1/99
Looks like no tags are added yet.
C
These are two factors that usually determine the state in which matter exists.
A. Intermolecular attraction and pressure
B. Temperature and pressure
C. Intermolecular forces and temperature
D. Fluidity and temperature
D
It is the phenomenon where compounds exist in more than one crystalline and/or amorphous form.
A. Polymorph
B. Polymorphic form
C. Modification
D. Polymorphism
D
It is the process of the transformation of solids directly into the vapor phase without passing into the intermediate liquid phase.
A. Evaporation
B. Condensation
C. Distillation
D. Sublimation
E. All of the above
D
The following are substances that exhibit the phenomenon of sublimation except:
A. Camphor
B. Menthol
C. Naphthalene
D. None of the above
A
It is the study of the fundamental and derived properties of individual as well as a collection of particles.
A. Micromeritics
B. Rheology
C. Kinetics
D. Both A and B
E. Both A and C
D
Properties of drugs such as rate of absorption and hence the pharmacological activity depends on the ____:
A. Particle size
B. Particle shape
C. Size distribution
D. All of the above
D
This method is used to quantify particle size distribution in a powder.
A. Microscopic technique
B. Sedimentation of sieving technique
C. Sieving technique
D. All of the above
E. None of the above
C
This apparatus is generally used for the determination of particle size distribution by the sedimentation technique.
A. Coulter counter
B. Poiseuille capillary
C. Andreasen pipette
D. Reynold's cylinder
A
It is a popular instrument for measuring the powder particle volume.
A. Coulter counter
B. Poiseuille capillary
C. Andreasen pipette
D. Reynold's cylinder
D
This method is used to determine the surface area of a powder directly.
A. Absorption method
B. Adsorption method
C. Air permeability method
D. Either B or C
E. Either A or C
A
This instrument is generally used for determination of surface area by gas absorption method.
A. Quantasorb
B. Fisher sizer
C. Ostwald's U-tube capillary
D. All of the above
E. None of the above
B
This instrument is generally used for surface area determination by air permeability method.
A. Quantasorb
B. Fisher subsieve sizer
C. Ostwald's U-tube capillary
D. Kozency Carman device
E. None of the above
D
It is defined as the ratio of the void volume to bulk volume of the powder packing.
A. True volume
B. Bulk density
C. Specific bulk volume
D. Porosity
B
It is the ratio of the mass of the granular powder and the volume occupied by the granular material together with its intraparticle spaces.
A. True density
B. Granule density
C. Bulk density
D. Void density
C
It is defined as the ratio of the mass of the powder and its bulk volume.
A. True density
B. Granule density
C. Bulk density
D. Void density
D
It is defined as the maximum angle possible between the surface of a pile of powder and the horizontal plane.
A. Contact angle
B. Wetting angle
C. Sine of an angle
D. Angle of repose
B
It is the force acting between two immiscible liquid phases.
A. Surface tension
B. Interfacial tension
C. Cohesional tension
D. Both A and B
C
This method is suitable for measuring the surface tension and not for interfacial tension.
A. Wilhelmy plate method
B. Ring detachment method
C. Capillary rise method
D. All of the above
B
Which of the following statements is/are true about surfactants with HLB values of between 3 and 6?
A. Hydrophilic
B. Form w/o emulsions
C. Form o/w emulsions
D. Both A and B
A
Which of the following is/are true about surfactants with HLB values of 8 to 18?
A. Form o/w emulsions
B. Lipophilic
C. Form w/o emulsions
D. All of the above
C
The following statements are true about angle of repose of the powders except:
A. Angle of repose is a function of the surface roughness
B. As the particles become less and less spherical, the angle of repose increases and the bulk density and flowability decreases.
C. The angle of repose increases with an increase in particle size.
D. Addition of glidant decreases the angle of repose
A
The following statements are true about ideal gas equation except:
A. The volume of gas is directly proportional to the pressure.
B. The volume of gas is directly proportional to the number of moles.
C. The volume of gas is inversely proportional to the pressure.
D. The volume of gas is directly proportional to the absolute temperature.
E. None of the above
A OR C
It is also known as Van der Waals adsorption.
A. Physical adsorption
B. Chemical adsorption
C. Desorption
D. Chemisorptions
C
It is the opposite of adsorption.
