1/160
Looks like no tags are added yet.
Five final aggregation procedures in an audit
Evaluate overall reasonableness
Reconcile
Review policies and disclosures
Test consolidation
Review working papers.
Purpose of an attorney inquiry (legal) letter
To corroborate management's representations regarding pending litigation, claims, and contingent liabilities.
Reason General Counsel inquiry is insufficient as corroborating evidence
General Counsel is an employee of the company and part of management, lacking external independence.
Purpose of the management representation letter
To document oral representations made by management throughout the audit and reduce misunderstandings or denials of responsibility.
Signatories required for the management representation letter
The Chief Executive Officer (CEO) and Chief Financial Officer (CFO).
Date required on the management representation letter
The audit report date (fieldwork completion date).
Audit report effect if management refuses to provide a representation letter
Constitutes a scope limitation resulting in either a qualified opinion or a disclaimer of opinion.
Accounting treatment for a remote loss contingency
Usually no accrual and no footnote disclosure required.
Accounting treatment for a reasonably possible loss contingency
Footnote disclosure only; no balance sheet liability accrual.
Accounting treatment for a probable and reasonably estimable loss contingency
Accrue the estimated liability on the balance sheet and disclose the details in the financial statement notes.
Accounting treatment for a probable but unestimable loss contingency
Footnote disclosure only; accrual is omitted because the amount cannot be reasonably estimated.
Subsequent event period
The timeframe extending from the balance sheet date through the date of the auditor's report.
Type I subsequent event (definition and treatment)
An event providing evidence about conditions that existed at the balance sheet date, requiring an adjustment to the financial statements.
Type II subsequent event (definition and treatment)
An event providing evidence about conditions that arose after the balance sheet date, requiring footnote disclosure only (and possibly pro forma statements).
Core question distinguishing Type I from Type II subsequent events
Did the underlying condition exist at the year-end balance sheet date?
Dual dating
Dating the audit report with two dates to limit auditor responsibility to a specific subsequently discovered event occurring after the completion of fieldwork.
Earliest allowable date for an audit report
No earlier than the date on which sufficient appropriate audit evidence has been obtained and management accepts responsibility for the financial statements.
MIRACL mnemonic components for subsequent events
Management representation letter, Inquiry, Read minutes, Asset valuation, Cutoff, and Legal letters.
Core going concern evaluation question
Can the entity survive for another fiscal year (one year beyond the date of the financial statements)?
Accounting changes requiring an explanatory paragraph for consistency
Change in accounting principle, change in reporting entity, and correction of a material misstatement requiring restatement.
Accounting changes not requiring an explanatory paragraph for consistency
Change in accounting estimate, correction of mathematical errors, format or presentation changes, and substantially different transactions or events.
Level of assurance provided by an audit
Reasonable assurance, not absolute assurance.
Nature of an audit conclusion (opinion vs. guarantee)
An opinion, never an absolute guarantee.
Standard order of sections in a private-company audit report
Title and Addressee
Opinion
Basis for Opinion
Responsibilities of Management and Auditors
Signature, Address, and Date
Signatory of the audit report
The audit firm, not the individual auditor.
Two fundamental reasons an audit opinion is modified
Lack of sufficient appropriate audit evidence (scope limitation)
Disagreement with management (departure from GAAP)
Audit circumstances resulting in a qualified opinion
A scope limitation or a departure from GAAP that is material but not pervasive.
Audit circumstances resulting in a disclaimer of opinion
A scope limitation that is both material and pervasive, or an impairment of auditor independence.
Audit circumstance resulting in an adverse opinion
A departure from GAAP that is both material and pervasive.
Five conditions required to issue an unmodified audit opinion
All four basic financial statements are present
Financial statements are free of material misstatements
Sufficient appropriate audit evidence has been obtained
Accounting estimates are reasonable
Disclosures are adequate
Representations NOT provided by an audit report
The report does not endorse the entity, guarantee future operational success, or guarantee ongoing viability.
Two options when another auditor performs part of the audit
Accept full responsibility and make no mention of the other auditor
Refer to the other auditor throughout the report to divide responsibility
Disclosure requirement when accepting full responsibility for another auditor's work
Do not mention or refer to the other auditor anywhere in the audit report.
Four questions determining reliance on another auditor
Can the principal auditor review the other auditor's work?
Were any significant issues identified?
