1/69
Comprehensive vocabulary flashcards covering key definitions, laws, equations, and principles from Plus One Physics.
Light Year (ly)
Distance travelled by light in vacuum in one year (1ly=9.46×1015m).
Astronomical Unit (AU)
Mean distance between Earth and Sun (1AU=1.496×1011m).
Principle of Homogeneity of Dimensions
In a physically valid equation, every term on both sides must have the same dimensional formula.
Condition for Distance to Equal Magnitude of Displacement
When an object moves along a straight path in a single direction without turning back.
Slope of Velocity-Time Graph
Acceleration (a=dtdv).
Area under Velocity-Time Graph
Displacement covered by the body.
Uniform Positive Acceleration (Velocity-Time Graph)
Straight line sloping upward with positive gradient from initial velocity u.
Uniform Retardation (Velocity-Time Graph)
Straight line sloping downward toward the time axis with negative gradient.
Angle of Maximum Horizontal Range for a Projectile
At θ=45∘, because R=gu2sin(2θ), and sin(2×45∘)=sin(90∘)=1 (Maximum value).
Scalar Quantity
Physical quantity with magnitude only (e.g., Mass, Speed, Work, Temperature).
Vector Quantity
Physical quantity having both magnitude and direction obeying vector addition laws (e.g., Velocity, Acceleration, Force, Momentum).
Parallel Vectors
Vectors with angle θ=0∘ (A×B=0).
Perpendicular Vectors
Vectors with angle θ=90∘ (A⋅B=0).
Equal Vectors
Vectors having same magnitude and same direction.
Impulse (J)
Product of large force and short time for which it acts (J=F×Δt). Unit: N⋅s or kg⋅m/s.
Impulse-Momentum Theorem
Total impulse delivered to a body equals change in its linear momentum (J=Δp=pf−pi).
Pulling vs. Pushing Friction (Lawn Mower)
When pulling, vertical force component acts upward, reducing normal reaction (N=mg−Fsin(θ)) and reducing friction. When pushing, vertical force component acts downward, increasing normal reaction (N=mg+Fsin(θ)) and increasing friction.
Static Friction (fs)
Self-adjusting friction when body is at rest (fs≤μsN).
Limiting Friction (fs,max)
Maximum static friction before motion begins (fs,max=μsN).
Kinetic Friction (fk)
Friction during motion (fk=μkN). Always μk<μs.
Elastic Collision
Collision in which both total linear momentum and total kinetic energy are conserved (e.g., atomic particle collisions).
Inelastic Collision
Collision in which linear momentum is conserved, but kinetic energy is not conserved (lost as heat, deformation, sound).
1 Watt
Power when 1Joule of work is done in 1second (1W=1J/s).
1 Kilowatt-hour (kWh)
Commercial unit of electrical energy (1kWh=3.6×106Joules).
Conservative Force
Force where work done is path independent and depends only on initial/final points (e.g., Gravitational, Electrostatic, Spring force).
Non-Conservative Force
Force where work done depends on path taken (e.g., Friction, Viscous drag).
Radius of Gyration (k)
The perpendicular distance from rotation axis to a point where whole mass of body can be assumed concentrated for same moment of inertia: I=Mk2⇒k=MI. SI Unit: Meter (m).
Law of Conservation of Angular Momentum
If net external torque acting on a system is zero (τext=0), total angular momentum remains constant (L=Iω=constant). Example: A diver folds hands/legs during springboard jump to decrease moment of inertia I, increasing angular speed ω.
Rotational Analogues
Linear Displacement (s) → Angular Displacement (θ); Linear Velocity (v) → Angular Velocity (ω); Force (F) → Torque (τ); Mass (m) → Moment of Inertia (I).
Kepler's Law of Orbits
Planets revolve in elliptical orbits with Sun at one focus.
Kepler's Law of Areas
Line joining planet to Sun sweeps equal areas in equal time intervals (Areal velocity is constant; consequence of angular momentum conservation).
Kepler's Law of Periods
Square of time period T2∝r3 (cube of semi-major axis).
Weightlessness
State where effective normal reaction on body is zero (N=0) under free fall or in orbiting satellite. At center of Earth, acceleration due to gravity g=0, so weight = 0.
Orbital Velocity (vo)
Velocity required to orbit Earth in stable path (vo=gR≈7.92km/s).