A. Absorption
B. Porosity
C. Desorption
D. Either A or C
A
Reduction of the particle size of adsorbent will result in a/an ___ in the surface area and hence an increase in the adsorption.
A. Increase
B. Decrease
C. Either A or B
D. Neither A nor B
C
It is the reciprocal of viscosity.
A. Turbidity
B. Liquefied
C. Fluidity
D. Transparency
A
It is a phenomenon in which the material exhibits an increase in resistance to flow with increasing rate of shear.
A. Dilatancy
B. Thixotropy
C. Rheopexy
D. Hysteresis
B
It is the process of reformation of the gel structure after it has been deformed which can be accelerated by applying gentle and regular movements.
A. Hysteresis
B. Rheopexy
C. Thixotropy
D. Dilatancy
A
Which of the following gas laws relates volume and temperature at constant pressure?
A. Charles' law
B. Boyle's law
C. Newton's law
D. Avogadro's law
E. Ideal gas law
C
It is defined as a system in which the dispersed phase is distributed uniformly as particles throughout the dispersion medium or continuous phase.
A. Colloidal dispersion
B. Coarse dispersion
C. Dispersed system
D. Both A and B
D
The following are the different classifications of dispersed systems, except:
A. Molecular dispersions
B. Colloidal dispersions
C. Coarse dispersions
D. None of the above
E. All of the above
A
These are the two general methods used in preparing lyophobic colloids.
A. Dispersion and condensation
B. Dispersion and evaporation
C. Dispersion and distillation
D. Dispersion and freezing
E. None of the above
D
This is the potential difference set up between top to bottom of a suspension of solid particles in a liquid when the particles settle under the influence of gravity.
A. Electrophoresis
B. Streaming potential
C. Zeta potential
D. Sedimentation potential
C
A type of forces of attraction which involves the dispersion of charges to induce polarity between non polar molecules.
A. Ion-dipole forces
B. Debye forces
C. London forces
D. Keesom forces
E. Dipole induced-dipole
B
Suspensions and emulsions are two types of ____ dispersion.
A. Colloidal
B. Coarse
C. Either A or B
D. Neither A nor B
A
This is generally the first step during the formulation of suspension.
A. Wetting of particles
B. Controlled flocculation
C. Rheological alteration
D. Emulsification
E. None of the above
B
They act as flocculating agents by reducing the electric barrier between the particles as evidenced by a decrease in the zeta potential and the formation of a bridge between adjacent particles so as to loosely connected floc.
A. Non-electrolytes
B. Electrolytes
C. Organic solvents
D. Inorganic solvents
C
These are generally surfactants which lower the contact angle between the hydrophobic powder and the vehicle and may give particles a charge leading to a deflocculated dispersion.
A. Suspending agents
B. Emulsifying agents
C. Wetting agents
D. Clathrate-formers
E. None of the above
B
It is a system in which oil is the dispersed or discontinuous phase and water is the continuous phase.
A. Water-in-Oil emulsion
B. Oil-in-Water emulsion
C. Either A or B
D. Neither A nor B
E
H-bond is the interaction between a molecule containing a hydrogen atom and a strong electronegative atom such as fluorine, oxygen and nitrogen. This is/are true statement regarding H-bond.
I. Stronger than ionic bonds
II. Responsible for the formation of water molecules
III. Can be both occurring as an intermolecular and intramolecular force of attraction
A. I only
B. I and II only
C. I and III only
D. II and III only
E. III only
B
It is the ability of certain solutions to resist change in their pH upon addition of an acid or a base.
A. Buffer solution
B. Buffer action
C. Common ion effect
D. Both A and B
B
They usually consist of a mixture of a weak acid and one of its salt or a weak base and one of its salts.
A. Weak electrolytes
B. Buffer solutions
C. Strong electrolytes
D. Solvates
C
These are widely used in the field of pharmacy as ingredients in pharmaceutical formulations either to adjust the pH of the product to that required for maximum stability or for maintaining the pH of the product within the optimal physiological pH range.
A. Electrolytes
B. Isotonic solutions
C. Buffers
D. None of the above
D
The following are some methods generally followed for adjustment of tonicity, except:
A. Freezing point depression
B. White-Vincent's method
C. Sprowl's method
D. None of the above
E. All of the above
B
It is defined as the number of moles of solute dissolved in 1000 grams of solvent.
