Day 9 | Switch Interfaces

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/22

encourage image

There's no tags or description

Looks like no tags are added yet.

23 Terms

1
New cards

In the output of show ip interface brief, router interfaces will be in the […]/[…] state by default.

administratively down/down

2
New cards

In the output of show ip interface brief, switch interfaces will be in the […]/[…] state by default if connected to another device.

up/up

3
New cards

In the output of show ip interface brief, switch interfaces will be in the […]/[…] state by default if not connected to another device.

down/down

4
New cards

What is the default speed setting of an interface?

auto

5
New cards

What is the default duplex setting of an interface?

auto

6
New cards

"Configure a speed of 100 Mbps on an interface: SW1(config-if)# […]"

speed 100

7
New cards

"Configure full duplex on an interface: SW1(config-if)# […]"

duplex full

8
New cards

Which command lets you configure multiple interfaces at the same time?

interface range

9
New cards

In […] duplex mode, an interface can send and receive data at the same time.

full

10
New cards

In […] duplex mode, an interface cannot send and receive data at the same time.

half

11
New cards

Ethernet hubs operate at Layer […] of the OSI model.

1

12
New cards

Ethernet devices use […] to detect and prevent collisions on half-duplex interfaces.

CSMA/CD

13
New cards

What does CSMA/CD stand for?

Carrier Sense Multiple Access with Collision Detection

14
New cards

All devices connected to an Ethernet hub are in the same […] domain.

collision

15
New cards

Are all devices connected to an Ethernet switch in the same collision domain?

No

16
New cards

Devices attached to an Ethernet hub must operate in […] duplex mode.

half

17
New cards

Devices attached to a switch can operate in […] duplex mode.

full

18
New cards

Which show interfaces error counter? -Counts frames that are smaller than the minimum frame size (64 bytes)

runts

19
New cards

Which show interfaces error counter? -Counts frames that are larger than the maximum frame size (1518 bytes)

giants

20
New cards

Which show interfaces error counter? -Counts frames that failed their error check in the Ethernet FCS trailer.

CRC

21
New cards

Which show interfaces error counter? -Counts frames that have an incorrect/illegal format.

frame

22
New cards

Which show interfaces error counter? -Total of various counters of errors received by the device

input errors

23
New cards

Which show interfaces error counter? -Frames the switch tried to send, but failed due to an error

output errors