1/64
Comprehensive vocabulary flashcards covering Grade 11 Civil Technology (Exemplar 2017), including materials, tools, equipment, quantities, joining, construction techniques, civil services, drainage, and woodworking.
Ferrous Metal
A category of metal that has iron as its main constituent element, such as cast iron and mild steel.
Non-ferrous Metal
A metal that does not have iron as its main constituent and contains little to no iron, such as copper, aluminium, and lead.
Hydration
The chemical reaction that takes place when water reacts with cement, initiating the setting process, binding aggregates together, and developing structural strength.
Screed
A layer of cement-and-sand mortar applied over a concrete slab to produce a smooth, flat, and level floor surface.
Bench Grinder
A stationary workshop grinding machine used to sharpen steel drill bits and cold chisels.
Power Screwdriver
An electric or cordless power tool used to drive screws into timber and materials rapidly and efficiently.
Angle Grinder
A handheld power tool equipped with an abrasive or diamond disc, used on building sites to cut grooves (chases) into brick walls and cut or grind metal.
Portable Circular Saw
A versatile handheld power saw used to cut timber components on site, such as trimming the rafters of an installed roof truss to the correct length.
Concrete Mixer
A mechanical site machine with a rotating drum, recognized as the most effective tool to mix large quantities of concrete uniformly on a building site.

Wheelbarrow
A single-wheeled piece of site equipment with two handles used to transport fresh concrete, bricks, soil, and other building materials around a construction site.

Nosing Trowel (Maattroffel)
A small pointed hand trowel used to mix gypsum plaster or small amounts of mortar on a hawk, and for patching, touching up small areas, and finishing mouldings.
Basin Wrench
A specialised plumbing hand wrench with a long shaft and pivoted swivelling jaw, used to tighten or loosen cup nuts in confined spaces behind sanitary appliances.
Cross-pene Hammer
A light hand hammer with a wedge-shaped horizontal cross peen opposite the striking face, used to start and drive small nails such as panel pins.
Sliding Bevel
An adjustable woodworking layout tool consisting of a stock and slotted blade, used to duplicate angles and transfer them from one surface to another.
Trying Plane
A long woodworking bench plane used to plane long timber boards and planks to obtain a completely straight, true surface.
Centre Line (Quantity Surveying)
The total mean perimeter length running along the centre of a wall, calculated for a rectangular building as: CentreĀ Line=2ĆLength+2ĆWidthā4ĆWallĀ Thickness.
Epoxy Adhesive
A high-strength adhesive that consists of two separate components: a resin and a hardener, which must be mixed before application.
PVA Glue
Polyvinyl acetate; a water-based adhesive primarily used to bond timber and wood joints, which dries quickly and becomes transparent when cured.
Contact Glue
A rubber-based solvent adhesive applied to both mating surfaces; once dried and brought together, parts bond immediately and cannot be repositioned or separated.
Silicone Sealant
A flexible, rubbery, waterproof, and heat-resistant adhesive sealant used around sanitary fixtures and external building joints to prevent the penetration of water.
Queen Closer
A brick cut lengthwise into two equal halves with dimensions of 220mmĆ55mmĆ75mm, placed next to a quoin header to create lap in brick bonding.
Malleable Cast Iron
An annealed, tough form of cast iron with improved ductility, commonly used for water pipe fittings, security gates, and ornamental fences.

Rammer
A mechanical compaction machine used on building sites to compact loose or backfilled soil and tamp hardcore fillings under concrete slabs up to a depth of 300mm.
Pad Foundation
An isolated reinforced concrete foundation slab used beneath a single column, pier, or heavy machinery to distribute concentrated point loads safely to the soil.
Short-bored Pile Foundation
A foundation system consisting of vertically bored and cast-in-situ concrete piles, used to counteract ground movement caused by the expansion and shrinkage of clay soils.
Power Float
A motorized finishing machine with rotating steel blades used on wet concrete slabs to compact, smooth, and create a dense, hard-wearing surface.

Poker Vibrator
A portable petrol- or electrically-driven mechanical needle vibrator immersed into freshly poured concrete to consolidate the mix and remove entrapped air pockets.

Butterfly-pattern Wall Tie
A wire wall tie with looped ends shaped like butterfly wings, embedded in the mortar joints across the cavity to tie the inner and outer leaves of a cavity wall together.

Double-triangle Wall Tie
A galvanized wire cavity wall tie shaped into two opposing triangles with a central downward drip point to prevent water transmission between the wall leaves.
H-Beam
A heavy structural steel section with wide, parallel flanges resembling the letter 'H', widely used as vertical columns in structural frames, bridges, and shipbuilding.
I-Beam
A rolled structural steel profile with narrower, tapered flanges resembling an 'I', primarily used as horizontal load-bearing beams in factories, frameworks, and bridges.
Channel Iron (C-Section)
A structural steel section shaped like a 'C', widely used in the construction industry for structural steel frames, columns, beams, purlins, and roof structures.