A. Molarity
B. Molality
C. Normality
D. Formality
E. None of the above
C
This law states that in a dilute solution, the mass of a gas which dissolves in given volume of a liquid at a constant temperature is directly proportional to the partial pressure of the gas.
A. Raoult's law
B. Graham's law
C. Henry's law
D. Dalton's law
B
This law states that the rate of diffusion of a solute molecule through a barrier is proportional to the concentration gradient.
A. Stoke's law
B. Fick's first law
C. Fick's second law
D. Noyes-Whitney law
D
A substance containing two or more donor groups may combine with a metal to form a special type of complex known as:
A. Channel lattice
B. Clathrates
C. Occlusion
D. Chelate
E. Inclusion
B
These are inclusion compounds in which a molecule of a "guest" compound gets entrapped within the cage-like structure formed by the association of several molecules of a "host" compound.
A. Channel lattice complexes
B. Clathrates
C. Intercalation compound
D. None of the above
D
How much NaCl is needed to adjust the following prescription to isotonicity?
Rx: Zinc sulfate 1% (E = 0.15)
NaCl
Purified water q.s. 60%
A. 0.60 g
B. 0.54 g
C. 0.75 g
D. 0.45 g
E. 0.50 g
C
A liquid whose viscosity is increased when stress is applied is classified as which of the following materials?
A. Newtonian flow
B. Plastic
C. Dilatant
D. Pseudoplastic
E. Thixotropy
E
An optical property of sols wherein there is a scattering of light in all directions in space.
A. Electrophoresis
B. Colloidal effect
C. Brownian movement
D. Elutriation
E. Tyndall effect
B
What is the pH of a buffer solution containing 0.15 moles each of acetic acid and sodium acetate in a liter of the buffer solution if the Ka of acetic acid is 1.75 × 10⁻⁵?
A. 3.5
B. 4.76
C. 4.0
D. 3.6
E. 3.0
A
Sodium chloride equivalents are used to estimate the amount of NaCl needed to render a solution isotonic. The E may be defined as:
A. Amount of NaCl that is theoretically equivalent to 1 g of specified chemical
B. Equivalent NaCl which is enough to make it a normal solution
C. Equivalent NaCl is enough to make an ophthalmic solution
D. Equivalent NaCl to resemble the isotonicity of blood
D
The reaction that causes degradation of drug molecules by normal sunlight or room light is:
A. Oxidation
B. Shelf-life
C. Reaction rate
D. Photolysis
E. Hydrolysis
D
These are certain number of ions that are attracted to the surface of the micelle, reducing the overall negative charge.
A. Anions
B. Cationic
C. Nonionic
D. Gegenions
E. Zwitterionic
B
The movement of a charged particle through a liquid under the influence of an applied potential difference.
A. Streaming potential
B. Electrophoresis
C. Sedimentation potential
D. Brownian movement
E. Tyndall effect
C
These are submicroscopic colloidal drug carrier systems composed of an oily or an aqueous core surrounded by a thin polymer membrane.
A. Micelles
B. Liposomes
C. Nanoparticles
D. Nanocrystals
E. Microemulsions
A
The units that constitute the crystal structure can be atoms, molecules or ions. Which substance(s) is/are crystal formation made of atoms?
I. Diamonds and graphite
II. Solid carbon dioxide and naphthalene
III. Sodium chloride
A. I only
B. II only
C. III only
D. I and II only
E. I, II, and III
C
An aqueous solution of exsiccated ferrous sulfate was prepared by adding 41.50 g of FeSO₄ to enough water to make 1000 mL of solution at 18 °C. Molecular weight of ferrous sulfate is 151.9. Calculate its molarity.
A. 0.302 M
B. 0.283 M
C. 0.273 M
D. 0.345 M
E. 0.367 M
D
Calculate the molality of ferrous sulfate prepared by adding 41.50 g of FeSO₄ to enough water to make 1000 mL of solution at 18 °C. The density of the solution is 1.0375 and the molecular weight of ferrous sulfate is 151.9.
