1/36
Cache attacks — Compare Prime+Probe and Flush+Reload, what each must share, and what a slow probe or fast reload suggests. Side channels and covert channels — Distinguish unintended leakage from deliberate signaling. Compare SPA and DPA, calculate the difference of means, interpret a DPA peak, and explain how constant-time code reduces timing leakage. Physical attacks and fault injection — Classify non-invasive, semi-invasive, and invasive attacks by the access they require. Explain how clock or voltage glitches cause faults, how a fault can disrupt secure boot enforcement, and how VoltPillager targets the SVID link between the CPU and its voltage regulator. Hardware foundations and trust — Review the hardware root of trust, the IC lifecycle, what a PCB does, and how trust differs between third-party IP and chip fabrication. SoC test and debug security — Explain JTAG, boundary scan, and internal scan chains. Distinguish controllability from observability and identify how debug permissions protect assets such as keys and firmware. Hardware Trojans — Identify the trigger, payload, and effect, and explain why rare triggers can evade functional testing. DRAM refresh and RowHammer — Explain why DRAM needs refresh, how repeated aggressor-row activations can flip bits in a nearby victim row, and why a page-table bit flip can affect memory permissions.
What does a fast Flush+Reload result suggest?
The shared line was likely already cached when the observer reloaded it. The victim may have accessed it during the observation window.
What does a slow Prime+Probe result suggest?
Some of the observer's own lines were likely evicted. Victim activity in the same cache set is one possible cause.
What must be shared in each cache attack?
Flush+Reload needs the same physical cache line. Prime+Probe can use separate physical lines that compete for the same cache set.
How do you calculate the DPA difference of means?
Average each predicted-bit group separately at the same time sample. Then subtract in the order given by the question.
DPA practice: group 1 has 8 and 12. Group 0 has 10 and 16. What is mean₁ − mean₀?
Mean₁ is 10 and mean₀ is 13. The difference is −3.
What does a repeatable DPA peak support?
A peak near the relevant operation is evidence that the candidate key guess is consistent with the measured leakage.
What defense directly addresses timing leakage from a secret-dependent branch?
A constant-time implementation avoids control flow and memory accesses that depend on secret data.
Package intact during external power measurement
Non-invasive. The observer measures the device externally while its package remains intact.
Package opened for laser access to the die
Usually semi-invasive. The laser interacts with exposed circuitry without direct electrical contact with internal nodes.
A probe makes direct electrical contact with an internal chip net
Invasive microprobing. The probe directly contacts circuitry inside the chip.
Which interface does VoltPillager target?
Serial Voltage Identification or SVID. It carries voltage-control communication between the CPU and its voltage regulator.
VoltPillager: method vs. fault vs. impact
Board-level undervolting is the method. Incorrect computation is a possible fault. Compromising an enclave's security is the impact.
A supplier delivers an IP block with hidden malicious logic. What trust problem is this?
Third-party IP trust. The malicious logic is already present in the supplied design block.
A foundry inserts malicious logic during manufacture. What trust problem is this?
IC fabrication trust. The malicious modification enters during chip manufacturing.
Why does DRAM need refresh?
DRAM cells store bits as charge that gradually leaks. Refresh restores the charge before the data is lost.
Which row is repeatedly activated in RowHammer and which row can flip?
The aggressor row is repeatedly activated. A nearby victim row can experience bit flips even without a direct write to it.
Why can a RowHammer bit flip matter for security?
If it changes sensitive data such as a page-table permission then it can alter which code can access memory.