Staircase Formwork
A temporary wooden framework consisting of soffit boarding, risers, and side stringers assembled to mould and support in-situ concrete staircases during pouring and curing.
Voussoir
A wedge-shaped brick or stone unit that forms part of an arch ring, with joints radiating towards the arch's centre of curvature.
Key Voussoir
The central, uppermost wedge-shaped brick or stone placed at the crown of an arch that locks all other voussoirs firmly in position.
Intrados
The internal, bottom curved boundary or soffit line of an arch.
Extrados
The external, uppermost curved boundary surface of an arch ring.
Inverted Box Rib (IBR)
A fluted, trapezoidal-profiled metal roof sheeting widely used in industrial and residential building construction for efficient water drainage and span strength.
Placing of Concrete
The process of depositing, pouring, pumping, or spraying freshly mixed concrete into formwork or onto the exact site where it is to harden.
Concrete Curing
The practice of maintaining moisture and temperature conditions in freshly placed concrete to prevent rapid drying out, allowing continuous hydration so specified strength is reached.
Vacuum Breaker
A safety plumbing valve installed on the hot and cold water supply lines 300mm above an electrical geyser to prevent backsiphonage and tank collapse under vacuum conditions.

Full-way Gate Valve
A brass shut-off valve operated by a handwheel, gland nut, and internal wedge gate that provides an unobstructed, full-bore flow of water when fully opened.

Pop-rivet Gun
A hand-levered mechanical tool used to set, draw, and fasten blind pop-rivets when joining thin sheet metal components.

Grooving Tool
A specialized hardened steel sheet-metal hand tool with a longitudinal recessed groove on its face, struck with a mallet to close and flatten a grooved seam joint.

Box-and-Pan Folding Machine
A manually operated sheet metal bending machine equipped with removable segmented fingers and a folding apron, used to bend metal sheets to specified angles and profiles.
Storm Water
Large volumes of surface runoff water derived from precipitation (rain, hail, or melting snow) that flow across the ground and must be channelled to prevent flooding.
Soil Water
Effluent water originating from sanitary fixtures such as water closets (WCs) and urinals that contains human excreta.
Wastewater
Used domestic discharge water that originates from fixtures such as baths, showers, washbasins, and kitchen sinks, free of human excreta.
Invert Level (IL)
The lowest point on the internal bottom surface of a drain pipe, sewer conduit, or channel along which liquid flows.
uPVC
Unplasticised polyvinyl chloride; a rigid, chemical-resistant synthetic plastic widely used for underground drainage, soil stacks (110mm), and waste pipes (50mm).
Water Trap
A water-retaining fitting or bend placed beneath a sanitary fixture designed to maintain a water seal that prevents foul sewer gases and smells from entering the building.
Vent Stack
A vertical ventilation pipe connected to a drainage stack system that introduces air to equalise air pressure and prevent trap siphonage caused by water discharge.
Rodding Eye
An access fitting with a removable airtight inspection plug located on a soil pipe or drainage line, through which drain rods can be inserted to clear obstructions.
Seasoned Timber
Wood that has been kiln-dried or air-dried to reduce its moisture content, making it dimensionally stable, resistant to shrinkage and warping, and protected against fungal decay.
Quarter-Sawn Board
A board produced by dividing a log into four quadrants and cutting boards radially across the annual growth rings, producing stable timber less prone to cupping.
Arch Centre
A temporary wooden framework built to support arch bricks (voussoirs) while the arch is being constructed until the mortar joints have fully hardened.
Raking Shore
An inclined timber shoring member erected to transfer lateral loads from a leaning, unstable, or damaged wall down to a sole plate anchored in the ground.
Flying Shore
A horizontal timber shoring system erected between two opposing walls to provide temporary lateral stability to both walls without resting on the ground below.
Secret Nailing
A floor-laying method where nails are driven diagonally at approximately 45ā through the tongue of a tongue-and-groove board into the joist, concealed by the groove of the next board.
Staircase Rise
The vertical height measured between the upper walking surfaces of two consecutive treads on a staircase.
Staircase Riser
The vertical board or vertical upright surface connecting two consecutive horizontal treads of a staircase.
Outer String (Stringer)
The inclined side structural board of a staircase that supports the outer ends of the treads and risers.
Brandering
Small wooden battens (38mmĆ38mm) nailed at regular intervals across the underside of roof tie beams to support gypsum ceiling boards.
Parliament Hinge
An ironmongery hinge with extended knuckles and wide leaves, engineered to allow a door to clear the frame architrave and open flat through 180ā against the wall.
Barrel Bolt
A surface-mounted mechanical locking hardware device featuring a cylindrical sliding bolt within a sleeve, used to provide additional security on doors.