1/28
Vocabulary flashcards reviewing mechanical advantage calculations, simple machines, lever classes, and pulley systems from Sections 14.3-14.4.
Mechanical Advantage (MA)
A ratio comparing forces (output÷input) or distances (input÷output) that has no units.
Ideal Mechanical Advantage
The mechanical advantage calculated using distance and size formulas, which assumes there is no friction.
Resistance Force (FR)
The resistance or output force of a machine, measured in newtons (N).
Effort Force (FE)
The effort or input force applied to a machine, measured in newtons (N).
Force Formulas for Mechanical Advantage
MA=FR÷FE, which rearranges to FR=MA×FE and FE=FR÷MA.
Distance Formulas for Mechanical Advantage
MA=DE÷DR, which rearranges to DE=MA×DR and DR=DE÷MA.
Mechanical Advantage of a Pulley (Distance)
Calculated by dividing the rope pulled by the load rise (rope pulled÷load rise).
Mechanical Advantage of a Lever (Distance)
Calculated by dividing the fulcrum-to-effort distance by the fulcrum-to-load distance (fulcrum-to-effort distance÷fulcrum-to-load distance).
Mechanical Advantage of a Wheel and Axle
MA=rwheel÷raxle, where radii are in matching units and effort is assumed to be applied to the wheel.
Mechanical Advantage of an Inclined Plane
MA=L÷h, where L is the length along the slope and h is the vertical height in matching units.
MA>1
A condition indicating that the machine produces more output force than input force.
MA=1
A condition indicating that the output force and input force are equal.
MA<1
A condition indicating that the machine gives less output force, but can help the load move farther or faster.
Simple Machines
Devices that make work easier by reducing effort, increasing the distance you apply effort over, or changing the direction of the force.
Compound Machine
A machine that combines two or more simple machines, such as a bicycle.
Inclined Plane
A slope that helps raise or lower objects; for the same height, a gentler ramp takes less force over a longer distance (e.g., ramps, stairs, slides).
Wedge
A pointed inclined plane where pushing down can create sideways force to split material or hold something in place (e.g., an ax, nail, shovel, knife).
Screw
An inclined plane wrapped around a cylinder; closer threads take less effort and more turns for the same distance (e.g., a screw, threaded jar lid).
Wheel and Axle
A simple machine where a wheel and rod rotate together; a larger wheel radius gives more leverage when effort is applied to the wheel (e.g., steering wheel, turning a screwdriver).
Lever
A bar that pivots around a fulcrum; with the load in the same spot, applying effort farther from the fulcrum increases MA.
Fulcrum
The fixed pivot point around which a lever turns.
Pulley
A grooved wheel that guides a rope or belt to raise or lower a load (e.g., a well, window shade, crane).
F-L-E = 1-2-3
A mnemonic for lever classes indicating the middle component: 1st class has the fulcrum in the middle, 2nd class has the load in the middle, and 3rd class has the effort in the middle.
First-Class Lever
A lever with the fulcrum in the middle; examples include a seesaw, scissors, pliers, or a screwdriver prying a lid.
Second-Class Lever
A lever with the load in the middle; examples include a wheelbarrow or nutcracker.
Third-Class Lever
A lever with the effort in the middle; examples include tweezers, a broom, or a forearm lifting a weight.
Fixed Pulley
A pulley whose wheel stays in place; pulling down causes the load to rise, with an ideal MA=1.
Movable Pulley
A pulley whose wheel moves with the load; pulling up lifts the load, with an ideal MA=2.
Combined Pulley System
A system where fixed and movable pulleys work together; pulling down while two rope sections support the moving pulley gives an ideal MA=2.