A. 0.2843 m
B. 0.2756 m
C. 0.2890 m
D. 0.2743 m
E. 0.2967 m
D
Defined as the ratio of the moles of one constituent of a solution to the total moles of all constituents.
A. Molarity
B. Normality
C. Molality
D. Mole fraction
E. Mole percent
D
What is the pH of a solution containing 0.10 mole of ephedrine and 0.01 mole of ephedrine hydrochloride per liter of solution? The pKb of ephedrine is 4.64.
A. 9.36
B. 8.75
C. 7.90
D. 10.36
E. 10.68
D
The mole ratio of salt to acid in the salt-acid mixture is 1.74/1. Calculate the mole fraction of salt in percentage if the pH is 5.0 and the pKa value is 4.76.
A. 36.5%
B. 45.7%
C. 50.5%
D. 63.5%
E. 73.5%
B
These are surfactants that are used for the removal of dirt.
A. Anti-foaming
B. Detergent
C. Wetting agents
D. w/o agents
E. o/w agents
B
Process of forming light, fluffy conglomerates that are held together by weak Van der Waals forces.
A. Coalescence
B. Flocculation
C. Floc
D. Coalesce
B
Liberation of gases from solution in which they are dissolved upon addition of an electrolyte or non-electrolyte.
A. Salting-in
B. Salting-out
C. Branching out
D. Hydrogen bonding
E. Ionization
E
Process of separating colloidal particles and macromolecules is known as:
A. Microfiltration
B. Diffusion
C. Dialysis
D. Osmosis
E. Ultrafiltration
B
A liquid whose viscosity is increased when stress is applied is classified as which of the following:
A. Newtonian flow
B. Dilatant flow
C. Plastic flow
D. Pseudoplastic flow
E. Non-Newtonian flow
C
The upward movement of dispersed droplets relative to the continuous phase.
A. Sedimentation
B. Aggregation
C. Creaming
D. Coalescence
E. Setting
D
The natural shrinking of gel caused by coarsening of the matrix.
A. Bleeding
B. Swelling
C. Imbibition
D. Syneresis
E. Inhibition
C
The taking up of the liquid by a gel without a significant change in its volume.
A. Bleeding
B. Swelling
C. Imbibition
D. Syneresis
E. Inhibition
A
The liberation of oil or water from ointment base resulting from a deficient gel structure.
A. Bleeding
B. Swelling
C. Imbibition
D. Syneresis
E. Inhibition
C
These are cyclic oligomers of glucose that can form water-soluble inclusion complexes with small molecules and portions of large compounds.
A. Polymer complexes
B. Quinhydrone complexes
C. Cyclodextrins
D. Picric acid complexes
E. Olefins complexes
B
A test used for a drug product to assess the effect of severe conditions on the drug product.
A. Accelerated stability testing
B. Stress testing
C. Shelf-life testing
D. Photodegradation testing
E. None of the above
E
Calculate the final vapor pressure when 0.5 mole of sucrose is added to 1000 g of water at 20 °C. The vapor pressure of water at 20 °C is 17.54 mmHg. The vapor pressure lowering of the solution is 0.16 mmHg.
A. 0.16 mmHg
B. 0.20 mmHg
C. 11.22 mmHg
D. 15.64 mmHg
E. 17.38 mmHg
C
First-order half-life is equal to:
A. 1/k
B. k
C. 0.693/k
D. 2k + 1
E
The buffer equation is also known as:
A. Young's equation
B. Charles' law
C. Boyle's law
D. Stokes' law
E. Henderson-Hasselbalch equation
E
An isotonic solution has the same:
A. Salt content as blood
B. pH as blood
C. Specific gravity as blood
D. Fluid pressure as blood
E. Osmotic pressure as blood
A
A specific drug has a first-order biological half-life of 4 hours. This half-life value will:
A. Be independent of the initial drug concentration
B. Increase when the concentration of the drug increases
C. Decrease when the concentration of the drug increases
D. Decrease if the patient has renal impairment
E. Be the same whether the drug level is determined in the blood or by observing the pharmacological action
C
The biological half-life of a drug:
A. Is a constant physical property of the drug
B. Is a constant chemical property of the drug
C. Is the time for one-half of the therapeutic activity to be lost
D. May be decreased by giving the drug by rapid IV injection
E. Depends entirely on the route of administration
B
A species that can function either as an acid or a base.
