1/44
Comprehensive vocabulary flashcards covering fundamental networking concepts across five lectures: LAN architecture, IP addressing and VLSM, basic Cisco IOS device configuration, Ethernet switching operations and frames, and VLAN/trunking configurations.
Local Area Network (LAN)
A network infrastructure that spans a small, interconnected geographical area (such as a home, school, office building, or computer laboratory) administered by a single organization or individual.
Wide Area Network (WAN)
A network infrastructure that spans a broad geographical region, interconnecting disparate LANs and typically administered by one or more telecommunications service providers.
Peer-to-Peer Network
A network structure where client devices simultaneously function as both clients and servers to share files and printers without a dedicated central server.
Intermediary Network Device
A networking device—such as a switch, router, access point, or firewall—that interconnects end devices, manages data pathways, regenerates signals, and reports transmission errors.
Converged Network
A network infrastructure capable of delivering voice, video, and data communications over a shared physical platform using a unified set of rules and standards.
Access Layer
The tier in the Cisco hierarchical network design that directly connects end-user devices (such as PCs, printers, and IP phones) to the network infrastructure.
Distribution Layer
The tier in the hierarchical design that aggregates Layer 2 broadcast domains, routes between subnets, defines network access policies, and connects the access layer to the core layer.
Core Layer
The high-speed backbone layer of a hierarchical network designed for rapid, redundant packet transport and fault isolation between distribution devices.

Intranet, Extranet, and Internet
The three concentric network access domains: Intranet (private access restricted to organization members), Extranet (secure access extended to trusted partners, suppliers, and collaborators), and the Internet (global public network).
Protocol Data Unit (PDU)
The specific format and label given to data at each successive layer of the protocol stack during encapsulation: Data stream (Application), Segment (Transport), Packet (Network), Frame (Data Link), and Bits (Physical).
Multiplexing
The process of interleaving multiple distinct streams of segmented data together so they can share a single physical communication medium simultaneously.
Default Gateway (DGW)
The Layer 3 IP address assigned to a local router interface that serves as the entry and exit point for devices communicating with destinations outside their local subnet.
Broadcast Domain
A logical division of a network wherein any broadcast frame sent by one device is received and processed by all other devices in the domain; bounded and stopped by routers.
Variable Length Subnet Masking (VLSM)
An IP subnetting technique that enables subnetting an already subnetted address block to create subnets of varying sizes based on specific host requirements, minimizing wasted addresses.
Demilitarized Zone (DMZ)
A perimeter network segment configured with public IPv4 addresses to host an enterprise's external-facing servers (such as web and email servers) while keeping internal corporate networks secure.
Collision Domain
A physical network segment where data packets can collide when two devices transmit at the same time over a shared medium; isolated on each individual port of a switch or bridge.

Console Cable
A specialized serial rollover cable (typically RJ-45 to DB-9) used to connect a terminal or computer directly to a device's console port for out-of-band management and initial configuration.
Switch Virtual Interface (SVI)
A virtual Layer 3 interface on a switch (such as interface vlan 1) configured with an IP address and subnet mask to enable remote management over Telnet or SSH.
User EXEC Mode
The basic, view-only command-line interface mode (indicated by the > prompt) that permits a user to view device status and execute limited monitoring commands without altering device settings.
Privileged EXEC Mode
The operational mode on a Cisco IOS device (indicated by the # prompt and accessed via enable) that grants access to all monitoring, testing, debugging, and configuration commands.
running-config
The active configuration file stored in volatile Random Access Memory (RAM) that immediately determines the device's operational behavior and is lost upon reboot or power cycle.
startup-config
The saved configuration file stored in non-volatile RAM (NVRAM) that is read and loaded into RAM by a Cisco device during bootup.
service password-encryption
A Cisco IOS global configuration command that applies weak encryption to all plaintext passwords displayed in the running and startup configuration files to prevent shoulder surfing.
Auto-MDIX
An automatic interface feature that detects the type of cable attached (straight-through or crossover) and configures the physical port connection accordingly.
Logical Link Control (LLC) Sublayer
The upper data link sublayer specified by IEEE 802.2 that identifies the network layer protocol carried within an Ethernet frame to facilitate multi-protocol handling.
Media Access Control (MAC) Sublayer
The lower data link sublayer defined by IEEE 802.3, 802.11, or 802.15 responsible for data encapsulation, framing, physical addressing, and governing media access.

