1/75
Looks like no tags are added yet.
Kirchoff's loop rule says that if you trace a path through the circuit, ∆V = 0 if
you start and end your loop at the same location
the circuit is in steady state
you start and end your loop at the same location
the circuit is in steady state
If a circuit is in steady state, it means
the potential difference is the same at all locations in the circuit
the current is the same at all locations in the circuit
the current is constant in time
the current is constant in time
explain: so despite the time the current in one distinct spot will keep being the same right? not to be confused with the current being the same at multiple spots along the circuit
Kirchoff's junction rule comes directly from [ Select ] ["the law of conservation of energy", "the law of conservation of charge", "the law of conservation of momentum", "Ohm's Law"] and says that [ Select ] ["the sum of the current coming into a junction must be equal to", "the sum of voltage changes through a closed loop"] must be equal to [ Select ] ["the current coming out of the battery", "zero", "the sum of the current coming out of the junction"] .
Answer 1:
the law of conservation of charge
Answer 2:
the sum of the current coming into a junction must be equal to
Answer 3:
the sum of the current coming out of the junction
A circuit is closed if [ Select ] ["the circuit elements and wires together make a loop that is connected in all locations", "there is a disconnect between a section of wire or two elements of the circuit"] . A circuit is open if [ Select ] ["the circuit elements and wires together make a loop that is connected in all locations", "there is a disconnect between a section of wire or two elements of the circuit"] .
Answer 1:
the circuit elements and wires together make a loop that is connected in all locations
Answer 2:
there is a disconnect between a section of wire or two elements of the circuit
In a closed loop, [ Select ] ["current cannot flow because there is not a complete path through the circuit", "current can flow because there is a path through the circuit"] . In an open loop, [ Select ] ["current cannot flow because there is not a complete path through the circuit", "current can flow because there is a path through the circuit"] .
Answer 1:
current can flow because there is a path through the circuit
Answer 2:
current cannot flow because there is not a complete path through the circuit
When tracing a loop in a circuit and looking at the rise and fall of electric potential or electric potential energy, this is analogous to
gravitational potential energy as a roller coaster moves along its track
two oppositely-charged particles feeling a mutual attraction due to Coulomb's Law
a ball thrown up in the air in a gravitational field
gravitational potential energy as a roller coaster moves along its track
In a DC circuit, current in a branch
always flows in the same direction (which depends on the circuit setup)
always flows in the counterclockwise direction
switches direction periodically
always flows in the same direction (which depends on the circuit setup)
In a circuit, a junction is
a place where two or more branches join together
a capacitor that joins two wires (one on each side)
a resistor that joins two wires (one on each side)
a place where two or more branches join together
Resistance is a property of [ Select ] ["the resistor or wire", "the material a resistor is made of"] . Resistivity is a property of [ Select ] ["the resistor or wire", "the material a resistor is made of"] .
Answer 1:
the resistor or wire
Answer 2:
the material a resistor is made of
For an Ohmic material, if you make a plot of potential difference (∆V) vs. current through the material, the shape would be
a straight line
a nonlinear plot
a straight line
Resistance depends physically on (i.e. can be changed by changing which of the following)
the material the resistor is made of
the resistor's shape
the current through the resistor
the voltage of the battery used in the circuit
the material the resistor is made of
the resistor's shape
Resistance is a property of a resistor that describes how easily [ Select ] ["current flows", "voltage drops", "resistivity changes"] through the resistor. Conductivity, which is [ Select ] ["proportional", "inversely proportional", "the inverse square of"] to resistance, is the measure of a material's ability to easily conduct electricity.
Answer 1:
current flows
Answer 2:
inversely proportional
Ideal conductors (e.g. ideal wires) have [ Select ] ["small", "zero"] resistance. Actual metal wires have [ Select ] ["small", "zero"] resistance.
Answer 1:
zero
Answer 2:
small
If a resistor's cross-sectional area increases, the resistance [ Select ] ["increases", "remains constant", "decreases"] . If a resistor's length increases, the resistance [ Select ] ["increases", "remains constant", "decreases"] .
Answer 1:
decreases
Answer 2:
increases
Resistivity of metals [ Select ] ["increases", "remains the same", "decreases"] as temperature increases. Conductivity of metals [ Select ] ["increases", "remains the same", "decreases"] as temperature increases.