A. Polyprotic
B. Ampholyte
C. Polymorphic
D. Zwitterions
E. Aprotic
A
A class I method of adjusting tonicity:
I. Cryoscopic method
II. NaCl equivalent method
III. White-Vincent method
IV. Sprowls method
A. I and II
B. II and III
C. III and IV
D. I and IV
E. I, II and III
B
A change in appearance, palatability, uniformity, dissolution and suspendability are examples of this kind of instability.
A. Chemical
B. Physical
C. Microbiologic
D. Therapeutic
C
A constituted drug solution assays at 1.5 mg/mL after 24 hours. What is the first-order reaction rate if the original solution concentration was 2.0 mg/mL?
A. 0.2/day
B. 0.25/day
C. 0.3/day
D. 0.33/day
E. 0.5/day
D
The following are non-Newtonian classes of flow, EXCEPT:
A. Plastic
B. Pseudoplastic
C. Dilatant
D. Parallel
E. Thixotropic
C
The form of the drug that undergoes apparent zero-order reaction kinetics.
A. Solids
B. Solutions
C. Suspensions
D. Solutions
E. Suppositories
A
Which gas law states that pressure is inversely proportional to the volume occupied?
A. Boyle's law
B. Ideal gas law
C. Charles' law
D. Gay-Lussac's law
A
Phenomenon wherein solubility is increased upon addition of salt.
A. Salting in
B. Precipitation
C. Salting out
D. Caking
B
What is the partial vapor pressure of gas K in a mixture having a mole ratio of 0.6 : 0.4?
(Note: The vapor pressures of gas K and gas N are 15 and 85 psi, respectively.)
A. 6 psi
B. 9 psi
C. 34 psi
D. 51 psi
C
What is the partial vapor pressure of gas N in a mixture having a mole ratio of 0.6 : 0.4?
(Note: The vapor pressures of gas K and gas N are 15 and 85 psi, respectively.)
A. 6 psi
B. 9 psi
C. 34 psi
D. 51 psi
B
If 0.50 g of a drug in the vapor state occupies 100 mL at 120 °C and 1 atm pressure, what is its approximate molecular weight?
A. 3.10 g/mole
B. 161.23 g/mole
C. 322.46 g/mole
D. 478.98 g/mole
C
A gas was found to exert a pressure of 1.17 atm when 6.07 g of the substance was confined in a 2 L vessel at 28 °C. What is the molecular weight of the gas?
A. 9.47 g/mole
B. 21.11 g/mole
C. 64.06 g/mole
D. 176.08 g/mole
B
The following statements are true for dustibility:
I. It is a measure of the cohesiveness of particles of a compacted powder
II. It characterizes free-flowing powders
III. It is related to the uniform spreading of dusting powders when applied to skin
A. I and II
B. II and III
C. I and III
D. I, II, and III
D
The following are methods of determining particle size:
I. Optical microscopy
II. Particle volume counter
III. Sedimentation
A. I and II
B. II and III
C. I and III
D. I, II, and III
C
Which of the following describes a structured vehicle?
I. Acts by entrapping the particles so that no settling occurs
II. Maintains flocculated particles in suspension
III. Pseudoplastic and plastic in nature
A. I and II
B. II and III
C. I and III
D. I, II, and III
D
TRUE statements regarding the derived properties of powders include:
I. Compaction is important in pharmaceutical tableting
II. Bulkiness is the reciprocal of bulk density
III. Large particles are free-flowing
A. I and II
B. II and III
C. I and III
D. I, II, and III
A
Which of the following statements is TRUE?
A. Powders of large surface area are good adsorbents
B. The average particle size by volume can be determined using gravity sedimentation method
C. Bulkiness increases with an increase in particle size.
D. In optical microscopy, the diameter of the particles can be obtained from the length, breadth and depth of the particle
C
Flow properties exhibited by powders:
I. Plastic flow
II. Pseudoplastic flow
III. Dilatant
A. I and II
B. II and III
C. I and III
D. I, II, and III
B
Interfacial properties of suspended particles include:
I. Creaming
II. Flocculation
III. Aggregation and caking
A. I and II
B. II and III
C. I and III
D. I, II, and III