Is the other auditor independent?
What is the other auditor's professional reputation?
Audit report when substantial doubt about going concern is adequately disclosed
Unmodified opinion with an explanatory (going-concern) paragraph.
Mandatory phrase required in a going-concern explanatory paragraph
"Substantial doubt."
Audit report consequence of inadequate going-concern disclosures
Qualified or adverse opinion due to departure from GAAP.
Auditor reporting action for a material GAAP departure when practical
Include the omitted or corrected financial information in an explanatory paragraph in the report.
Impact of an Emphasis-of-Matter paragraph on the audit opinion
It does not modify the opinion; the audit opinion remains unmodified.
Four common reasons for an Emphasis-of-Matter paragraph
Significant related-party transactions
Comparability or accounting changes
Important subsequent events
Material uncertainties properly disclosed in footnotes
Distinction between Emphasis-of-Matter and Other-Matter paragraphs
Emphasis-of-Matter: Refers to matters properly presented or disclosed within the financial statements.
Other-Matter: Refers to matters outside the financial statements relevant to understanding the audit, responsibilities, or report.
Key Audit Matter (KAM)
A matter communicated to governance that required especially significant auditor judgment and attention during the audit.
Relationship between modified report wording and a modified opinion
Modified wording does not automatically mean a modified opinion (e.g., adding explanatory paragraphs changes wording without modifying the opinion).
Two causes of audit scope limitations
Circumstance-imposed limitations
Client-imposed limitations
Current standard status of "Subject To" opinion wording
Prohibited under current auditing standards.
Specific phrase required in a qualified audit opinion
"Except for."
Reason "except for the scope limitation" is improper opinion wording
The qualification must be based on the possible effects on the financial statements, not the limitation itself.
Audit report issued when independence is impaired
Disclaimer of opinion (the auditor is not required to explain why independence is impaired).
Ultimate purpose of audit sampling
To draw conclusions about the characteristics of the entire population, not just the sample itself.
Characteristic of a representative sample
The sample reflects the characteristics, distribution, and properties of the entire population.
Reason clustered sampling creates audit risk
It selects items from concentrated segments and may fail to represent the entire population.
Precision formula in audit sampling
Precision=Tolerable Deviation Rate (TDR)−Expected Deviation Rate (EDR)
Effect of confidence level on sample size
As the desired confidence level increases, the required sample size increases.
Effect of tolerable error on sample size
As tolerable error increases, the required sample size decreases.
Effect of expected error on sample size
As expected error increases, the required sample size increases.
Sampling risk formula
Sampling Risk=1−Confidence Level
Computed Upper Deviation Rate (CUDR) formula
CUDR=Sample Deviation Rate+Allowance for Sampling Risk
Concept represented by the Computed Upper Deviation Rate (CUDR)
The estimated highest likely population deviation rate at a specified confidence level.
Effect of population size on sample size for large populations
Minimal effect; large population sizes have virtually no major impact on the necessary sample size.
Type I error in audit sampling (risk of incorrect rejection)
The risk of concluding that a control is ineffective or an account is materially misstated when it is actually acceptable (false positive, harming efficiency).
Type II error in audit sampling (risk of incorrect acceptance)
The risk of concluding that a control is effective or an account is fairly stated when it is actually materially flawed (false negative, harming effectiveness).
Reason Type II error is more severe than Type I error
It leads the auditor to inappropriately rely on ineffective controls or issue an unmodified opinion on misstated statements, decreasing audit effectiveness.
Primary difference between statistical and nonstatistical sampling
Statistical sampling applies the mathematical laws of probability to quantify sampling risk, whereas nonstatistical sampling relies strictly on auditor judgment.
Three advantages of statistical sampling
Designs efficient sample sizes\n- Objectively measures the sufficiency of audit evidence\n- Mathematically quantifies sampling risk
Three disadvantages of statistical sampling
Additional staff training required\n- Higher implementation costs\n- Inconsistent application across engagement teams
Best sampling approach for a heterogeneous population
Stratified sampling, which divides the varied population into homogeneous subgroups for tailored testing.
Variable type measured in attribute sampling
Binary variables (qualitative Yes/No conditions indicating the presence or absence of a deviation).
Primary application of attribute sampling in an audit
Tests of internal controls.
