1/105
Looks like no tags are added yet.
The subject of Mechanics deals with what happens to a body when ______ is/are applied to it.
forces
____________ still remains the basis of most of today's engineering sciences.
Newtonian Mechanics
Evaluate the situation in which mass (kg), force (N), and length (m) are the base units and recommend one of the following:
- A new system of units will have to be formulated
- Only the unit of time has to be changed from second to something else
- The above situation is not feasible
- No changes required
No changes required
Give the most appropriate reason for using three significant figures in reporting results of typical engineering calculations
Most of the original data used in engineering calculations do not have accuracy better than one percent.
For a static's problem, your calculations show the final answer as 12345.6 N. What would you write as your final answer?
12.3 kN
In the three-step approach to problem solving called IPE, what does P stand for?
PLAN
Which of the following is a scalar quantity?
-Force
-Mass
-Acceleration
-Position
-Velocity
MASS
For vector addition, you have to use ______ law.
the parallelogram
Can you resolve a 2-D vector along two directions which are not at 90 degrees to each other?
Yes, Uniquely
Can you resolve a 2-D vector along three directions?
Yes, but not Uniquely
Vector algebra, as we are going to use it, is based on a ___________ coordinate system.
right-handed
The symbols, (alpha), (beta), and (gamma) designate the _____ of a 3-D Cartesian vector.
coordinate direction angles
If you know only Ua, you can determine the _____ of A uniquely.
angles (alpha, beta, gamma)
What is not true about a unit vector?
- It is dimensionless
- It always points in the direction of vector A
- It always points North
- It always points in the direction of positive x-axis
- Its magnitude is one
It always points in the direction of positive x-axis
If F = {10 i + 10 j + 10 k} N and G = {20 i + 20 j + 20 k } N, then F + G = { ____ } N
30i+30j+30k
The position vector r_PQ is obtained by
coordinates of Q minus coordinates of P
A force of magnitude F, directed along a unitvector u, is given by F = ______ .
F (U)
P and Q are two points in 3-D space. How are the position vectors r_PQ and r_QP related?
r_PQ = -r_QP
If F and r are force and position vectors, respectively, in SI units, what are the units of the expression (r*(F/F))
Meters
Two points in 3-D space have coordinates of P(1,2,3) and Q(4,5,6) meters. The position vector r_QP is given by what?
{-3i-3j-3k} m
A force vector, F, directed along a line defined by PQ is given by
F (r_PQ/r_PQ)

How do you define the dot product of two vectors P and Q?
PQ cos(theta)
The dot product of two vectors results in a _______ quantity.
scalar
If a dot product of two non-zero vectors is 0, then the two vectors must be ___________ to each other.
perpendicular
If a dot product of two non-zero vectors equals-1, then the vectors must be ____________ to each other.
collinear but pointing in the opposite direction
The dot product can be used to find all of the following except ___________
the sum of two vectors
Find the dot product of the two vectors P and Q:
P={5i+2j+3k} m
Q={-2i+5j+4k} m
12m^2
When a particle is in equilibrium, the sum of forces acting on it equals _______.
zero
For a frictionless pulley and cable, tensions in the cable (T1 and T2) are related as what?
T1 = T2

Assuming you know the geometry of the ropes, in which
system above can you NOT determine the forces in the
cables?
Why?
There are more unknowns than equations.
Particle P is in equilibrium with five forces acting on it in 3-D space. How many scalar equations of equilibrium can be written for point P?
Three
In 3-D, when you know the direction of a force but not its magnitude, how many unknowns corresponding to that force remain?
One
If a particle has 3-D forces acting on it and is in static equilibrium, the components of the resultant force (Σ Fx, Σ Fy, and Σ Fz ) ___ .
have to be equal to zero (0i+0j+0k)
In 3-D, when you don't know the direction or the magnitude of a force, how many unknowns do you have corresponding to that force?
Three
If M = r x F, then what will be the value of M . r?
0
If r = { 5 j } m and F = { 10 k } N, the moment r × F equals { _______ } Nm.
50i
When determining the moment of a force about a specified axis, the axis must be along _____________
any line in 3-D space
The triple scalar product u • ( r x F ) results in
a scalar quantity ( + or - ).
The vector operation (P x Q) • R equals
R • (P x Q)

Resolve F along the x and y axes and write it in vector form
80sin(30)i - 80cos(30)j
Determine the magnitude of the resultant (F1+F2) force in N when F1 = {10i+20j}N and F2 = {20i+20j}N
50N

What is WRONG with this 3-D vector?
All three angles are arbitrarily picked: Σcos^2 ≠ 1
Sketch the FBD of Particle A
Sum like this


Using the FBD of Point C, the sum of forces in the x-direction is _______
F2cos(50) - 20 = 0
Four forces act at point A, and point A is in equilibrium. Select the correct force vector P.
None of the above! P = {-20i-10j-10k} lb


What is the moment of the 12N force about point A (M_a)?
36 N * m

The moment of force F about point O is defined as
M_0 =
r X F

A force can be applied in 4 different configurations. Which cases will result in the maximum and minimum torque values put on the wrench.
(Q,S)