Escape Velocity (ve)
Minimum velocity needed to escape Earth's gravity completely (ve=2gR≈11.2km/s). Relation: ve=2vo.
Hooke's Law
Within elastic limit, Stress is directly proportional to Strain (StrainStress=Modulus of Elasticity).
Young's Modulus (Y)
Tensile stress / Longitudinal strain.
Shear Modulus (G)
Shearing stress / Shearing strain.
Bulk Modulus (B)
Hydraulic stress / Volumetric strain.
Key Regions of Stress-Strain Graph for Metal Wire
Linear region up to Proportional Limit, followed by Yield Point (Elastic limit), Ultimate Tensile Strength (Maximum stress), and finally Fracture Point (wire breaks).
Pascal's Law
Pressure applied to an enclosed incompressible fluid is transmitted equally to every point of fluid. Applications: Hydraulic Lift, Hydraulic Brakes.
Bernoulli's Principle
For an incompressible, non-viscous streamline fluid flow, total energy per unit volume remains constant along streamline: P+21ρv2+ρgh=Constant (Pressure Energy + Kinetic Energy + Potential Energy).
Surface Tension (S)
Force per unit length on liquid surface line (S=LF, unit N/m).
Surface Energy
Work done per unit area to expand surface film (E=S×ΔA).
Angle of Contact (θ)
Angle inside liquid between liquid surface tangent and solid boundary.
Spherical Shape of Liquid Drops
Due to surface tension, liquid surfaces contract to minimize surface area. For a given volume, a sphere has the minimum surface area.
Newton's Law of Cooling
Rate of heat loss by a body is directly proportional to temperature difference between body and surroundings, provided difference is small: −dtdQ=k(T−T0).
Conduction
Heat transfer through material medium without actual movement of particles (Solids).
Convection
Heat transfer with actual bulk movement of liquid/gas particles (Fluids).
Radiation
Heat transfer via electromagnetic waves requiring no medium (e.g., Sun to Earth).
Anomalous Expansion of Water
Water contracts when heated from 0∘C to 4∘C (maximum density at 4∘C). Significance: Ice forms on top of lakes in winter while liquid water at 4∘C remains at bottom, preserving aquatic life.
Zeroth Law of Thermodynamics
If bodies A and B are each in thermal equilibrium with C, then A and B are in thermal equilibrium with each other (Defines Temperature).
First Law of Thermodynamics
Heat supplied ΔQ equals increase in internal energy ΔU plus work done ΔW (ΔQ=ΔU+ΔW).
Isothermal Process
Process where temperature remains constant (ΔT=0, ΔU=0, PV=constant, slow process).
Adiabatic Process
Process where no heat transfer into/out of system occurs (ΔQ=0, PVγ=constant, fast process).
Postulates of Kinetic Theory of Gases
Law of Equipartition of Energy
In thermal equilibrium, total energy is divided equally among all degrees of freedom, each contributing 21kBT energy per molecule.
Mean Free Path (l)
Average distance a molecule travels between successive collisions (l=2nπd21).
Simple Harmonic Motion (SHM)
Motion in which acceleration is directly proportional to displacement from mean position and directed toward mean position (a=−ω2x). Differential equation: dt2d2x+ω2x=0.
Phase Differences in SHM
Phase difference between Displacement and Velocity is 2πrad (90∘); Phase difference between Displacement and Acceleration is πrad (180∘).
Free Oscillations
Body oscillates with natural frequency without friction.
Damped Oscillations
Amplitude decreases exponentially over time due to resistive force.
Resonance
Driving frequency matches natural frequency, causing maximum amplitude.
Transverse Waves
Medium particles vibrate perpendicular to wave propagation direction (e.g., Light waves, Stretched string waves; forms Crests & Troughs).
Longitudinal Waves
Medium particles vibrate parallel to wave propagation direction (e.g., Sound waves; forms Compressions & Rarefactions).
Principle of Superposition
Net displacement when overlapping is vector sum of individual displacements (y=y1+y2).
Node
Point on standing wave with zero amplitude.
Antinode
Point on standing wave with maximum amplitude. Distance between consecutive nodes = 2λ.
Beats and Beat Frequency
Beats is the periodic variation in intensity of sound produced by superposition of two waves of slightly different frequencies. Beat Frequency: νbeat=∣ν1−ν2∣.