Answer 1:
increases
Answer 2:
decreases
Ohm's Law is an experimental observation that for many materials, the potential difference across the circuit element is proportional to
the current through the circuit element
the resistance of the circuit element
the number of resistors in the circuit
the current through the circuit element
the resistance of the circuit element
Ohm's Law is valid for
all materials
only Ohmic materials (materials which are known to obey Ohm's Law)
only Ohmic materials (materials which are known to obey Ohm's Law)
What is the voltage drop across a 5 Ohm resistor that has a current of 0.5A passing through it?
10 V
2.5V
0.1V
2.5V
An electron volt is the amount of [ Select ] ["potential difference", "energy"] required to move an electron [ Select ] ["across a potential difference of 10^(-19) V", "across a potential difference of 1 V", "across a potential difference of 100 V", "1 meter", "up at a speed of 100 m/s", "up at a speed of 10^19 m/s"]
Answer 1:
energy
Answer 2:
across a potential difference of 1 V
About how many electron volts are in 1 Joule?
Group of answer choices
10^(-19)
10^(-10)
10^10
10^19
10^24
10^19
Power is
energy
force
force per unit time
energy per unit time
energy per unit time
The energy lost by a circuit element in a given amount of time is proportional to
the current through that circuit element
the mass of the circuit element divided by its volume
the net charge on the circuit element
the potential difference across the circuit element
the current through that circuit element
the potential difference across the circuit element
When current moves through a resistor, the resistor
gains energy
dissipates energy
dissipates energy
The definition of being in series is that
circuit elements are next to one another
the circuit elements have the same magnitude of current through each branch / circuit element, though not necessarily the same charges passing through each branch / circuit element
the circuit elements have the same potential difference across each branch of the circuit
a charge that passes through one circuit element MUST pass through all other circuit elements that are in series
a charge that passes through one circuit element MUST pass through all other circuit elements that are in series
For resistors in series, the equivalent resistance is given by
the sum of the resistances of the individual resistors
the difference of the resistance of the individual resistors
the resistance of the largest resistor
the resistance of the smallest resistor
1/Req = 1/R1 + 1/R2
the sum of the resistances of the individual resistors
When resistors are in series, adding a new series resistor
increases the overall resistance of the circuit
decreases the overall resistance of the circuit
increases the overall resistance of the circuit
Circuit branches in parallel
have the same charge pass through all circuit elements
directly connect two locations in a circuit via two (or more) different paths
have the same voltage drop across each branch
directly connect two locations in a circuit via two (or more) different paths
have the same voltage drop across each branch
When resistors are in parallel, adding a new parallel resistor
increases the overall resistance of the circuit
decreases the overall resistance of the circuit
decreases the overall resistance of the circuit
For resistors in parallel, the equivalent resistance is given by
the sum of the resistances of the individual resistors
the difference of the resistances of the individual resistors
the resistance of the largest resistor
the resistance of the smallest resistor
1/Req = 1/R1 + 1/R2
1/Req = 1/R1 + 1/R2
Imagine a group of resistors are replaced by a single resistor and the behavior of the rest of the circuit does not change. The resistance of this new, single replacement resistor is the equivalent resistance of the group of resistors.
TRUE
FALSE
TRUE
A 60W bulb does not always give off 60W of power. This is its power rating when it has 120V across it. Calculate the resistance in ohms of a 60W bulb by considering it in a circuit with just itself and a 120V battery. Enter the numerical part of your answer only (not the unit).
240
A 60W bulb does not always give off 60W of power. This is its power rating when it has 120V across it. Calculate the resistance in ohms of a 60W bulb by considering it in a circuit with just itself and a 120V battery. Enter the numerical part of your answer only (not the unit).
Repeat the procedure in the last question to find the resistance of a 100W light bulb. Enter the numerical part of your answer only (not the unit of Ω).
144
For a given light bulb (e.g. 60W), the resistance is [ Select ] ["can differ depending on", "is the same regardless of"] what circuit it is placed in because its resistivity and geometry do not change when it is placed in a new circuit. The resistance of a 60W light bulb [ Select ] ["is less than", "is greater than", "could be greater than or less than"] the resistance of a 100W light bulb.
