1/46
Vocabulary practice flashcards covering Slow Resistance Training (SRT) principles, physiology, reformer mechanics, programming structures, and exercise science.
Slow Resistance Training (SRT)
A low-impact, high-intensity fitness modality designed for the Modern Pilates Reformer that integrates slow-twitch muscle science, reformer versatility, and resistance supersets built around tempo, tension, and time.
T3 Formula
The foundational tripartite training framework of SRT consisting of Tempo (slow, controlled pace eliminating momentum), Tension (constant muscular resistance with no resting lockout), and Time (sustained duration under load to achieve sequential fiber recruitment).
Three Modern Reformer Spring Configurations
The three distinct mechanical ways resistance is set on the reformer:
1. Light Springs on the Front (pulling with the support of the springs),
2. Light Springs on the Back (pulling against the tension of the springs), and
3. Heavy Springs on the Front (pushing against the tension of the springs).
Reformer Spring Tension Coding
The standardized spring resistance values on the Modern Pilates Reformer: a White Spring signifies light tension, whereas a Black Spring signifies heavy tension.


Modern Pilates Reformer Anatomy
The core physical components of the SRT training machine, comprising the front platform, front handlebars, carriage, carriage strap, long cables, floor strap, back handlebars, back platform, and short handles.
Continuous Effort
Maintaining unbroken tension on the target muscle without pausing at movement endpoints—analogized to holding a flame against a fireplace log for 2 minutes straight to initiate a self-sustaining fire.
Minimum Duration Thresholds in SRT
The minimum time under continuous tension required to recruit the full spectrum of muscle fibers: at least 1 minute for Core & Abs, Obliques, and Upper Body; and at least 2 minutes for Lower Body.
Breathing in SRT
Continuous, deep, and steady respiration maintained without interruption from start to finish, detached from movement pacing to provide an uninterrupted oxygen supply to endurance muscle fibers.
Metabolic Stress (The Burn)
The acidic sensation produced during sustained muscle contraction under load caused by the accumulation of hydrogen ions and lactate, which lowers intramuscular pH and alerts local sensory nerves.
The Shake
Involuntary muscular trembling that occurs when the nervous system coordinates steady force, driven by novel motor demands, reduced leverage and cross-bridge bindings at extreme lengths, or desynchronized firing from neuromuscular fatigue.
Actin and Myosin
The two primary contractile protein filaments inside skeletal muscle fibers; myosin heads physically attach to and pull along actin filaments to produce force.
Cross-Bridge
The binding connection formed between a myosin head and an actin filament that allows muscle fibers to generate mechanical tension.
Slow-Twitch Muscle Fibers (Type I)
Endurance-oriented, fatigue-resistant motor units that generate lower force outputs and depend primarily on oxygen and aerobic metabolism during prolonged time-under-tension training.
Fast-Twitch Muscle Fibers (Type II / Type 2x)
High-force, explosive muscle fibers designed for powerful, short-duration output that fatigue rapidly, recruited in SRT after lower-threshold fibers are depleted.

Muscle Fiber Sequential Recruitment
The orderly progression by which the nervous system activates motor units under increasing continuous strain, transitioning systematically from slow-twitch (Type 1) to intermediate-twitch (Type 2a) and finally to fast-twitch (Type 2x).
Goldilocks Zone of Fiber Recruitment
The precise intensity range in SRT that is slow enough for joint safety and controlled form, yet intense enough to cycle sequentially through all three motor unit types before total muscular fatigue.
The Fantastic Five
The five variables utilized in SRT to scale exercise difficulty and adapt intensity: 1. Resistance (physical spring tension or body position), 2. Tempo, 3. Range-of-Motion, 4. Angle, and 5. Duration.
Modifications vs. Progressions
Modifications adjust an exercise to accommodate individual ability levels, injuries, or special considerations; progressions alter mechanical parameters to increase an exercise's difficulty.
Effective-Hard vs. Technique-Hard
Effective-hard describes an exercise whose execution begins cleanly and breaks down toward the end due to targeted muscle overload; technique-hard (ineffective-hard) begins messy due to coordination or balance barriers and improves as the movement pattern is learned.
Strength Curve
The biological pattern demonstrating how muscle force capacity varies across different joint angles and muscle lengths (shortened, mid-range, lengthened), which reformer spring resistance dynamically mirrors.
Strength Curve Advantage of Reformer Springs
The mechanical benefit where springs offer the least resistance or greatest assistance at a muscle's weakest biomechanical leverage points, and increasing resistance where leverage is strongest, ensuring joints are protected and muscles stay continuously loaded.
