Pelton Turbine: Parts, Working Principle, and Formulas

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/18

flashcard set

Earn XP

Description and Tags

Vocabulary practice flashcards covering Pelton turbine components, operational mechanisms, and essential hydraulic design equations.

19 Terms

1
New cards

Pelton Turbine

An impulse turbine operating under atmospheric pressure, suitable for very high heads (>250 m>250\,\text{m}) and low flow rates, in which all energy at the inlet is converted to kinetic energy in a tangential water jet.

2
New cards

Spear (Needle)

A conical needle moving axially inside the nozzle to control water flow rate; moving forward reduces flow opening, while moving backward increases flow opening.

3
New cards

Runner with Buckets

A circular disc with multiple evenly spaced double hemispherical cup- or bowl-shaped vanes mounted around its periphery, commonly fabricated from cast iron, cast steel, bronze, or stainless steel.

4
New cards

Splitter

A ridge or dividing wall located in the center of a Pelton bucket that splits the incoming water jet into two equal halves.

5
New cards

Braking Jet

A secondary water jet directed at the back of the buckets to stop the runner quickly after the spear has closed the main nozzle.

6
New cards

Casing (Pelton Turbine)

A cast iron or fabricated steel enclosure that prevents water splashing, guides discharge to the tail race, and safeguards against accidents, providing no hydraulic energy conversion.

7
New cards

Governing Mechanism

An automatic regulating system that adjusts the axial position of the spear in the nozzle to maintain constant rotational speed under varying external loads.

8
New cards

Jet Velocity (V1V_1)

The theoretical velocity of water exiting the nozzle, given by the formula V1=Cv2gHV_1 = C_v \sqrt{2gH}, where CvC_v is the coefficient of velocity (0.980.98 to 0.990.99) and HH is net head.

9
New cards

Wheel Velocity (uu)

The linear tangential speed of the Pelton wheel buckets, given by u=ϕ2gHu = \phi \sqrt{2gH}, where ϕ\phi is the speed ratio.

10
New cards

Jet Ratio (mm)

The ratio of the Pelton wheel diameter (DD) to the jet diameter (dd), mathematically defined as m=Ddm = \frac{D}{d}.

11
New cards

Number of Buckets Formula (ZZ)

The empirical relation used to determine bucket count on a runner: Z=15+D2dZ = 15 + \frac{D}{2d}.

12
New cards

Number of Jets

The total flow rate divided by the flow capacity of a single nozzle jet: Number of jets=Qq\text{Number of jets} = \frac{Q}{q}, where q=A×V1q = A \times V_1.

13
New cards

Force Exerted by Jet on Blade (FxF_x)

The dynamic thrust exerted along the direction of bucket motion: Fx=ρAV1(Vw1±Vw2)F_x = \rho A V_1 (V_{w1} \pm V_{w2}), where Vw1V_{w1} and Vw2V_{w2} are inlet and outlet whirl velocities.

14
New cards

Hydraulic Efficiency (ηh\eta_h)

The ratio of power delivered to the runner to the total water power: ηh=Fx×uρgQH\eta_h = \frac{F_x \times u}{\rho g Q H}.

15
New cards

Condition for Maximum Hydraulic Efficiency

The operational requirement that the peripheral bucket velocity must equal half of the incoming jet velocity: u=V12u = \frac{V_1}{2}.

16
New cards

Water Power (PwP_w)

The total theoretical hydraulic power available at the inlet of the turbine, given by Pw=ρgQHP_w = \rho g Q H.

17
New cards

Overall Efficiency (ηo\eta_o)

The product of hydraulic efficiency, mechanical efficiency, and volumetric efficiency: ηo=ηh×ηm×ηv\eta_o = \eta_h \times \eta_m \times \eta_v.

18
New cards

Jet Deflection Angle

The angle through which the bucket turns the water jet, typically 160∘160^\circ to 170∘170^\circ (commonly 165∘165^\circ), designed to prevent outgoing water from interfering with following buckets.

19
New cards

Speed Ratio (ϕ\phi)

The fraction of the theoretical jet velocity at which the runner operates, typically ranging from 0.430.43 to 0.480.48 (around 0.450.45).