1/92
Looks like no tags are added yet.
What is nucleophilic substitution?
A nucleophile donates an electron pair to an electrophilic carbon and replaces its leaving group. The carbon bearing the leaving group is the α-carbon.
What is β-elimination?
A base removes a hydrogen from a β-carbon while the leaving group departs from the adjacent α-carbon. The Cβ–H and Cα–leaving-group σ bonds are replaced by a Cα=Cβ π bond.
How do you identify α-carbons, β-carbons, and β-hydrogens?
The α-carbon bears the leaving group. Every carbon directly bonded to it is a β-carbon, and every hydrogen attached to one of those carbons is a β-hydrogen.
How do you classify an alkyl halide as methyl, primary, secondary, or tertiary?
Count the carbon atoms directly attached to the carbon bearing the halogen. Zero is methyl, one is primary, two is secondary, and three is tertiary.
What do the numbers in SN1, SN2, E1, and E2 indicate?
They indicate how many reacting species participate in the rate-determining step. SN1 and E1 are unimolecular, while SN2 and E2 are bimolecular.
What is the SN2 mechanism, including curved arrows?
In one concerted step, draw an arrow from the nucleophile’s lone pair to the α-carbon and another from the C–leaving-group bond to the leaving group. The nucleophile attacks from the back as the leaving group departs.
Why does SN2 require backside attack?
The nucleophile approaches opposite the leaving group, where it can overlap with the antibonding orbital of the C–leaving-group bond. The approach also avoids direct crowding with the leaving group.
What does the SN2 transition state look like?
The nucleophile and leaving group lie on opposite sides of the α-carbon with partial bonds to it. The other three groups lie approximately in one plane, about 120° apart. The brackets and double dagger ‡ indicate a transition state.
What is Walden inversion, and how do you draw it?
The three groups attached to the α-carbon flip orientation as the nucleophile enters from the opposite side. If you keep the same two in-plane bonds in your drawing, replace a wedge leaving group with a dash nucleophile, or a dash leaving group with a wedge nucleophile.
Does SN2 inversion always change R to S or S to R?
Recalculate CIP priorities after substitution. The geometry always inverts at the reacting center, while the R/S label can stay the same if the priority order changes.
Why is SN2 stereospecific?
The starting configuration determines the product configuration because attack occurs from the back. Opposite configurations at the reacting center undergo opposite inversions.
What is the SN2 rate law?
Rate = k[substrate][nucleophile]. Doubling either concentration doubles the rate. Doubling both quadruples it. Use molarity, so doubling the amount only doubles the concentration if the volume is held constant.
What does a simple SN2 energy diagram show?
One peak for the concerted transition state and no intermediate valley. The energy difference from the reactants to the peak is the activation barrier.
How does α-carbon substitution affect the SN2 rate?
Methyl > primary > secondary, with ordinary tertiary substrates effectively blocked. Increasing substitution crowds the backside approach.
How does β-branching affect SN2?
Branches on the carbon next to the α-carbon can crowd the backside approach. Neopentyl halides are primary but unusually slow because the adjacent carbon is heavily branched.
What are the products of representative SN2 reactions with CN⁻, HS⁻, RS⁻, and N₃⁻?
These reagents replace the leaving group to give a nitrile R–C≡N, a thiol R–SH, a sulfide R–SR′, and an alkyl azide R–N₃, respectively. Cyanide adds its carbon to the product skeleton.
Can a neutral nucleophile participate in SN2?
Yes. Amines, phosphines, and sulfides can be strong neutral nucleophiles. Check the reacting atom’s valence and formal charge after attack. An amine bearing N–H can lose a proton after attack, while a tertiary phosphine gives a phosphonium ion.
How can an SN2 mechanism have more than one step overall?
The substitution itself is concerted. A proton transfer can occur before it to activate a leaving group, after it to neutralize a protonated product, or both. Each separate elementary step adds a transition state to the energy diagram.
What is the SN1 mechanism, including curved arrows?
First, draw the C–leaving-group bond electrons onto the leaving group to form a carbocation. Next, draw the nucleophile’s lone pair to the carbocation. If water or an alcohol attacks, a base typically removes a proton from the resulting oxonium ion.
What is the SN1 rate law?
Rate = k[substrate]. Leaving-group departure is the slow ionization step. Doubling substrate concentration doubles the rate, while changing nucleophile concentration leaves the rate unchanged under the usual SN1 conditions.
What does an SN1 energy diagram look like?