Time Under Tension (TUT)
The total duration a muscle is maintained under mechanical load during an exercise bout, serving as the core measurement metric in SRT instead of rep counts.
Isometric Contraction
A static muscular contraction where the muscle produces force without altering its length or changing the joint angle, such as holding a plank.
Concentric Contraction
The lifting or squeezing phase of an exercise during which the contracting muscle shortens while producing force, such as pulling the carriage inward during a Seated Crunch.
Eccentric Contraction
The lowering or resisting phase of an exercise during which the muscle lengthens under continuous load, such as controlling the carriage back out from a crunch.
Hypertrophy
The physiological enlargement of individual muscle fiber diameters in response to targeted resistance training stress, improving muscular quality and density.
Muscular Fatigue vs. Muscular Failure
Fatigue is the state where muscles tire but continue functioning; failure is the endpoint where muscles can no longer execute movement with correct form. SRT targets operating seconds shy of true failure.
Delayed Onset Muscle Soreness (DOMS)
Muscular soreness manifesting 24–72 hours following training due to micro-tears in muscle fibers, serving as a standard sign of physical adaptation rather than a workout's primary goal.
Progressive Overload
The structured, gradual escalation of mechanical resistance, set time, or workout intensity to compel the neuromuscular system to continually adapt and strengthen.
The Myth of Muscle Toning
The misconception that muscles can be lengthened or 'toned'; scientifically, muscles only hypertrophy or build strength, and a toned appearance results from muscle hypertrophy coupled with lower body fat.
Studio Landmarks
Consistent architectural reference points in the room (e.g., 'face the windows', 'turn towards the lobby') used instead of relative directional words like 'left' or 'right' to cue carriage alignment clearly.
Health-Related Fitness Benefits of SRT
The five clinical health parameters improved through SRT: Muscular Strength, Muscular Endurance, Cardiovascular Endurance, Flexibility, and Body Composition.
Skill-Related Fitness Benefits of SRT
The six neuromuscular performance qualities developed in SRT: Agility, Balance, Power, Speed, Coordination, and Reaction Time.
SRT Class Block Architecture
The six structured blocks forming an SRT routine: 1. Core + Abs (4–5 minutes, 3–4 exercises), 2. Left Leg + Glutes (10–12 minutes, 4–5 exercises), 3. Right Leg + Glutes (10–12 minutes, 4–5 exercises), 4. Left Oblique (4–5 minutes, 3–4 exercises), 5. Right Oblique (4–5 minutes, 3–4 exercises), 6. Arms (5–6 minutes, 4–5 exercises), plus an optional Finisher (1–3 minutes, 1–2 exercises).
Warm-Up Physiology in SRT
The rationale excluding pre-class static stretching: passive stretching does not induce muscle contraction, whereas slow-tempo, supported muscular contraction is required to draw blood into tissue and stimulate metabolic warming.
Catabolism and Anabolism in SRT
The dynamic recovery cycle where training induces catabolism (cellular breakdown of muscle fibers), followed post-workout by anabolism (energy-costly tissue repair and rebuilding that consumes stored calories and builds lean mass).
Tailbone Biceps Curls Strength Curve Dynamics
An exercise demonstrating reformer spring physics: when the arms are extended at full length leverage is weakest and spring tension is lowest, and as elbows flex toward shoulders leverage increases along with increasing spring tension.
Unilateral Oblique Exhaustion Principle
The SRT programming rule dictating that one target oblique side must be trained through its full sequence of exercises to muscular fatigue before initiating work on the opposing oblique.
Time to focus on Core & Abs, Obliques, Upper body
at least 1 minute
Time to focus on lower body:
at least 2 minutes
Tempo
Pace: Go Slow, Move without momentum, Smooth & controlled speed. Concentrate on form & feeling, do not hold your breath or rush the movement.
Tension
Intensity: Choose a resistance where your muscles can fatigue in the planned duration. no more no less your range of motion has no “lockout” or “unload” at the top or bottom of the motion.
Time:
Duration: Take the proper amount of time to activate the sequential recruitment of muscle fibers. No more no less, move quickly from one exercise to the next. Build endurance and you can rest when the workout is done.
Tempo: Pace
Slow Twitch Muscle Fibers
TUT [ Time Under Tension]
Sequential Recruitment
Tension: Spring Resistance
1. Light Springs on the Front (pulling with the support of the springs),
2. Light Springs on the Back (pulling against the tension of the springs), and
3. Heavy Springs on the Front (pushing against the tension of the springs).
Time: Duration
Core & Abs, Obliques, Upper Body = at least 1 minute
Lower Body = at least 2 minutes
Fantastic Five
Resistance
Physical Spring Tension
Body Position
Tempo
Range of Motion
Angle
Duration