Answer 1:
can differ depending on
Answer 2:
is greater than
A battery's EMF is / must be
its ideal potential difference
its potential difference when placed in a circuit
the electric force the battery provides to each charge moving through the battery
its ideal potential difference
The terminal voltage of a battery is
the potential difference measured between the positive and negative battery terminals
always equal to the battery's EMF
is equal to the battery's EMF when there is no current through the battery
is less than the battery's EMF when there is current through the battery
is greater than the battery's EMF when there is current through the battery
the potential difference measured between the positive and negative battery terminals
is equal to the battery's EMF when there is no current through the battery
is less than the battery's EMF when there is current through the battery
EMF stands for
electrolyte minimum force
electronic maximum force
electromotive force
electromotive force
Capacitors are
electrically neutral overall always when in circuits
electrically neutral when not connected in circuits, but positively-charged overall when connected in circuits
electrically neutral when not connected in circuits, but negatively-charged overall when connected in circuits
electrically neutral when not connected in circuits, but positively-charged overall if connected to the positive terminal of a battery
electrically neutral overall always when in circuits
In the definition of capacitance (Q=C∆V), Q means
the amount of charge on the positive plate of the capacitor
the amount of charge on the negative plate of the capacitor
the amount of charge on the negative plate of the resistor
the amount of charge on the positive plate of the resistor
the net charge of the capacitor
the net charge of the resistor
the capacitance of the capacitor
the voltage of the positive plate
the voltage of the negative plate
the potential difference between the positive and negative plate
the amount of charge on the positive plate of the capacitor
the amount of charge on the negative plate of the capacitor
The capacitance of a capacitor is determined physically by
the charge on the capacitor plates
the potential difference across the capacitor plates
the geometry of the capacitor
the dielectric (or lack thereof) between the conducting plates
the geometry of the capacitor
the dielectric (or lack thereof) between the conducting plates
A battery's internal resistance reduces the potential difference the battery can provide to the circuit when
the circuit contains capacitors
the circuit contains both capacitors and resistors
a current passes through the battery
no current passes through the battery
a current passes through the battery
In the definition of capacitance (Q=C∆V), C means
the amount of charge on the positive plate of the capacitor
the amount of charge on the negative plate of the capacitor
the amount of charge on the negative plate of the resistor
the amount of charge on the positive plate of the resistor
the net charge on the capacitor
the net charge on the resistor
the capacitance of the capacitor
the voltage of the positive plate
the voltage of the negative plate
the potential difference between the positive and negative plate
the capacitance of the capacitor
A capacitor is
two conductors that are close but not touching in order to separate equal but opposite charge on each conductor
two insulators that are close but not touching in order to separate equal but opposite charge on each conductor
two insulators that are close but not touching in order to separate equal charge of the same sign on each conductor
two conductors that are close but not touching in order to separate equal charge of the same sign on each conductor
two conductors that are close but not touching in order to separate equal but opposite charge on each conductor
A dielectric is
material placed on the outside of the capacitor plates to decrease the capacitance
material placed between the plates of the capacitors in order to increase capacitance
material placed between the plates of the capacitors in order to decrease capacitance
material placed on the outside of the capacitor plates to increase the capacitance
material placed between the plates of the capacitors in order to increase capacitance
In the definition of capacitance (Q=C∆V), (∆V) means
the amount of charge on the positive plate of the capacitor
the amount of charge on the negative plate of the capacitor
the amount of charge on the negative plate of the resistor
the amount of charge on the positive plate of the resistor
the net charge on the capacitor
the net charge on the resistor
the capacitance of the capacitor
the voltage of the positive plate
the voltage of the negative plate
the potential difference between the positive and negative plate
the potential difference between the positive and negative plate
The dielectric constant is
the factor by which capacitance increases when a dielectric is added to a capacitor
the factor by which capacitance decreases when a dielectric is added to a capacitor
the number added to the capacitance value when a dielectric is added to a capacitor
the factor by which capacitance increases when a dielectric is added to a capacitor
The SI unit of capacitance is a [ Select ] ["Farad", "Volt", "Joule", "Coulomb", "Newton", "Ohm", "Ampere"] , which is equal to [ Select ] ["Volt / Coulomb", "Farad / Newton", "Newton / Farad", "Ohm / Ampere", "Newton / Coulomb", "Coulomb / Volt"] .
Answer 1:
Farad
Answer 2:
Coulomb / Volt
We have a capacitor that starts neutral. We connect it to a battery until it reaches equilibrium and then disconnect it. Which of the following is true about the capacitor?
i. Charge has accumulated on both plates
ii. Electric potential energy is stored in the capacitor
iii. There is an electric field between the two plates
iv. There is a potential difference between the two plates
Group of answer choices
i, ii, iii, and iv
i, ii, and iii only
i and iii only
i, ii, and iv only
i and ii only
i, ii, iii, and iv
The potential energy stored in the capacitor is equal to
Group of answer choices
the potential difference across the capacitor
the voltage of the positive plate of the capacitor
the square of the charge divided by twice the capacitance
the square of the capacitance divided by twice the charge
the square of the charge divided by twice the capacitance
The potential energy stored in a capacitor is (1/2)Q^2/C. Why does the potential energy in this expression not given by Q^2/C, which you would obtain by substituting the definition of capacitance into the definition of electric potential?