Each elementary step has a peak, and each intermediate is represented by a valley. The simplest mechanism has two peaks separated by the carbocation. Deprotonation, substrate activation, or rearrangement can add peaks. Identify the slow step by the activation energy from its preceding minimum.
What is the geometry of an SN1 carbocation?
The positively charged carbon is sp²-hybridized and trigonal planar, with an empty p orbital. A nucleophile can approach either face.
What stereochemistry can SN1 give?
Attack on either face can give inversion and retention at the reacting center if it becomes stereogenic. With one stereocenter and equal attack on both faces, the result is a racemic mixture. Ion pairing can partly shield the leaving-group side and give an excess of inversion.
When do you show wedge and dash products for SN1?
Show both configurations when attack creates a stereocenter. If the reacting carbon ends up bonded to two identical groups, it has no stereocenter. If other stereocenters remain, preserve them and check whether the two products are diastereomers.
What is the usual reactivity order for ordinary alkyl halides in SN1 and E1?
Tertiary > secondary. Ordinary primary and methyl substrates rarely ionize under these conditions. Alkyl groups stabilize carbocations by hyperconjugation and electron donation, and allylic or benzylic resonance can make some primary substrates viable.
Why can a weak nucleophile work in SN1?
The leaving group departs before attack, and the carbocation is strongly electrophilic. Water and alcohols can attack it readily.
What is solvolysis?
A reaction in which the solvent acts as a reagent. In SN1 solvolysis, water typically gives an alcohol and an alcohol solvent typically gives an ether after deprotonation.
Why can silver nitrate promote SN1 of an alkyl halide?
Ag⁺ helps remove halide by forming a silver halide precipitate, promoting ionization. Identify the nucleophile separately, often the solvent.
When should you check for carbocation rearrangements?
After carbocation formation in SN1 or E1, look for an adjacent 1,2-hydride or 1,2-alkyl shift that would form a more stable carbocation. Check before drawing nucleophilic attack or elimination.
How do you draw a 1,2-hydride shift?
Draw an arrow from the adjacent C–H bond to the carbocation center. Hydrogen migrates with the bonding electron pair, and the positive charge moves to the carbon that lost hydrogen.
How do you draw a 1,2-methyl shift?
Draw an arrow from the bond joining the adjacent carbon and its methyl group to the carbocation center. The methyl moves with the electron pair, and the carbon it left becomes the carbocation.
How does carbocation rearrangement affect the final product?
The nucleophile can attach at the new carbocation center in SN1. In E1, reidentify the carbocation carbon and its adjacent β-carbons before drawing the double bond. Unrearranged products can also form if the original carbocation reacts before shifting.
Why are allylic and benzylic substrates special?
Adjacent π systems stabilize carbocations by resonance, helping SN1 and E1 ionization. Accessible allylic and benzylic substrates can also undergo fast SN2 reactions.
How can an allylic SN1 reaction give two constitutional products?
Draw the allylic carbocation’s resonance contributors to locate both carbons that can bear positive charge. Nucleophilic attack at either distinct end can give a product, with the double bond in the corresponding position.
How do you distinguish allylic and benzylic halides from vinylic and aryl halides?
In allylic and benzylic halides, the halogen is attached to an sp³ carbon next to a double bond or aromatic ring. In vinylic and aryl halides, it is directly attached to an sp² carbon of the double bond or ring.
Why do ordinary vinylic and aryl halides resist SN1 and SN2?
Ionization would give an unstable vinyl or aryl cation. The sp² framework also makes the usual SN2 backside displacement unfavorable, and the C–halogen bond is relatively strong.
What is nucleophilicity, and how does it differ from basicity?
Nucleophilicity is a kinetic measure of how quickly a species attacks an electrophile. Basicity describes the equilibrium tendency to accept a proton and is compared using conjugate-acid pKa values.
How do charge, resonance, and steric bulk affect nucleophilicity?
For the same attacking atom and otherwise comparable structures, a negative charge usually increases nucleophilicity. Resonance delocalization and steric crowding generally reduce it. Ethoxide is more nucleophilic than acetate under comparable conditions because its charge is more localized.
How does electronegativity affect nucleophilicity across a row?
For comparable nucleophiles across the same periodic row, the less electronegative atom generally donates electron density more readily. Compare charge, resonance, and steric effects as well.
How do halide nucleophilicities rank in polar protic solvents?
I⁻ > Br⁻ > Cl⁻ > F⁻. Hydrogen bonding solvates small, high-charge-density fluoride most strongly. Larger, more polarizable iodide is less tightly solvated and is more available to attack.
