1/59
Looks like no tags are added yet.
What is a Letter of Agreement and how is it used in Air Traffic Control?
Document transferring separation responsibility from the ARTC to a smaller facility
What is the difference between "transfer of communication" and "transfer of control"?
transfer of communication is radio transfer and transfer of control shifts responsibility for separation to the new controller and occurs at the sector boundary
Explain why there is no ADIZ (air defense identification zone) along the border of Canada and the United States
The air defense of North America is maintained jointly by Canada and American military forces
A handoff is:
transfer of aircraft control AND transfer of communication
What does the flight data controller do in the ARTCC?
responsible for assisting/coordinating between other controllers and passing information
T or F: When taxiing to the active runway in VFR conditions, aircraft must keep clear of the critical areas
False
Ground controller duties include:
preventing runway incursions, protecting critical areas, and safety of all aircraft taxiing on taxiways and inactive runways (all of the above)
Which of the following uses proper phraseology?
"November one two three Alpha Uniform, Montgomery Tower, taxi to runway two eight" possibly? got this wrong
T or F: A left-handed VFR traffic pattern is considered standard at uncontrolled airports
true
A new version of ATIS will be released for all of the following EXCEPT:
every 30 minutes
"To separate both civilian and military aircraft, the FAA has divided the nation's assigned airspace into twenty-two air route traffic control centers. The primary function is to separate IFR and participating VFR aircraft operating within controlled airspace
ARTCC
The objective is to make sure that ATC units coordinate consistently and uniformly, assign roles during the transition from aircraft communication and control, establish separation standards, handoff protocols, altitude assignments, and routing; and reduce procedural misunderstandings and communication errors
letter of agreement (LOA)
the FAA authorization for the military to perform exercises outside the confines of a restricted area or an MOA. The DOD must submit a request to the FAA for a block of airspace and the military assumes responsibility for maintaining safe operations. ATC is notified of the reserved airspace and will re-route IFR traffic, but VFR traffic must maintain their own separation. The military pilots will also be responsible for doing the same
MARSA (military assumes responsibility for separation of aircraft)
6 of these, Atlantic coastal, gulf of Mexico, southern border domestic, Alaskan distant early warning identification zone (DEWIZ), Hawaiian coastal, pacific coastal
ADIZ (air defense identification zone)
ICAO members have agreed to assign responsibilities in international airspace to specific countries. The FAA has Gulf of Mexico and half of both Atlantic/Pacific oceanic airspace. Must follow ICAO approved procedures and agree with assigned international ATC rules
Flight information regions (FIRs)
offers private contractors a subsidy to operate them; while private contractors operate these, they still have to meet the same qualifications and follow the same rules as FAA operated towers and pilots are required to follow the instructions of these controllers. Some airports don't qualify for an FAA tower, so they would contract out to a private air traffic control company
federal contract tower program
aircraft that are in direct communication with ATC and are receiving ATC services (e.g. separation, traffic advisories, routing.). Typically IFR or VFR under flight following, under ATC control and adhering to instructions
participating aircraft
an aircraft flying through an MOA that has coordinated with ATC to ensure separation from military activity
example of participating aircraft
aircraft that are not in communication with ATC and are not receiving ATC services, usually VFR and operate autonomously. ATC is not providing separation or monitoring
non-participating aircraft
a small VFR aircraft flying below a Class C airspace shelf without a transponder and not in contract with ATC
example of non-participating aircraft
air traffic volume, type of passengers, amount of airline passengers coming in and out of the airport, how many IFR flights that take place in the airport, volume of student training, and environmental considerations such as difficult terrain or a higher likelihood for adverse weather
some factors to determine if facilities are required at an airfield
when an aircraft crosses a sector boundary or the boundary between two separate ATC facilities, the responsibility for separating that aircraft passes on to the controller in the new sector. The process of transferring control an communication of an aircraft from one controller to the next
handoff
process where responsibility for an aircraft's navigation and separation from other aircraft is passed from one air traffic controller (ATC) to another. This typically happens when an aircraft crosses a boundary between two ATC sectors or when a new controller takes over responsibility. The process involves coordination between the two controllers to ensure a smooth and safe handoff
transfer of control (TOC)
the pilot is directed to contact the receiving controller on a different radio frequency prior to crossing the sector boundary; this must occur before the aircraft crosses the sector boundary to ensure that the receiving controller will be in radio contact with the pilot before the aircraft enters the sector. This permits the receiving controller to issue any new control instructions to the pilot before the aircraft crosses the sector boundary
transfer of communication
departure or arrival routes that increase system efficiency by organizing traffic flows
preferential routes
a preferential route primarily used for aircraft arriving at the terminal area
preferred arrival route (PAR)
a preferential route primarily used for aircraft departing a terminal area
preferred departure route (PDR)
Their role is support and coordination. They handle pre-flight data like flight planes and weather briefings, coordinate flight information with other ATC facilities and ground services, and relay clearances from controllers to pilots via radio or ground communications systems