Group of answer choices
As the capacitor charges, the potential difference across the plates varies according to Q=CV, so an integral is required to calculate the work.
As the capacitor charges, the potential difference across the plates is constant.
As the capacitor charges, the potential difference across the plates varies according to Q=CV, so an integral is required to calculate the work.
Magnetic fields are created by
Group of answer choices
stationary positive charges
stationary negative charges
permanent magnets
currents
permanent magnets
currents
Which of the following objects can feel a magnetic force?
stationary positive charges
stationary negative charges
permanent magnets
currents
moving positive charges
moving negative charges
stationary neutral charges
moving neutral charges
permanent magnets
currents
moving positive charges
moving negative charges
True or false: The strength of a magnetic field at a point is proportional to the density of field lines at that point.
Group of answer choices
True
False
True
Electric field vectors are [ Select ] ["tangent to", "perpendicular to"] to electric field lines.
Magnetic field vectors are [ Select ] ["tangent to", "perpendicular to"] to magnetic field lines.
Answer 1:
tangent to
Answer 2:
tangent to
A permanent magnet [ Select ] ["always has both a north and south pole", "must always have a north pole and sometimes has a south pole", "must always have a south pole and sometimes has a north pole", "must always have a south pole and never has a north pole", "must always have a north pole and never has a south pole"] . A current loop (which acts as a magnet) [ Select ] ["always has both a north and south pole", "must always have a north pole and sometimes has a south pole", "must always have a south pole and sometimes has a north pole", "must always have a south pole and never has a north pole", "must always have a north pole and never has a south pole"] .
Answer 1:
always has both a north and south pole
Answer 2:
always has both a north and south pole
Magnetic field lines ___ a current
Group of answer choices
are directed radially outward from
are directed radially inward from
form loops encircling
form loops encircling
True or false: it is possible to find an isolated magnetic North Pole (which does not have a nearby South Pole).
Group of answer choices
True
False
False
Inside a permanent bar magnet, field lines point [ Select ] ["south to north", "north to south", "east to west", "west to east"] . Exiting a permanent bar magnet, field lines exits from the [ Select ] ["south", "west", "north", "east"] and enter at the [ Select ] ["south", "east", "north", "west"] pole.
Answer 1:
south to north
Answer 2:
north
Answer 3:
south
Magnetic field lines [ Select ] ["start and end on charges", "are closed loops that do not start or end"] . Electric field lines
Answer 1:
are closed loops that do not start or end
Answer 2:
start and end on charges
The magnetic field vector at a specific location P due to a long current points
Group of answer choices
in one specific direction
in either a clockwise or counterclockwise loop
in one specific direction
The Biot-Savart law gives the [ Select ] ["magnetic force", "magnetic field", "magnetic charge", "magnetic pole"] a distance [ Select ] ["µ_0", "I", "r"] away from a [ Select ] ["long current", "infinite plate of charge", "infinite charged rod", "single charged particle moving in a straight line"] . To find the magnetic field direction, we put our [ Select ] ["fingers", "thumb", "pointer finger", "middle finger"] in the direction of the current. Fingers curl in the direction of the [ Select ] ["magnetic force on a positive charge", "magnetic force on a negative charge", "magnetic field line"] .
Answer 1:
magnetic field
Answer 2:
r
Answer 3:
long current
Answer 4:
thumb
Answer 5:
magnetic field line
When determining direction in magnetic field problems, we use the [ Select ] ["right hand rule", "left hand rule"] for fields and the [ Select ] ["right hand rule", "left hand rule"] for force. These are [ Select ] ["the same rule", "two different rules"] .
Answer 1:
right hand rule
Answer 2:
right hand rule
Answer 3:
two different rules
To find the magnetic field at a location due to two nearby wires, we add the fields as [ Select ] ["vectors", "scalars"] following [ Select ] ["energy conservation", "charge conservation", "superposition", "kinematics"] .
Answer 1:
vectors
Answer 2:
superposition
When showing the direction of a current, moving charge, or field, a dot with a circle around it signifies [ Select ] ["into the page/screen", "out of the page/screen", "to the left", "to the right", "up", "down"] . An x, sometimes with a circle around it, signifies [ Select ] ["into the page/screen", "out of the page/screen", "left", "right", "up", "down"] .
