HMB265 Section 2

0.0(0)
Studied by 1 person
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/306

encourage image

There's no tags or description

Looks like no tags are added yet.

307 Terms

1
New cards
What is a quantitative trait?
A trait showing continuous phenotypic variation rather than distinct qualitative categories.
2
New cards
How are many quantitative traits distributed?
They often show continuous variation and approximately a normal (bell-shaped) distribution.
3
New cards
Can quantitative traits have a genetic basis?
Yes. They can result from alleles at multiple loci, often with additive effects.
4
New cards
Why may simple Mendelian categories be hard to see in quantitative traits?
Environmental effects can mask the distinct phenotypic classes produced by different genotypes.
5
New cards
What is complete dominance?
One allele masks the effect of the other in the heterozygote.
6
New cards
What is incomplete dominance?
Neither allele is fully dominant; the heterozygote has an intermediate phenotype.
7
New cards
What is codominance?
Both alleles are expressed in the heterozygote.
8
New cards
What plant example illustrates incomplete dominance?

Antirrhinum (snapdragon) flower colour (white, pink, red)

9
New cards

What F2 phenotypic ratio is shown for snapdragon flower incomplete dominance?

1 A1A1 red : 2 A1A2 pink : 1 A2A2 white.
10
New cards
What is additive inheritance?
The phenotypic effect is calculated by adding the contributions of alleles.
11
New cards
How can the phenotypic effect be calculated at an additive A locus?
Count the number of A2 alleles; each A2 dose adds to the effect.
12
New cards

In the slide's single-locus example, what phenotype corresponds to 0, 1, and 2 doses of A2 in the snapdragon flower?

0 doses = white; 1 dose = pink; 2 doses = red.
13
New cards
How do you calculate an individual's total additive effect across loci?
Add the effects contributed by all relevant alleles across the loci.
14
New cards
What happens to the distribution as more additive loci contribute to a trait?
More phenotypic classes arise and the distribution increasingly resembles a normal distribution.
15
New cards
What is a frequency distribution?
A display of how frequently different trait measurements occur in a population.
16
New cards
How are quantitative measurements commonly displayed in a frequency distribution?
Measurements are grouped into bins, with frequency shown for each bin.
17
New cards

What two statistics are needed to graph a normal distribution?

The mean and standard deviation.
18
New cards
Approximately what proportion of a normal distribution lies within 1 standard deviation of the mean?
About 68%.
19
New cards
Approximately what proportion lies within 2 standard deviations of the mean?
More than 95% (about 95%).
20
New cards
What is Hypothesis 1 for the genetic origins of a quantitative trait?
Many loci segregate, each with small, equal, additive effects.
21
New cards
What is Hypothesis 2 for the genetic origins of a quantitative trait?
A few genes have large additive effects.
22
New cards
What does polygenic mean?
Multiple genes contribute to a phenotype.
23
New cards

How are quantitative traits described in the lecture?

Polygenic or multifactorial.

24
New cards
What key contributor must be considered in addition to genotype?
The environment.
25
New cards
What does P = G + E mean?
Phenotype = effects of genotype + effects of environment.
26
New cards
Can individuals with the same genotype show phenotypic variation?
Yes. Environmental differences can produce variation even among individuals with one genotype.
27
New cards
What does the Siamese cat example demonstrate?
Environmental modification: temperature affects whether a temperature-sensitive enzyme functions and melanin is produced.
28
New cards
Why is a Siamese cat's fur darker at its extremities?
Cooler extremities allow the temperature-sensitive enzyme to function, producing melanin and dark fur.
29
New cards
What happens to the temperature-sensitive enzyme in warmer regions of a Siamese cat?
It is nonfunctional, so melanin is not produced and the fur remains light.
30
New cards
What does the idealized additive-trait graph assume?
An identical environment, so phenotypic differences reflect genotype more directly.
31
New cards
Why do genotype-associated distributions overlap in the more realistic graph?
Environmental variation spreads the phenotypes associated with each genotype.
32
New cards
How can incomplete dominance contribute to continuous-looking quantitative variation?
Different genotypes have intermediate effects, and environmental variation further blends their phenotypes.
33
New cards
What condition is used as an example of incomplete dominance in humans?
Familial hypercholesterolaemia.
34
New cards
What causes familial hypercholesterolaemia in the lecture example?
Mutations affect genes involved in removing cholesterol from the blood.
35
New cards
How do homozygotes for the familial hypercholesterolaemia mutation differ from the general population?
They have very high blood cholesterol and can have heart attacks in childhood.
36
New cards

What is the cholesterol phenotype of familial hypercholesterolemia heterozygotes?