How do halide nucleophilicities usually rank in polar aprotic solvents?
The course trend is F⁻ > Cl⁻ > Br⁻ > I⁻. Without strong hydrogen-bond donation to the anions, their relative nucleophilicity more closely follows basicity.
What is a polar protic solvent, and why does it favor SN1 and E1?
A polar protic solvent has a hydrogen-bond-donating group, typically O–H or N–H. Water and alcohols stabilize the developing carbocation and departing anion during ionization. Hydrogen bonding to anionic nucleophiles also slows SN2.
What is a polar aprotic solvent, and why does it favor SN2?
It is polar and lacks an effective hydrogen-bond donor. Examples include acetone, DMSO, DMF, acetonitrile, and HMPA. These solvents solvate countercations while leaving anionic nucleophiles relatively available for attack.
What makes a good leaving group?
It can take the bonding electron pair and exist as a relatively stable species. Weak bases are usually good leaving groups, and a low conjugate-acid pKa is a useful indicator for anionic groups.
How do common leaving groups compare?
Sulfonates such as triflate, tosylate, and mesylate are excellent leaving groups. Among common halides, I⁻ > Br⁻ > Cl⁻, with F⁻ generally poor. OH⁻ and RO⁻ are poor leaving groups under ordinary conditions.
How does protonation activate an alcohol for substitution or elimination?
The alcohol oxygen accepts H⁺, turning R–OH into R–OH₂⁺. H₂O is the leaving group. Tertiary and many secondary alcohols can then ionize, while methyl or primary alcohols can undergo concerted displacement when a suitable nucleophile is present.
How can you activate an alcohol without first turning OH into water?
Treat it with tosyl chloride, TsCl, and pyridine to make an alkyl tosylate, R–OTs. The reaction occurs at oxygen and preserves configuration at the carbon bearing it. A subsequent SN2 step inverts that carbon, and a subsequent E2 step can form an alkene.
What are the four arrow-pushing patterns used in substitution mechanisms?
Nucleophilic attack, loss of a leaving group, proton transfer, and carbocation rearrangement. SN2 combines attack and leaving-group loss in one step. SN1 separates them and can include rearrangement between them.
What is the E2 mechanism, including curved arrows?
Draw three arrows in one step. The base’s lone pair goes to a β-hydrogen, the Cβ–H bond goes between Cα and Cβ to form the π bond, and the Cα–leaving-group bond goes to the leaving group.
What is the E2 rate law and energy diagram?
Rate = k[substrate][base]. Doubling either concentration doubles the rate, and doubling both quadruples it. The energy diagram has one transition-state peak and no carbocation intermediate.
What substrate trend is common in E2, and why?
With comparable leaving groups and suitable β-hydrogens, tertiary substrates often eliminate faster than secondary, then primary. Developing alkene character in the transition state favors routes toward more substituted alkenes. Methyl substrates have no β-carbon.
What happens if a substrate has no β-hydrogen?
It cannot undergo ordinary β-elimination from that position. A substrate with no β-hydrogens anywhere cannot undergo ordinary E2. For E1, check whether rearrangement first creates a carbocation with a usable β-hydrogen.
What do antiperiplanar and synperiplanar mean?
Antiperiplanar means the Cβ–H and Cα–leaving-group bonds are coplanar and 180° apart. Synperiplanar means they are coplanar and 0° apart. The usual E2 pathway uses the staggered anti arrangement, which has less torsional strain than the eclipsed syn arrangement.
Why does E2 favor antiperiplanar geometry?
Aligning the Cβ–H and Cα–leaving-group bonds lets the orbitals overlap as the π bond forms and the leaving group departs. The anti arrangement provides that alignment in a staggered conformation.
How do you use a Newman projection to predict an E2 product?
Look down the Cα–Cβ bond. Rotate an acyclic bond to place a candidate β-H 180° from the leaving group. Remove those groups, flatten the two carbons to form the alkene, and use the remaining substituents to assign the product’s geometry.
Why is E2 stereospecific, and how can one substrate still give both E and Z products?
A specific anti arrangement gives a specific alkene geometry. If different β-hydrogens or different accessible anti conformations lead to different geometries, both products can form. Examine each distinct eligible arrangement.
How do you assign E or Z to an alkene?
Rank the two substituents on each alkene carbon by CIP priority. The higher-priority groups on the same side give Z, and opposite sides give E. If either double-bond carbon has two identical groups, E/Z does not apply.
What determines whether an elimination reaction is regioselective or stereoselective?