Answer 1:
out of the page/screen
Answer 2:
into the page/screen
When two capacitors are connected in series, and are in equilibrium, they must have the same
(i) charge on their plates
(ii) potential difference between the positive and negative plate
(iii) capacitance
i, ii, and iii
i only
ii only
iii only
i only
When two capacitors are connected in parallel, and are in equilibrium, they must have the same
(i) charge on their plates
(ii) potential difference between the positive and negative plate
(iii) capacitance
i, ii, and iii
i only
ii only
iii only
ii only
Equivalent capacitance of capacitors in series is found with
Ceq = C1 + C2
1/Ceq = 1/C1 + 1/C2
1/Ceq = 1/C1 + 1/C2
When capacitors are in series
it increases the overall capacitance of the circuit
it decreases the overall capacitance of the circuit
it decreases the overall capacitance of the circuit
When capacitors are in parallel
it increases the overall capacitance of the circuit
it decreases the overall capacitance of the circuit
it increases the overall capacitance of the circuit
Equivalent capacitance of capacitors in parallel is found with
Ceq = C1+C2
1/Ceq = 1/C1 + 1/C2
Ceq = C1+C2
When determining direction in magnetic field problems, we use the [ Select ] ["right hand rule", "left hand rule"] for fields and the [ Select ] ["right hand rule", "left hand rule"] for force. These are [ Select ] ["the same rule", "two different rules"] .
Answer 1:
right hand rule
Answer 2:
right hand rule
Answer 3:
two different rules
To find the magnetic field at a location due to two nearby wires, we add the fields as [ Select ] ["vectors", "scalars"] following [ Select ] ["energy conservation", "charge conservation", "superposition", "kinematics"] .
Answer 1:
vectors
Answer 2:
superposition
The magnetic field vector at a specific location P due to a long current points
Group of answer choices
in one specific direction
in either a clockwise or counterclockwise loop
in one specific direction
Which of the following feels a nonzero force in a constant magnetic field?
Group of answer choices
a negatively-charged particle initially at rest
a negatively-charged particle initially moving in the direction of the magnetic field
a negatively-charged particle initially moving any direction except the direction parallel or antiparallel to the magnetic field
a positively-charged particle initially at rest
a positively-charged particle initially moving in the direction of the magnetic field
a positively-charged particle initially moving any direction except the direction parallel or antiparallel to the magnetic field
a negatively-charged particle initially moving perpendicular to the magnetic field
a positively-charged particle initially moving perpendicular to the magnetic field
a negatively-charged particle initially moving any direction except the direction of the magnetic field
a positively-charged particle initially moving any direction except the direction of the magnetic field
a negatively-charged particle initially moving perpendicular to the magnetic field
a positively-charged particle initially moving perpendicular to the magnetic field
To find the magnetic force direction on a positive charge, use the right hand.
Put the [ Select ] ["left", "right", "pointer finger", "thumb", "middle finger"] in the direction of the charge's velocity.
Put the [ Select ] ["pointer finger", "thumb", "middle finger"] in the direction of the magnetic field.
The [ Select ] ["pointer finger", "thumb", "middle finger"] points [ Select ] ["in the", "in the opposite"] direction of the magnetic force felt by the charge.
Answer 1:
pointer finger
Answer 2:
middle finger
Answer 3:
thumb
Answer 4:
in the
To find the force that long current ONE exerts on long current TWO, first [ Select ] ["find the magnetic field due to current ONE at the location of current TWO", "find the magnetic field due to current TWO at the location of current ONE"] . The use the [ Select ] ["right hand rule for magnetic force", "right hand rule for magnetic fields", "left hand rule for magnetic force", "left hand rule for magnetic fields"] to find the force felt by [ Select ] ["current ONE", "current TWO"] due to the [ Select ] ["field created by current TWO", "field created by current ONE", "field created by both current ONE and current TWO"] .
Answer 1:
find the magnetic field due to current ONE at the location of current TWO
Answer 2:
right hand rule for magnetic force
Answer 3:
current TWO
Answer 4:
field created by current ONE
To find the magnetic force direction on a negative charge, use the right hand.
Put the [ Select ] ["pointer finger", "thumb", "middle finger"] in the direction of the charge's velocity.
Put the [ Select ] ["pointer finger", "thumb", "middle finger"] in the direction of the magnetic field.
The [ Select ] ["pointer finger", "thumb", "middle finger"] points [ Select ] ["in the", "in the opposite"] direction of the magnetic force felt by the charge.
Answer 1:
pointer finger
Answer 2:
middle finger
Answer 3:
thumb
Answer 4:
in the opposite