1/20
Flashcards covering the definitions, factors, measurement techniques, and estimation methods for infiltration and runoff in water resource engineering.
Infiltration
The process of water entry into a soil from rainfall, or irrigation.
Percolation
The process of water flow from one point to another point within the soil.
Infiltration Rate
The rate at which the water actually infiltrates through the soil during a storm, equal to the infiltration capacities or the rainfall rate, whichever is lesser.
Infiltration Capacity
The maximum rate at which a soil in any given condition is capable of absorbing water.
Hydraulic Conductivity
A measure of the soil’s ability to transmit water.
Water-retention characteristics
The ability of the soil to store and release water.
Bulk density
The ratio of the dry solid weight to the soil bulk volume, where bulk volume includes the volume of the solids and the pore space.
Areal measurement
Infiltration estimation accomplished by analysis of rainfall-runoff data from a watershed.
Point measurement
Infiltration measurements made by applying water at a specific site to a finite area and measuring the intake of the soil.
Ring or Cylinder Infiltrometers
Metal rings with a diameter of 30 to 100cm and a height of 20cm; intake is measured until a constant rate of infiltration is attained.
Double-ring infiltrometer
A ring infiltrometer with a second larger ring around it used to help eliminate the effect of lateral spreading.
Sprinkler infiltrometer
Also known as a rain simulator, it is used where the effect of rainfall on surface conditions influences the infiltration rate.
Tension infiltrometers
Devices used to determine the infiltration rates of soil matrix in the presence of macropores.
Furrow infiltrometers
Devices used when the effect of flowing water is important, as in furrow irrigation.
Horton Infiltration
A method where infiltration begins at a rate f0 and exponentially decreases until it reaches a constant fc.
Φ−index method
The simplest method calculated by finding infiltration as a difference between gross rainfall and observed surface runoff, assuming loss is uniformly distributed across the rainfall pattern.
Phillip method
An equation for cumulative infiltration defined as F(t)=St0.5+Kt, where S is sorptivity and K is hydraulic conductivity.
Sorptivity (S)
A function of the soil suction potential representing the soil suction head in the Phillip equation.
Green-Ampt method
An approximate model utilizing Darcy’s law developed with the assumption that water is ponded on the ground surface.
Macroporosity factor (A)
A factor used to determine effective hydraulic conductivity in ground cover areas assumed to contain macropores.
Crust factor (CRC)
A factor used to estimate effective hydraulic conductivity for bare areas outside canopy assumed to be crusted.