quiz 10 atomic absorption

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/55

encourage image

There's no tags or description

Looks like no tags are added yet.

56 Terms

1
New cards

what is atomic absorption methodology?

used to determined the concentration of elements in their solution by vaporizing them and measuring their absorption of characteristic wavelengths

2
New cards

what is used to convert sample to atomic vapor?

high energy source

3
New cards

when sample is converted to a atomic vapor, what state are the electron in?

mostly ground state but some excited state electron

4
New cards

what is being measured in atomic absorption?

wavelengths are produced of the element being measured

5
New cards

what is the relationship between amount of light emitted and concentration of sample?

inversely proportional

6
New cards

______ concentration of sample the ______ intensity of light that is emitted

greater; lesser

7
New cards

how is the change of intensity of light measured by?

photodetector

8
New cards

What is the actual measurement taken that reflects the concentration of the analyte that you are trying to quantify (are you measuring absorption or transmittance)?


The light is inversely proportional to the concentration. (you are measuring transmittance)

9
New cards

what type of cation does the sample need to be to atomized easily?

divalent or trivalent

10
New cards

what are divalent cations?

any cation in the 2+ state

Ca2+, Cu2+, Mg2+

11
New cards

what are trivalent cations

any cation in the 3+ state

Fe3+, Au3+

12
New cards

what happens when molecules are burned?

complexes are disassociated, chemical bonds are broken and atoms are released in an unexcited ground state

13
New cards

what happens when light passes through ground-state atoms?

atoms absorb light at characteristic wavelengths and become excited (transmission)

14
New cards

what is a ground-state atom?

atoms whose electrons are at their lowest energy levels

15
New cards

what happens when an atom absorbs light?

electron gains energy and moves to a higher energy level

16
New cards

what is an excited-state atoms?

an atom with an electron raised to a higher energy level

17
New cards

what type of wavelength do atoms absorb?

characteristic wavelength specific to the element

18
New cards

how is light absorbed related to analyte concentration?

directly proportional

more atoms = more light absorbed

19
New cards

what happen to absorbance as analyte concentration increases?

absorbance increases

20
New cards

how is light emitted related to atom concentration?

inversely proportional

21
New cards

what does atomic absorption spectroscopy measured?

the amount of characteristic light absorbed by ground state atoms

22
New cards

if fewer atoms are present what happen to absorbance?

absorbance decreases because fewer atoms absorb light

23
New cards

What is the state of the atoms (ground or excited) produced after being vaporized by the heat source?


the ground state

24
New cards

What is the state of the atoms (ground or excited) when they absorb light?

a transition between the ground and excited states

25
New cards

What is the state of the atoms (ground or excited) when light is being emitted?

an excited state

26
New cards

what are the components of atomic absorption?

light sources

nebulizer

energy sources (atomizer)

monochromator

detector

read-out device

27
New cards

what are some examples of light sources

hollow cathode lamp

laser

28
New cards

what is the most common light source for atomic absorption?

hollow cathode lamp

29
New cards

what are some examples of energy sources (atomizer)

graphite furnance or burner

flame

30
New cards

what happens in the nebulizer?

where samples are introduced into the atomizer

direct injection point

creating aerosol of speciment

31
New cards

what happens in the atomizer?

converting aerosolized sample into a vapor (gas)

32
New cards

what is the most common atomizer (energy source)?

graphite furnace or burner

very consistent high energy source

33
New cards

what is a monchromator

isolates the wavelength of the light that is needed to be measured

exit slit = bandwidth, ideal wavelength of light is going to pass out

bandwidth side can be adjusted.

34
New cards

what does a wider bandwidth mean?

increases the intenisty of light that is pass through but decrease resolution

35
New cards

what does a smaller bandwidth mean?

resolution will increase but decrease the intensity

36
New cards

what first happens to sample in atomizer?

aspirated into the heat source and then converted to a gaseous state

37
New cards

the ______ temperature produces atoms in ______ state

high; ground

38
New cards

what is used to produce a high temperature (2700C)

graphite furnace or burner

39
New cards

what are advantages of graphite furnace than a flame?

uniform heating

increased sensitivity

lower detection limit

40
New cards

what is needed for each analyte?

serparate hollow cathode

41
New cards

what does each cathode lamp incude?

filament containing the same metal being tested (The reason a separate hollow cathode lamp is needed for each analyte)

rare gas, argon helium or neon

42
New cards

why is a rare gas needed in each cathode lamp?

electrical discharged produced by the power source ionizes the rare gas atoms, causing collision of the gas and metal atoms

the element of interest is separated and placed in its unexcited ground state

43
New cards

what causes collision of gas and metal atoms?

electrical discharged produced by the power sources ionzes the rare gas atoms

44
New cards

what happens when metal is present?

some of the light will absorbed

45
New cards

what is being measured from atomizer

intensity of light emitted

46
New cards

the _____ concentrated the metal in sample the _____ light will be absorbed

more; more

47
New cards

________ _________ curves are compared to the sample result

standard calibration

48
New cards

what is used to analyze many metals?

atomic absorption spectrophotometry (AAS)

49
New cards

what heavy metals are present in body fluids?

iron (Fe), copper (Cu), aluminum (Al), lead (Pb), arsenic (Ar), calcium (Ca), zinc (Zn), and cadmium (Cd)

50
New cards

what else can heavy metal analysis used for

fertilizers and industrial waste

51
New cards

what are advantages of AAS?

quantitative

AAS is a sensitive technique that determine the concentration of most elements at the part-per-million (ppm) level

52
New cards

what are disadvantages of AAS?

furnace may not be able to separate all elements in the sample, necessary for absorption to occur

matrix interference due to the composition of the standard varying greatly from the test sample

If instruments use flame as a heat source it is an inconsistent heat source due to flickering.

53
New cards

How is resolution and light intensity may be affected by adjusting the bandwidth to be larger?

greater intensity of light and lower resolution

54
New cards

How is resolution and light intensity may be affected by adjusting the bandwidth to be smaller?


Less intensity of light but increase the resolution

55
New cards

What is the most common energy (atomizer) source used in atomic absorption methods?


a graphite furnace or burner.

56
New cards

What are the advantages of using a graphite furnace vs. a flame as the atomizer component in atomic absorption methods?

the furnace has uniform heating, increased sensitivity, and a lower detection limit