1/26
Comprehensive vocabulary flashcards covering Grade 9 electric circuits, circuit components, Ohm's law, and series and parallel resistor calculations.
Electric Current
The flow of electric charge through a conductor; a greater quantity of charge passing in a shorter period of time produces a stronger current.

Conventional Current
The apparent flow of positive charge from the positive terminal of a cell through the external circuit to the negative terminal.

Ammeter
An instrument with very low resistance connected in series within a circuit to measure the electric current (the number of charges passing that point in one second).
Coulomb (C)
The standard unit of electric charge, defined as the amount of charge that passes a point in a conductor in one second when the current is one ampere; equal to the charge of 6.25×1018 electrons.
Charge Formula (Q=I×t)
The equation used to calculate electric charge, where Q is charge measured in coulombs (C), I is current measured in amperes (A), and t is time measured in seconds (s).
Potential Difference (Voltage)
The work done or energy transferred when one coulomb of charge moves between two points in an electric circuit.

Voltmeter
An instrument with very high resistance connected in parallel across components to measure the potential difference between two points without drawing current.
Voltage Formula (V=QW)
The mathematical relationship where V is potential difference in volts (V), W is work done or energy transferred in joules (J), and Q is charge in coulombs (C).
Cell
A source that supplies energy to electrical charges and maintains a potential difference by supplying charges at the positive terminal and withdrawing charges at the negative terminal.
Battery
A combination of two or more cells connected together, typically in series from positive terminal to negative terminal, to provide energy to circulating charges.
Cells Connected in Series
An arrangement where cells are connected positive terminal to negative terminal, causing the total potential difference to equal the sum of each cell: Vtotal=V1+V2+V3.

Cells Connected in Parallel
An arrangement where cells are connected positive-to-positive and negative-to-negative; the total potential difference is equal to the voltage of a single branch because each charge only passes through one cell branch.
Resistance (R)
The measure of difficulty charges experience when passing through a conductor, denoted by the symbol R and measured in ohms (Ω).
Electrical Conductor
A substance that allows the passage of electric charge, such as copper or aluminium.
Electrical Insulator
A substance that does not allow the passage of electric charge through it, such as glass or plastic.
Factors Influencing Resistance in a Conductor
The four physical characteristics determining resistance: metal type (e.g., copper has low resistance), length (longer wire means more resistance), thickness (thicker wire means less resistance), and temperature (higher temperature means higher resistance).
Series Circuit
A circuit in which components are connected one after the other in a single continuous line, providing only one path for electric current.
Resistors in Series Formula
The formula used to calculate total equivalent resistance in a series arrangement: Rtotal=R1+R2+R3.
Voltage Division in Series
The principle that series circuits divide total source voltage across each resistor (Vtotal=V1+V2+V3), with the largest resistor receiving the largest portion of voltage.
Current in a Series Circuit
The rule that electric current is identical at all points throughout a series circuit, regardless of where the reading is taken.
Parallel Circuit
A circuit configuration where each component is connected separately on its own individual branch, dividing the total current among the branches.
Resistors in Parallel Formula
The reciprocal formula used to calculate equivalent parallel resistance: R∥1=R11+R21+R31, which results in a total resistance lower than that of any individual branch.
Current in a Parallel Circuit
The principle that total circuit current equals the sum of currents in the individual parallel branches (Itotal=I1+I2+I3), meaning current entering a junction equals current leaving it.
Voltage in a Parallel Circuit
The condition where all parallel components and branches receive the full source voltage, meaning potential difference is identical across all parallel branches.
Ohm's Law
The law stating that the potential difference across a resistor is directly proportional to the current flowing through it (V∝I), provided the temperature remains constant; given by V=I×R.

Ohmic Material
A material that obeys Ohm's Law, characterized by a direct, linear relationship between potential difference and current, producing a straight line on a voltage-versus-current graph.

Circuit Diagram Symbols
Standardized graphical symbols used to represent circuit components, including open switches, single cells, multi-cell batteries, lamps, voltmeters, ammeters, fixed resistors, variable resistors, and electric motors.