1/28
Looks like no tags are added yet.
The Difference between Stereo and Mono
Localization
Number 1 Rule
Trust your ears and take care of them
Dave’s Holy Trinity of Mixing
Set the Meters to the proper level (-16 to -10 dB for dialogue and -6dB for music) to prevent clipping
Make sure the control room playback is around -85db (to simulate theaters)
Understand the Fletcher-Munson Curve in a known listening environment (know that ears hear the most accurately and evenly at 85 dB while still being safe for prolonged listening)
What is a meter?
A Voltmeter. Meters are a device that measures voltage in decibels (db)
What is an Advantage of Midside Micing?
Records Perfect Mono without a second track, meaning you get full perfect mono compatibility
The Width of the sound can be altered in post production
Has both cardioid and figure 8 patterns
Can capture stereo sound on it’s own
Record and listen simultaneously
Reflection
When a pressure wave reaches a surface barrier, it is reflected back into the room. Reverb.
How do you capture good sound?
Minimize Reflection (reverb) by using materials that have a good absorption coefficient
What is Phase Cancelation?
Time delay (An audio person’s worst nightmare). When the sound is out of sync with itself
Types of Microphones
Dynamic and Condenser
What is the Difference between Dynamic Mics and Condenser Mics?
Condenser Mics need phantom power, 48 volts, to operate and are more sensitive to sound. Dynamic is more rugged and doesn’t do well with high frequencies
Micing types
Figure 8 (180 Degrees)
Omni (360 Degrees)
Cardioid (90 Degrees)
Supercardioid (90 Degrees)
What is the Proximity Effect?
Hearing more lower frequencies the closer you are to the source
What’s the first thing you do when setting up the mix Pre 6?
Format the card (steps- menu, sd card, edit, format)
Why do we want headroom?
To avoid clipping or distortion
What is the pickup range of cardioid mics?
90 degrees
What is the point of co-incident recording techniques?
To avoid time delay/phase cancellation
What are the types of co-incident recording?
X-Y configuration, ORTF configuration, and M-S or Mid-side
XY Configuration
Two cardioid mics overlapping on 90 degree axes to create a right angle, one cardioid come in through the left channel and the other comes in through the right channel
ORTF Configuration
ORTF are two cardioids creating a 110 degree angle
Mid-Side Configuration
Two mics matrixed together
How does mid-side recording work?
Mic 1 (cardioid) is used to record the main source and mic 2 (figure-8) is used to record the sides of the source, when matrixed together they produce good stereo sounds, on side of the figure-8 must be reversed polarity in order for this to work
Why do we need an alignment tone?
A tone that is used as a reference when calibrating playback (set to 20dbfs)
Can you work in ProTools directly off a hard drive?
No, has to be in documents. Always copy files when loading into ProTools, don’t add.
What are the specs needed for exporting in ProTools?
WAV file, interleaved, 24 bit, 48kHz
What are frequency range and dynamic range?
Frequency range is pitch and dynamic range is volume
What’s the difference between mic input and line input?
Mic input inserts and amplifier; mic level needs to be amplified while line level doesn’t
If you see tone on one track and you need to get it to two tracks, what do you do?
Pan to center and make it dual mono so it shows up on both tracks
What polar pattern has the best frequency response on axis?
90 degrees or cardioid pattern
Transiants
Quick, complex waveforms