are the p-type and n-type crystals different?
p-type: Positive charge, abundance of electron “traps”
n-type: negative charge, abundance of freely moving electrons
How does the rheostat work?
Variable resistor that control the heating and number of electrons boiled off working with the exposure timer, and controls current by changing resistance
What does the focal spot selector choose?
Large or small