Mass spectrometery

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/14

encourage image

There's no tags or description

Looks like no tags are added yet.

15 Terms

1
New cards

Whats mass spectrometry?

A technique used to find out information about the isotopes.

2
New cards

What information does mass spectrometry give us?

  • Abundance of isotopes

  • Number of isotopes

  • Mass of isotopes

  • work out what element is present 


3
New cards

Whats the 3 stages of mass spectrometry?

  1. Ionisation

  2. Separation

  3. Detection


4
New cards

Whats the ionisation stage?

  • The sample needs to be ionised, forming positively charged ions. This is so it can be accelerated and detected.

  • There are 2 methods.


5
New cards

Whats the process of Electron impact?

  • A vaporised sample goes into the mass spectrometer, where high-energy electrons are fired at it.

  • The electrons come from a highly heated wire filament with a current passing through it, emitting electrons.

  • Electron gun: this knocks off 1 electron from each particle, forming a 1+ ion.


6
New cards

Whats the equation for ionisation?

X(g) → X⁺(g) + e⁻

7
New cards

Whats fragmentation?

  • The molecular ion will fragment/break down into smaller fragments, some of which are detected in the mass spectrum: fragmentation.


8
New cards

What is electron impact used for?

  • This technique is used for elements and substances with low formula mass (organic + inorganic molecules) when molecules are vaporised.


9
New cards

Whats the process of electrospray?

  • Sample X is dissolved in a volatile solvent (water/methanol etc.) and injected through a fine hypodermic needle to give a fine mist of droplets.

  • The tip of the needle is attached to the positive terminal of a high-voltage power supply.

  • The particles are ionised by gaining a proton (H⁺ ion) from the solvent and leave the needle producing XH⁺ ions with a single + charge and may form M + 1.


10
New cards

Whats the equation for electrospray?

X(g) + H⁺ → XH⁺(g)

11
New cards

When is electrospray used?

  • This is used for substances with higher Mr including proteins.

  • This is known as a soft ionisation technique and fragmentation rarely takes place.


12
New cards

What happens after the ionisation process?

Acceleration:  it can be accelerated using an electric field so that they all have the same kinetic energy.

13
New cards

Which particles have a faster velocity?

Lighter particles have a faster velocity; heavier particles have a slower velocity.


14
New cards

Whats the detection process?

  • The positive ions reach a negatively charged electrical plate.

  • When they hit the detector plate, the positive ions gain an electron.

  • This generates a movement of electrons and hence an electric current.

  • The size of current gives a measure of the number of ions hitting the plate (abundance).


15
New cards

Whats the analysis process?

  • A computer uses the data to produce a mass spectrum.

  • This shows the mass/charge ratio (m/z) and abundance of each ion that reaches the detector.

  • As most ions have a 1+ charge, the m/z is effectively the mass of each ion.


<ul><li><p>A computer uses the data to produce a mass spectrum.</p></li><li><p>This shows the <strong>mass/charge ratio (m/z)</strong> and abundance of each ion that reaches the detector.</p></li><li><p>As most ions have a 1+ charge, the m/z is effectively the mass of each ion.</p></li></ul><p></p>