Ethernet Frame Fields
The standard Layer 2 structure defined by IEEE 802.3 consisting of a Preamble/SFD (8 bytes), Destination MAC (6 bytes), Source MAC (6 bytes), Type/Length (2 bytes), Data (46–1500 bytes), and FCS (4 bytes).
Organizationally Unique Identifier (OUI)
A unique 24-bit (3-byte or 6 hexadecimal digit) code assigned by the IEEE to hardware vendors that forms the first half of every Ethernet MAC address.
Runt Frame
An invalid Ethernet frame that is shorter than the minimum legal size of 64 bytes (excluding preamble), commonly generated by transmission collisions and automatically dropped by switches.
Jumbo Frame
An Ethernet frame configured to carry more than the standard 1500 bytes of data payload (typically up to about 9200 bytes) to enhance throughput on high-speed connections.
Address Resolution Protocol (ARP)
A Layer 2 protocol used to discover the physical MAC address corresponding to a known target IPv4 address on the local network segment.
Store-and-Forward Switching
A Layer 2 switching method where the switch buffers the complete frame and recalculates the Frame Check Sequence (FCS/CRC) to verify frame integrity before forwarding.
Cut-Through Switching
A frame forwarding technique that begins transmitting a packet immediately after reading the destination MAC address (6 bytes), resulting in lower latency but propagating corrupted frames.
Fragment-Free Switching
A modified cut-through switching method that buffers the first 64 bytes of a frame to ensure the collision window has passed before forwarding the frame out the destination port.
Duplex Mismatch
A networking fault where one port operates in half-duplex while the connecting port operates in full-duplex, resulting in dropped frames, late collisions, and performance degradation.
Dynamic ARP Inspection (DAI)
An enterprise security feature on switches that validates ARP packets against trusted bindings to defend against ARP spoofing and poisoning attacks.
Virtual Local Area Network (VLAN)
A logical broadcast domain created within one or more physical switches that segments groups of devices based on function, project, or application rather than physical location.
Native VLAN
The designated VLAN assigned to an IEEE 802.1Q trunk port across which frames are transmitted without an 802.1Q header tag; defaults to VLAN 1 on Cisco switches.
VLAN Trunk
A point-to-point Layer 2 link between network devices that uses IEEE 802.1Q encapsulation to multiplex and carry traffic for multiple VLANs over a single physical cable.
Voice VLAN
A dedicated VLAN configured with Quality of Service (QoS) and Class of Service (CoS) priority to ensure IP telephony traffic maintains end-to-end latency below 150 ms.

IEEE 802.1Q Tag
A 4-byte field inserted into an Ethernet header consisting of a 2-byte Tag Protocol ID (0x8100), 3-bit Priority, 1-bit CFI, and a 12-bit VLAN ID (VID) supporting up to 4096 VLANs.
Normal Range VLANs
VLAN numbers from 1 to 1005, whose definitions are stored in the flash vlan.dat file; IDs 1002–1005 are automatically created and reserved for legacy Token Ring and FDDI.
Dynamic Trunking Protocol (DTP)
A proprietary Cisco point-to-point protocol that automatically negotiates whether an interconnecting switch port acts as an access link or an 802.1Q trunk link.
Dynamic Auto
A DTP port configuration mode that passively listens and converts an interface into a trunk only if the neighboring switch port initiates trunking via trunk or dynamic desirable mode.
Dynamic Desirable
A DTP port configuration mode that actively sends negotiation frames to convert the connecting link into a trunk if the neighbor port is set to trunk, desirable, or dynamic auto.