Regioselectivity concerns preference for one double-bond position. Stereoselectivity concerns preference for one stereoisomer, such as E over Z at the same position. Stereospecificity concerns how starting geometry constrains which product geometry can form.
How do you rank ordinary alkene stability?
For comparable unconjugated alkenes, tetra- > tri- > di- > monosubstituted. Count carbon groups directly attached to the two alkene carbons, excluding the alkene carbons themselves. For a comparable cis/trans pair, trans is usually more stable because the groups are farther apart.
What is Zaitsev’s rule?
When multiple eligible β-eliminations are available under typical E1 conditions or E2 conditions with a small base and a good leaving group, the more substituted alkene is usually favored. Check which pathways are actually accessible before ranking products.
What is the Hofmann product, and why can a bulky base favor it?
It is the less substituted alkene. A bulky base such as tert-butoxide tends to remove a more accessible β-H, often from the less substituted β-carbon. This preference is especially common with crowded substrates and depends on the available conformations.
Why can an alkyl fluoride give a Hofmann product in E2?
Fluoride’s poor leaving-group ability can give the transition state more C–H bond cleavage and more carbanion-like character at the β-carbon. This can favor removal of a hydrogen at a less substituted β-carbon, even with a small base.
Can E2 have carbocation rearrangements?
E2 is concerted and has no carbocation intermediate, so the carbon skeleton is retained during the elimination step.
How do you list all E2 products from an acyclic substrate?
Identify every distinct β-carbon, find its eligible anti β-hydrogens, and draw the corresponding double-bond positions and any E/Z isomers. Combine symmetry-equivalent products. Then rank the accessible products using base bulk, leaving-group ability, and alkene stability.
What products can E2 of 2-bromobutane give with a small strong base?
1-Butene, (E)-2-butene, and (Z)-2-butene. The internal alkene is Zaitsev, and (E)-2-butene is usually major because it has less steric crowding than the Z isomer.
What is the trans-diaxial requirement for cyclohexane E2?
In a cyclohexane chair, the leaving group and β-H must be axial on adjacent carbons and point in opposite directions. An axial-up leaving group requires an axial-down β-H, and vice versa.
How do you find the reactive cyclohexane chair from a wedge-and-dash drawing?
Keep each substituent’s up or down orientation when drawing either chair. A ring flip swaps axial and equatorial positions while preserving up and down. Use the chair in which the leaving group is axial.
How can a cyclohexane substituent prevent one E2 product?
If the required axial position on a β-carbon is occupied by another substituent, there is no trans-diaxial β-H there. Only the other eligible side can form an alkene, even when it gives the less substituted product.
How can chair stability affect relative E2 rates of cyclohexane stereoisomers?
Compare how populated the reactive axial-leaving-group chair is and verify that it has a trans-diaxial β-H. A stereoisomer whose bulky groups can stay equatorial while its leaving group is axial often reacts faster.
How do you handle stereocenters when drawing a cyclohexene product?
The two alkene carbons become planar, so remove wedge or dash notation that represented their former tetrahedral configurations. Preserve configurations at unaffected stereocenters. Check whether equivalent elimination paths can give a pair of enantiomers.
What is the E1 mechanism, including curved arrows?
The C–leaving-group bond electrons go to the leaving group, forming a carbocation. After any rearrangement, a base removes a β-H and the Cβ–H electrons form a π bond to the carbocation carbon.
What is the E1 rate law and energy diagram?
Rate = k[substrate]. Ionization is the slow step, so changing base concentration leaves the usual E1 rate unchanged. A simple E1 diagram has two peaks with a carbocation valley between them. Activation or rearrangement can add steps.
Why can E1 use a weak base?
Deprotonation occurs after the carbocation has formed. Removing a β-H forms a π bond and neutralizes the positive charge, so water or an alcohol can act as the base.
Does E1 require an antiperiplanar β-H relative to the starting leaving group?
The leaving group has already departed when the base removes a proton, so E1 has no E2-style anti or trans-diaxial requirement. The β-C–H bond still needs orbital alignment with the carbocation’s empty p orbital as the π bond forms.
How do you predict the major E1 product?
Draw the carbocation, check for rearrangement, and then list the double bonds available by β-deprotonation. Generally favor the more substituted accessible alkene and, for comparable E/Z products, the more stable geometry.
Why do SN1 and E1 often occur together?
They share the same carbocation intermediate. A nucleophile attacking the positive carbon gives substitution, while a base removing a β-H gives elimination. Higher temperature generally shifts the product distribution toward elimination.
