1/29
Lecture 15
What is additive Manufacturing?
builds a product up by adding material - contrast to subtractive (milling, turning, etc.)
very little scrap material compared to other methods
When is Additive Manufacturing used?
predominantly for prototyping
speed of production and strength/performance of parts still diminished when compared with conventional manufacturing methods
high value application: personalized parts where one size does not fit all
What is Fused Filament Fabrication (FFF)
most common hobby-level printers
spool of filament - heated block and nozzle - deposited on a build plate
deposition width limited by nozzle outlet diameter
what type of plastic does FFF printing use?
thermoplastics
What is a Bowden Tube in FFF printing
tube that houses and feeds the filament to the nozzle with the feed gears separate from the extruder
How is a Bowden tub advantageous?
management of space and environment
avoid filament snags
keep moisture - and temperature-sensitive filaments in a controlled environment until they’re melted
What is a Direct Drive? (FFF printing)
the filament is not housed in tubing and is fed directly into the nozzle with gears that are located on the extruder
What are the advantages of Direct Drive?
less distance for filament to buckle
can work better for preventing clogs especially with flexible filaments like TPU
Does FFF have alternative filaments?
yes, they can have flecks/strands of alternative materials suspended in the plastic
these can be abrasive, should use a hardened nozzle
What are common issues in FFF
not extruding at start
not sticking to bed
under-extrusion
over-extrusion
gaps in top layers
stringing or oozing
overheating
layer shifting
Are parts made with FFF completely solid?
no, they have infill patters
these help with faster printing, less material, less weight and less money used
common infill patterns include gyroid, cubic, rectilinear
what does the nozzle size determine for a print that is made with FFF
x and y resolution - details smaller than the resolution will not show up
what are the Pros to FFF printing
lowest cost to entry
material
wide variety of thermoplastics
mass produced filament keeps costs low
specialty filaments
easy to use/fix
durable prints
What are the cons to FFF printing?
low resolution
slow process
anisotropic properties
What is Stereolithography (SL/SLA)
oldest method of 3D printing
liquid bath of resin is selectively cured with laser, build plate raises for each layer
thermosets!
high detail, faster than FFF
usually requires rinse/wash and final cure as post processing
How did SLA printing originally work?
laser resides above vat of liquid resin, selectively cures top layer
expensive
vat of resin has to be at least as deep as the part
How does inverted SLA printing work?
laser shines through transparent bottom layer below vat of resin
very little resin dispensed at a time
How is Digital Light Processing different from SLA printing?
the entire image is displayed at once with a projector rather than “traced” with a single laser beam
How does Masked Stereolithography work?
light source is selectively covered, exposes entire layer at once
pixels of LCD mask panel determine resolution
What are the pros of SLA printing?
High accuracy
smooth prints / finer detail
solid geometry
isotropic material properties
“fast” (relatively speaking)
What are the cons of SLA printing
materials are expensive
printers are expensive
messy
post-processing required
How does Laser Sintering (SLS) work?
fine powder spread over bed by a recoater blade, selectively sintered by laser
fuses an area of particles together
What kind of materials does a Laster Sinter use?
plastics and metals
How solid are sintered parts compared to other methods?
not perfectly but about 95%dense
some strength reduction compared to conventional part
more susceptible to fatigue failure/crack propagation
What are the pros to Laser Sintering?
fair accuracy
fine detail prints
has the potential to not require support material
prints a variety of materials
metals can be heat treated and attain ~90% the “textbook” machined strengths
What are the cons to Laser Sintering?
metal “fiber laser” printers are expensive
limited re-use of powder
degrades with time and heat
Rank the three major types of 3D printing by resolution (high res=1, low res=2)
FFF (FDM)
SLA
SLS
SLA
SLS
FFF
Rank the three major types of 3D printing by affordability (1=most affordable, 3=least affordable)
FFF (FDM)
SLA
SLS
FFF
SLA
SLS
Which of the three major 3D printing methods requires that the designer specify density?
What would happen if the other two types of printing were to produce semi-hollow parts?
FFF
they would be filled with materials such as resin or powder since it would be captured during the printing process
Which of the three major types of 3D printing would be the best option for an application that must withstand high heat?
SLS *****