What is the net moment of the two forces about point P?
20N.m
If r = {5j} m and F = {10k} N, the moment r X F = {_________} Nm
50i
When determining the moment of a force about a specified axis, the axis must be along ______
any line in 3D space
The vector operation (P x Q) dot R equals what
R dot (PxQ)


The force F is acting along DC. Using the triple scalar product to determine the moment of F about the bar BA, you could use any of the following position vectors except _____
r_DB

For finding the moment of the force F about the x-axis, the position vector in the triple scalar product should be _____
r_AB

If r = {1i+2j} m and F = {10i + 20j + 30k} N, then the moment of F about the y-axis is _______ Nm
-30
In statics, a couple is defined as ______ separated by a perpendicular distance.
two forces of equal magnitude acting in opposite directions
The moment of a couple is called a _________ vector.
Free

F_1 and F_2 form a couple. The moment of the couple is given by what
r_2 x F_1
If three couples act on a body, the overall result is that
the net force equals 0 but the net moment is not necessarily equal to 0

A couple is applied to the beam as shown. Its moment equals _________ Nm.
60

You can determine the couple moment as M = r x F. If -F = {-20k} lb, then r is
r_BA
A general system of forces and couple moments acting on a rigid body can be reduced to a __________
single force and a single moment
The original force and couple system and an equivalent force-couple system have the same _________ effect on a body.
external

The forces on the pole can be reduced to a single force and a single moment at ______
any of these points
Consider two couples acting on a body. The simplest possible equivalent system at any arbitrary point on the body will have
one couple moment
For this force system, the equivalent system at P is

Consider three couples acting on a body. Equivalent systems will be __________ at different points on the body.
the same even when located

The resultant force (Fr) due to a distributed load is equivalent to the _______ under the distributed loading curve, w=w(x)
Area
The line of action of the distributed load's equivalent force
passes through the ______ of the distributed load.
centroid

What is the location of Fr (the distance d)
5m

If F_1 = 1N, x1 = 1m, F_2 = 2N and x_2 = 2m, what is the location of Fr (the distance x)
1.67m

Fr = _____
600N

x = ______
4m
If a support prevents translation of a body, then the support exerts a _________ on the body.
force
Internal forces are ________ shown on the free body diagram of a whole body.
never

The beam and the cable (with a frictionless pulley at point D) support an 80 kg load at point C. In a FBD of only the beam, there are how many unknowns?
Three forces

If the directions of the force and the couple moments are both reversed, what will happen to the beam?
The beam will lift from point A
Internal forces are not shown on a free-body diagram because the internal forces are _________
equal and opposite, and they do not affect the calculations

How many unknown support reactions are there in this problem?
Three forces and one couple moment
The three scalar equations, ΣFX = Σ FY = Σ MO = 0, are ____ equations of equilibrium in two dimensions.
the only correct

A rigid body is subjected to forces as shown. This body can be considered a _______ member.
two-force

For this beam, how many support reactions are there and is the problem statically determinate?
(3, No)

The beam AB is loaded and supported as shown:
How many support reactions are there on the beam?
Is this problem statically determinate?
Is the structure stable?
(4, No, Yes)

Which equation of equilibrium allows you to determine FB right away?
Σ MA = 0

A beam is supported by a pin joint and a roller. How many
support reactions are there and is the structure stable for
all types of loadings?
(3, No)
If a support prevents rotation of a body about an axis, then the support exerts a _________ on the body about that axis.
couple moment
When doing a 3-D problem analysis, you have scalar equations of equilibrium.
6

A plate is supported by a ball-and-socket joint at A, a roller joint at B, and a cable at C.
How many unknown support reactions are there in this problem?
Five forces

What will be the easiest way to determine the force reaction BZ?
Scalar equation Σ MY = 0
One of the assumptions used when analyzing a simple truss is that the members are joined together by _______.
Smooth Pins
When using the method of joints, typically _________ equations of equilibrium are applied at every joint.
two

Truss AB C is changed by decreasing its height from H to 0.9 H. Width W and load P are kept the same. Which one of the following statements is true for the revised truss as compared to the original truss?
The forces in all its members have increased

For this truss, determine the number of zero-force members.
3

Using this FBD, you find that FBC = -500N. Member BC must be in _____.
compression
When supporting the same magnitude of force, truss members in compression are generally made _____ as compared to members in tension.
thicker
In the method of sections, generally a 'cut' passes through no more than _______ members in which the forces are unknown.
3
If a simple truss member carries a tensile force of T along its length, then the internal force in the member is ________.
Tensile with magnitude of T

Can you determine the force in member ED by making the cut at section a-a? Explain answer
Yes, using Σ MB = 0

if you know FED, how will you determine FEB?
By taking section b-b, and using Σ Fx = 0 and Σ Fy = 0

As shown, a cut is made through members GH, BG, and BC to determine the forces in them.
Which section will you choose for analysis and why?
Right, fewer calculations