They have an intermediate cholesterol level.
37
New cards
Why can blood cholesterol measurements form a normal distribution across a population?
Genotype classes have different cholesterol levels, while environmental variation spreads and overlaps those classes.
38
New cards

Define a quantitative trait locus (QTL)

A locus whose additive allelic effects contribute to a complex trait, with individual phenotypic classes masked by the environment.
39
New cards
What do frequency distributions show in relation to a QTL?
They show the contributions of alleles at a QTL to a complex trait.
40
New cards
What is the central nature-versus-nurture question for quantitative traits?
How much phenotypic variation is attributable to genetic variation versus environmental variation?
41
New cards
What does VP = VG + VE mean?
Phenotypic variance equals genetic variance plus environmental variance.
42
New cards
What is broad-sense heritability (H²)?
The extent of phenotypic variation attributable to genetic variation.
43
New cards
What is the formula for broad-sense heritability?
H² = VG / VP.
44
New cards
What does H² = 1 mean?
All phenotypic variation is attributable to genotypic variation; this is the maximum.
45
New cards
What does H² = 0 mean?
All phenotypic variation is attributable to environmental effects; this is the minimum.
46
New cards
What does a high H² suggest?
Genotype is important in determining the trait variation in the population or family being considered.
47
New cards
If much phenotypic variation is attributable to genotypic variation, what happens to H²?
H² is close to 1.
48
New cards
What does high broad-sense heritability tell us about an individual in that family?
Their phenotype is likely attributable to their genotype in that family.
49
New cards
What does broad-sense heritability NOT predict?
An individual's precise phenotype based on their parents' phenotypes.
50
New cards
Why must H² be interpreted as family-specific in the lecture?
It does not tell us what is happening in other families.
51
New cards
What is the key distinction between H² and predicting offspring?
H² describes genetic contribution to variation; it does not by itself predict how progeny will perform from parental phenotypes.
52
New cards
How is genetic variance partitioned in the lecture?

VG = VA + VD + VI; genetic variance = variation due to additive effects + variation due to dominance effects + variation due to epistatic effects

53
New cards
Why can dominance effects make H² non-predictive of offspring phenotype?
Dominance relationships are not transmitted as a simple additive contribution from parent phenotype to offspring.
54
New cards
What example illustrates epistatic effects in the slides?
Tomato colour involving two loci, producing red, yellow, and green F2 phenotypes.
55
New cards
In the tomato example, what F2 genotype classes and colour counts are shown?
9 R1_R2_ red; 3 R1_r2r2 yellow; 3 r1r1_R2_ green; 1 r1r1_r2r2 green (4 green total).
56
New cards
Why can epistatic effects make broad-sense heritability non-predictive?
The phenotype depends on interactions between loci, not only on additive allele effects.
57
New cards
Which genetic variance component is especially useful for predicting resemblance between parents and offspring?
Additive genetic variance (VA).
58
New cards
What type of heritability focuses on additive genetic variation?
Narrow-sense heritability (h²).
59
New cards
What is narrow-sense heritability (h²)?
The extent of phenotypic variation attributable to additive genetic variation.
60
New cards
What is the formula for narrow-sense heritability?
h² = VA / VP.
61
New cards
What does h² = 1 mean?
All phenotypic variation is attributable to additive genetic variation; this is the maximum.
62
New cards
What does h² approaching 0 mean?
Phenotypic variation is attributable to other genetic effects and environmental effects rather than additive variation.
63
New cards
What does high narrow-sense heritability tell us?
An individual's phenotype is predictable from the phenotype of its parent in that family.
64
New cards
What does high h² indicate about the genes involved?
Specific additive-effect genes are involved.
65
New cards
What does h² NOT tell us?
What is happening in other families or which specific genes are responsible.
66
New cards
What relationship is shown between individuals' heights and their same-sex parent's height?
They are positively correlated.
67
New cards
What do the height scatterplots illustrate?
Taller same-sex parents tend, on average, to have taller offspring; the relationship is correlated, not exact.
68
New cards
What is the difference between broad- and narrow-sense heritability?
H² includes all genetic variance; h² considers only additive genetic variance.
69
New cards
Which heritability measure is more directly useful for predicting parent-offspring resemblance?
Narrow-sense heritability (h²), because it is based on additive genetic variation.
70
New cards
What is the research mention in Lecture 13 about?
A 2026 Science study on the functional landscape of coding variation in the familial hypercholesterolemia gene LDLR, using deep mutational scanning.
71
New cards
What is a quantitative trait?
A trait that shows continuous variation and is influenced by multiple genes (and often the environment).
72
New cards
What is a quantitative trait locus (QTL)?
A region of the genome associated with variation in a quantitative trait.
73
New cards
How are QTL identified?
By genetic mapping and looking for associations between genetic markers and the trait.
74
New cards
Can more than one QTL be identified at the same time?
Yes. Statistical methods can identify multiple QTLs at once.
75
New cards
What are the two broad stages used to dissect a quantitative trait?
1) Find the genome region(s) that may be involved. 2) Fine-map the trait to identify the gene or genes involved.
76
New cards
Why can several genes contribute to a quantitative trait?
A quantitative phenotype can be influenced by two or more important genes, each contributing to the overall phenotype.
77
New cards
What is the basic idea of genetic mapping for a quantitative trait?
Find genetic markers whose inheritance patterns (segregation) are associated with differences in the trait.
78
New cards
Why are controlled breeding studies especially useful in model organisms?
Large numbers of offspring can be bred and studied more easily than in humans.
79
New cards
Why is it important that the two parental inbred lines differ in the trait being studied?
If the parents do not differ in the trait, there may be no genetic variation for the cross to reveal as the basis of that trait.
80
New cards
What does an informative cross mean in this lecture?
A cross between two relatively inbred parental lines that differ in the trait of interest.
81
New cards
What limits the genetic diversity available in the initial mapping cross?
The genetic diversity present in the two parental strains used to start the cross.
82
New cards
What tomato lines were used to study fruit size?
Two inbred tomato lines with dramatically different fruit weights: one about 1 kg and one about 1 g.
83
New cards
Why were the two tomato lines useful for studying fruit size?
They differed dramatically in the trait, making it possible to investigate the genetic basis of fruit-size variation.
84
New cards
Why are F1 individuals heterozygous at the loci where the parents differ?
Each F1 receives one allele from each genetically different inbred parent.
85
New cards