Three factors determining sample size in attribute sampling
Desired confidence level
Tolerable deviation rate (TDR)
Expected deviation rate (EDR)
Typical tolerable deviation rate when planned control risk is low
3% to 5%.
Auditor procedure when planned control risk is assessed at maximum
Omit tests of controls entirely and perform strictly substantive testing.
Sample deviation rate formula
Sample Deviation Rate=Sample SizeNumber of Deviations
Decision rule when Computed Upper Deviation Rate exceeds Tolerable Deviation Rate
Conclude that the internal control cannot be relied upon to support the assessed control risk level.
Four auditor actions when controls are less effective than expected
Expand the sample size\n- Raise the control risk assessment\n- Increase substantive testing procedures\n- Evaluate whether a significant deficiency or material weakness exists
Variable type measured in Monetary Unit Sampling (MUS)
Continuous dollar misstatements within account balances.
Sampling unit in Monetary Unit Sampling (MUS)
An individual dollar within an account balance.
Reason larger account balances are selected more frequently in MUS
Larger account balances contain more individual dollars, giving them a proportionally higher probability of selection.
Four balance-sheet accounts commonly tested using MUS
Accounts Receivable\n- Inventory\n- Loans Receivable\n- Investments
Two major limitations of Monetary Unit Sampling (MUS)
Zero or negative balances are not automatically selected without special sampling adjustments\n- Accounts with smaller balances have a low probability of selection
Known Misstatement (KM) vs. Projected Misstatement (PM)
Known Misstatement: The actual dollar difference found between audited and recorded values in the sample.\n- Projected Misstatement: The estimated total population misstatement extrapolated from sample findings.
Final decision rule comparing Upper Misstatement Limit (UML) to Tolerable Misstatement
If UML≤Tolerable Misstatement, accept the account balance as fairly stated.\n- If UML>Tolerable Misstatement, the account balance is potentially materially misstated, requiring more testing, adjustments, or a modified opinion.
Conditions making an audit procedure appropriate for interim testing
The account balance is stable, inherent and control risks are low, and the auditor is able to roll forward the audit results from the interim date to year-end.
Audit procedures commonly performed at an interim date
Tests of internal controls and preliminary substantive testing.
Audit procedures primarily conducted after year-end
The search for unrecorded liabilities and the review of subsequent events.
Timeframe covered by a cutoff bank statement
Typically covers the first 7 to 10 business days immediately following year-end.
Primary management assertions tested by sales cutoff testing
Occurrence and proper period recognition.
Primary management assertion tested by accounts receivable confirmations
Existence.
Distinction between kiting and lapping
Kiting is a fraud involving simultaneous bank transfers between accounts to artificially inflate cash balances, whereas lapping involves concealing stolen customer receipts using subsequent customer payments.
Key documents inspected during the search for unrecorded liabilities
Subsequent cash disbursements Vendor invoices Receiving reports Unpaid invoice files
Financial ratio effect of failing to record accrued liabilities
The current ratio will be overstated due to understated current liabilities.
Primary analytical sign indicating potential unrecorded liabilities
An unusually low accounts payable balance relative to historical trends or operating activity.
Primary purpose of an inquiry letter to external legal counsel
To corroborate and evaluate litigation, claims, and assessments that have been identified and disclosed by management.
Nature of legal evaluation provided in an attorney's response letter
The attorney does not provide a full legal opinion; they comment solely on identified pending or threatened litigation and the likelihood of unfavorable loss.
Distinction between pending litigation and unasserted claims
Pending litigation involves a lawsuit that already exists and is active, whereas an unasserted claim represents a potential legal claim that has not yet been formally filed.
Strongest versus weakest sources of audit evidence for litigation
Direct written response from external legal counsel is the strongest evidence, while management inquiry alone is the weakest.
Audit reporting consequence when legal counsel refuses to provide sufficient information
Represents a scope limitation that leads to a qualified opinion, or a disclaimer of opinion if the limitation is pervasive.
Auditor action when management and counsel obstruct obtaining evidence on legal matters
Withdrawal from the audit engagement.
Relationship between the management representation letter and substantive audit evidence
The representation letter complements and corroborates other audit procedures, but it can never serve as a substitute for substantive audit evidence.
Financial statement periods required to be covered by the management representation letter
All periods presented within the comparative financial statements under audit.
Signing requirement when current management was not present during prior audited periods
Current management is still required to sign the representation letter for all comparative periods presented.