Objective 2

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/15

encourage image

There's no tags or description

Looks like no tags are added yet.

16 Terms

1
New cards

What happens if a destination network is not in a router's routing table?

The router drops the packet entirely.

2
New cards

What do the codes "C" and "S" mean in a routing table?

"C" means Connected (physically attached, automatic). "S" means Static (manually hard-coded by an admin).

3
New cards

What is Administrative Distance (AD)?

A "trust factor" used by routers to decide which route to use when they learn about a destination from multiple sources. Lower is better.

4
New cards

What is the Administrative Distance of a Static Route?

  1. It is more trusted than any dynamic protocol because a human administrator manually placed it there.


5
New cards

What is the standard command syntax to configure a static route?

ip route [Remote_Network_ID] [Subnet_Mask] [Next_Hop_IP]

6
New cards

Scenario: A router hears about the 10.50.0.0 network from a dynamic protocol (like OSPF) and also has a static route configured for 10.50.0.0. Which path does the router actually use?

It uses the static route because its Administrative Distance (1) is lower and more trusted than the dynamic protocol.

7
New cards

Scenario: Your network grows from 2 routers to 50 routers. Why is Static Routing a bad choice for this new topology?

It does not scale. Adding a single new subnet requires manually updating the routing table on every other router in the network. =

8
New cards
What is the primary difference between an Interior Gateway Protocol (IGP) and an Exterior Gateway Protocol (EGP)?
IGP handles routing inside a single organization's network. EGP handles routing between different organizations across the internet.
9
New cards
What is an Autonomous System (AS)?
A single massive network or collection of networks under one unified management domain (e.g., Google or Amazon's corporate network).
10
New cards
Which dynamic routing protocol is the standard Exterior Gateway Protocol (EGP) used to connect Autonomous Systems together?
BGP (Border Gateway Protocol).
11
New cards
What routing logic does a Distance Vector protocol use to determine the best path?
It uses "Hop Count" (the physical number of routers crossed), prioritizing the path with the fewest routers regardless of link speed.
12
New cards
What routing logic does a Link State protocol use to determine the best path?
It uses "Cost" based on Bandwidth (speed), prioritizing the fastest path even if it requires crossing more routers.
13
New cards
Which protocol is the standard for Distance Vector, and which is the standard for Link State?
RIP (Routing Information Protocol) is Distance Vector. OSPF (Open Shortest Path First) is Link State.
14
New cards
In OSPF, how does a higher bandwidth affect the calculated cost of a link?
A higher bandwidth results in a lower cost, and the router always prefers the lowest cost path. Formula: Cost=108Bandwidth in bps\text{Cost} = \frac{10^8}{\text{Bandwidth in bps}}
15
New cards
Scenario: A junior admin configures RIP on the warehouse network. There are two paths to the database: Path A crosses 1 router over an ancient 10 Mbps copper link. Path B crosses 4 routers over brand new 10 Gbps fiber links. Which path will RIP choose?
Path A, because it only has 1 hop (RIP is blind to the slow bandwidth).
16
New cards
Scenario: You are configuring the main border router that connects your Amazon facility to your ISP's network. Should you configure OSPF or BGP for this specific link?
BGP, because you are routing between two different Autonomous Systems (Amazon and the ISP). =