Why does the F2 generation show substantial genetic variation in the tomato example?

Recombination during the gamete formation in the F1 creates many different combinations of parental alleles.

86
New cards
Why does recombination in the F1 lead to variation in the F2?
Random recombination produces different allele combinations in gametes, which combine to create diverse F2 genotypes and phenotypes.
87
New cards
Why is the F2 generation especially useful for QTL mapping?
It contains much of the genotype and phenotype variation needed to test whether marker alleles are associated with the trait.
88
New cards
What is measured in the F2 generation in the tomato fruit-size experiment?
Fruit weight (the phenotype) and genotypes at molecular marker loci.
89
New cards
What is the purpose of determining the frequency distribution of the F2 trait?
To describe how the phenotype varies among F2 individuals and relate that variation to marker genotypes.
90
New cards
What relationship might suggest that a marker is associated with tomato size?
Individuals homozygous for the small-fruit parent have small fruit, individuals homozygous for the large-fruit parent have large fruit, and heterozygotes are intermediate.
91
New cards
What is a molecular marker used for in QTL mapping?
It is used to genotype individuals so researchers can test whether particular genomic regions co-segregate with the trait.
92
New cards
What does it mean for a marker to co-segregate with a trait?
The marker allele and the trait are inherited together more often than expected by chance, suggesting they are linked or associated.
93
New cards
What does one band indicate in the professor's marker example?
One band indicates a homozygous genotype at that marker.
94
New cards
What would no association between a marker and fruit size look like?
Fruit size would not show a consistent relationship with which parental marker allele an individual carries.
95
New cards
What would an association between a marker and fruit size look like?

Marker genotype would correspond to a consistent pattern in fruit size, such as small-parent homozygotes having smaller fruit and large-parent homozygotes having larger fruit. Cosegregation.

96
New cards
Does every marker show an association with the quantitative trait?
No. Most loci will show segregation patterns with no association to the trait.
97
New cards
Why is a statistical test needed after visually inspecting marker and trait patterns?
Patterns may be imperfect because of environmental variation and chance; statistics determine whether the association is significant.
98
New cards
What can cause variation in fruit weight among individuals with a similar genotype?
Environmental effects can contribute to phenotypic variation.
99
New cards
What does a LOD score measure in QTL mapping?
The logarithm of the odds ratio comparing the likelihood of the observed data if a QTL is linked to a marker with the likelihood if there is no linkage.
100
New cards
What is the odds ratio (OR) in linkage analysis?
The probability of obtaining the data assuming linkage divided by the probability of obtaining the data assuming no linkage.