1/27
This set of vocabulary flashcards covers key concepts of mechanical systems, simple machines (levers, pulleys, wheels, axles), hydraulics, and pneumatics based on the CAPS curriculum for Grades 4-7.
Technology (CAPS definition)
The use of knowledge, skills, values and resources to meet people’s needs and wants by developing practical solutions to problems, taking social and environmental factors into consideration.
Mechanical System
A system made up of components that work together to transmit forces and movement in order to perform a task.
Force
A push or pull that causes an object to move, stop, change direction, or change shape.
Mechanical Advantage
How a machine makes work easier by reducing the amount of force needed or changing the direction of the force.
Rotational Movement
Circular motion, such as that produced by wheels, gears, or pulleys.
Linear Movement
Straight-line motion, such as pistons or sliding doors.
Oscillating Movement
Back-and-forth motion, similar to the movement of a seesaw.
Input Force
The force or energy applied to a system (e.g., pulling a rope).
Output Force
The movement or work produced by the system (e.g., lifting a load).
Wheel and Axle
A simple mechanical system consisting of two circular parts of different sizes that rotate together to make work easier.
Lever
A simple machine consisting of a rigid bar that rotates around a fixed point called a fulcrum to lift or move a load using an applied force.
Fulcrum
The fixed point around which a lever pivots.
Class 1 Lever
A lever where the fulcrum is located in the middle, between the effort and the load (e.g., seesaw, scissors, crowbar).
Class 2 Lever
A lever where the load is located in the middle, between the fulcrum and the effort (e.g., wheelbarrow, nutcracker).
Class 3 Lever
A lever where the effort is in the middle, between the fulcrum and the load (e.g., tweezers, fishing rod, hockey stick).
Mechanical Advantage (MA) Formula for Levers
MA=Input force (FE)Output force (FL) or MA=Resistance arm (DL)Effort arm (DE)
Law of the Lever
The principle that balance occurs when moments are equal and opposite, expressed as F1D1=F2D2.
Pulley
A simple machine consisting of a wheel with a groove around which a rope or cable passes, used to lift loads or change the direction of force.
Fixed Pulley
A pulley attached to a fixed support that changes the direction of the force but does not reduce the effort required; MA=1.
Movable Pulley
A pulley that moves with the load and reduces the effort needed to lift it; typically has a MA=2.
Block and Tackle
A compound pulley system made up of fixed and movable pulleys used to greatly reduce effort for lifting heavy loads.
Work (W) Formula
W=F×D, where W is measured in Joules (J), F (Force) is in Newtons (N), and D (Distance) is in meters (m).
Hydraulic System
A system that uses incompressible liquid (usually oil or water) under pressure to perform work and transmit force.
Pneumatic System
A system that uses compressed air or gas to perform work; typically faster but less powerful than hydraulic systems.
Pascal’s Law
The mechanical principle that pressure applied at one point in a fluid system is transmitted to another.
Jaws of Life
A hydraulic rescue apparatus used to pry apart wreckage or cut vehicles to free trapped individuals.
Technology Process Skills
The core skills used in technological development: Investigate, Design, Make, Evaluate, and Communicate.
Mini-PAT
Mini-Practical Assessment Task, a specific assessment type used in Grade 7 Technology to measure skills and knowledge application.