How do you dehydrate a secondary or tertiary alcohol by E1?
Use heat and a strong acid such as sulfuric or phosphoric acid. Protonate OH, lose water to form a carbocation, check for rearrangement, and remove a β-H to form the alkene and regenerate the acid.
Why does a typical primary alcohol avoid the usual E1 dehydration pathway?
A discrete primary carbocation would be high in energy. When direct acid-catalyzed dehydration occurs, β-H removal and water departure can be concerted. Another option is to make a tosylate and then use a strong base for E2.
How do acid-promoted substitution and acid-promoted dehydration of alcohols differ in reagent choice?
HX supplies halide to replace OH after activation. Heated sulfuric or phosphoric acid is commonly used for dehydration, with a weakly nucleophilic conjugate base that allows alkene formation.
What reagents are strong nucleophiles and weak bases in the mechanism decision chart?
Common examples include I⁻, Br⁻, CN⁻, N₃⁻, HS⁻, and RS⁻. They favor SN2 at accessible methyl, primary, and many secondary centers. At tertiary centers, SN2 is blocked, so ionization conditions matter.
What reagents are both strong nucleophiles and strong bases?
Hydroxide and small alkoxides such as methoxide and ethoxide. They can attack the α-carbon in SN2 or remove a β-H in E2. Substrate structure, solvent, and temperature determine the competition.
What reagents are strong bases with weak nucleophilicity in the mechanism decision chart?
Common examples include tert-butoxide, LDA, DBU, and DBN. They generally favor E2 when an eligible β-H is present. Steric hindrance makes α-carbon attack less competitive.
What reagents are weak nucleophiles and weak bases?
Water and ordinary alcohols such as methanol and ethanol. With a substrate that can ionize, expect SN1 and E1 competition. Ordinary methyl and primary alkyl halides generally show little reaction under these conditions.
How do methyl substrates behave in the four-mechanism decision chart?
With a suitable nucleophile they favor SN2. They have no β-carbon for E2 or E1, and formation of an ordinary methyl carbocation for SN1 is highly unfavorable.
How do primary substrates behave in the four-mechanism decision chart?
A strong, unhindered nucleophile usually gives SN2. A bulky strong base can give E2 if a β-H is available. Ordinary primary substrates rarely undergo SN1 or E1, with resonance-stabilized substrates as important exceptions.
How do secondary substrates behave in the four-mechanism decision chart?
A strong nucleophile that is a weak base typically favors SN2, especially in polar aprotic solvent. A strong base often gives E2, particularly if bulky or heated. A reagent that is both a strong nucleophile and strong base can give both SN2 and E2. Weak reagents in ionizing solvent can give SN1 and E1.
How do tertiary substrates behave in the four-mechanism decision chart?
A strong base favors E2 if an eligible β-H is available. Weak nucleophiles or bases in ionizing conditions favor SN1 and E1. SN2 backside attack is sterically blocked.
How do polar aprotic solvent, an alcohol solvent, and heat help distinguish competing mechanisms?
Polar aprotic solvent commonly boosts SN2 with anionic nucleophiles. Polar protic solvent supports ionization and is commonly used for alkoxide-promoted E2, often with the alcohol matching the alkoxide. Higher temperature typically favors elimination when substitution competes.
How do you compare SN2 and E2 when the same reagent can do both?
For SN2, ask whether the α-carbon is accessible for backside attack. For E2, ask whether a β-H can align anti to the leaving group. Primary substrates with compact reagents favor substitution, while greater α-crowding, bulkier bases, and heat favor elimination.
How do you compare SN1 and SN2 when both seem possible?
Check substrate accessibility and carbocation stability, then nucleophile strength and solvent. An accessible substrate with a strong nucleophile in polar aprotic solvent favors SN2. An ionizable substrate with a weak nucleophile in polar protic solvent favors SN1. Product inversion suggests SN2, while rearrangement or attack on both faces supports SN1.
How do you compare E1 and E2 when both seem possible?
A strong base and an eligible anti β-H favor E2. An ionizable substrate with a weak base favors E1, especially with heat. E2 is second order and stereospecific, while E1 is first order and can rearrange.
What is a reliable order for solving an exam problem on substitution or elimination?
Identify the substrate and leaving group. Classify the reagent as a nucleophile and as a base. Check the solvent and temperature. Choose the plausible mechanisms, then test for backside access, carbocation shifts, or eligible β-hydrogens as appropriate. Draw the distinct products, assign stereochemistry, and identify the major product