flight data controller
their role is separation and sequencing of aircraft using radar systems. They use radar displays to track and guide aircraft in real time, issue clearances and instructions directly to pilots via radio, and monitor aircraft for potential conflicts and resolve them properly
radar controllers
job is to assist the radar controller when separating aircraft that do not appear on the radar display; duties include updating the flight progress strips to accurately reflect every aircrafts position, altitude, and route of flight, then uses this information to separate aircraft that are either too low or too far away to be displayed on the radar. They also need to be prepared to assume control of separation should the radar fail
radar associate/nonradar controllers
control at busy facilities that have been delegated a large amount of airspace from the ARTCC. At larger airports, these people are usually positioned in a separate building nearby the tower. These TRACONs (terminal radar approach control) can be staffed by up to 40 people at a time, and the airspace is divided into smaller, more manageable sectors
approach/departure control
in the ATCT, responsible for aircraft and vehicle movement on airport movement areas (i.e. ramps, taxiways, runways)
ground control(ler)
responsible for separating traffic moving within the airspace of the airport and landing traffic
(local controller)
an internal document issued by an FAA facility (line an Air Route Traffic Control Center or Tower) to provide local procedures, responsibilities, and guidance for air traffic personnel. It ensures consistency in how operations are handled within that facility and can include things like Sector responsibilities, coordination procedures, equipment usage, local traffic patterns, or special use airspace
facility directive
VFR towers, non-radar approach towers, and radar-approach towers
three categories of towers
these towers do not have significant responsibility for IFR separation. The ARTCC usually keeps that responsibility or delegates it to another tower. May have limited duties like initially separating IFR departures or separating IFR arrivals from departures
VFR towers
these towers do have IFR separation responsibility designated by the ARTCC. Controllers usually work from the tower cab and separate IFR traffic using non-radar procedures
non-radar approach towers
these towers have delegated IFR separation authority, but use radar to manage IFR traffic
radar-approach towers
an air traffic control support position responsible for managing and distributing flight plan information, coordinating aircraft data between sectors and facilities, preparing flight progress strips, monitoring weather and notices, and assisting air traffic controllers by ensuring they have accurate, up-to-date information to maintain safe and efficient air traffic operations
flight data controller (FDC)
responsible for obtaining and relaying departure clearances to pilots, including aircraft identification, clearance limit, departure procedure, route of flight, altitude departure, frequency, transponder code, amend clearances as needed in regards to altitude or routes, ensure compliance with departure restrictions, and ensure the route is accurate and that there are no preferential routes
clearance delivery controller duties
issues clearances to departing and arriving traffic
taxi clearances
manage movement of ground vehicles and aircraft past the ramp area
movement area management
give direction so that aircraft remain clear of the runway while others are taking off or landing
runway incursion prevention
duties include the safe sequencing of arrivals and departures at the airport. Runway sequencing helps to ensure proper separation, and instructions are provided to aircraft at/arriving to the airport. However, is it NOT the controller's responsibility to separate VFR traffic, but they may offer assistance
local controller duties
a standardized path that aircraft follow around an airport when flying under VFR to ensure safe and organized arrivals and departures; typically includes five legs: upwind, crosswind, downwind, base, and final
VFR traffic pattern
This type of separation can be pilot provided or ATC provided. When pilot provided, the pilot sees and avoids the other aircraft. When ATC provided, the controller sees both aircraft and ensures a safe distance. Common uses are visual approaches, parallel runway operations, and formation flights. This is not allowed in poor visibility (IMC or clouds) and requires constant visual contact
visual separation
designated zones around the ILS antennas that must be clear of vehicles and aircraft to ensure the accuracy of the ILS signal. The instrument hold short line where aircraft must stop before entering these areas when instructed by ATC
airfield critical areas, specifically ILS critical areas
all aircraft produce this, which comes off of the aircrafts' wingtips due to pressure differential on the wings. It can upset or even invert a smaller aircraft that encounters it, either in the air or on the ground
wake turbulence
ground taxiing with gear, hover taxiing within 50 feet of the ground and airspeed below 20 kts, air taxiing below 100 feet and above 20 kts, and autorotation envelope if able (about 600 feet or 40 kts)
helo taxiing
altitude relative to sea level
MSL
altitude relative to the ground
AGL
closer to sea level there is not much of a difference, but at higher altitudes, you could be at 11,000 ft MSL and only be a couple of hundred feet off the gorund
MSL vs AGL
time based off of 0 degree lime of longitude in Greenwich, England, that is a 24 hour clock
coordinated universal time (UTC)
local is -5 or -6
zulu
written is true north, over radio is magnetic north, reported in direction wind blowing FROM and knots
how winds are reported
magnetic heading, drop leading/trailing zeros, rounded to nearest 10 degrees, and left or right
how runways are numbered
who you're calling + who you are + where you are, then what you want, then what you're doing
format of radio call
you may descend early, but not below the specified altitude before the fix
cross at or above
you must be at or below the given altitude at the fix
cross at or below
pilot's choice as long as you are not below or above the assigned altitude at the fix
pilot's discretion