1/64
Looks like no tags are added yet.
Primary Energy
Energy contained directly in natural resources (such as coal, oil, sunlight, wind, and uranium) before any human conversion.
Secondary Energy
Energy formed when primary energy is converted into another usable form, such as electricity.
End Use
The final application or consumption of energy, like running a car or turning on a lightbulb.
Second law of thermodynamics
The scientific principle stating that energy is lost in each conversion step.
Energy conversion efficiency
The percentage of primary source energy that is successfully captured in a secondary form.
Energy end-use efficiency
The product of all the individual energy conversion and end-use steps multiplied together.
Nonrenewable energy
Energy derived from sources that exist in limited quantities and take millions of years to form, meaning they are not easily replenished.
Renewable energy
Energy sources that are continuously replenished and not depleted.
Proved reserves
The recoverable quantity of energy resources that can be extracted using current technology at current prices.
Reserves-to-production ratio (R/P)
Proved reserves divided by a particular year’s production or use, used to estimate how many years of fuel are left at current consumption rates.
Energy return on investment (EROI)
The useful energy provided by a resource divided by the amount of energy required to produce it.
Coal seams
Layers of sediment where coal is deposited, formed form dead plants in wetlands that underwent intense pressure and heat over 300-400 million years.
Syngas
A gas rich in hydrogen, carbon monoxide, and carbon dioxide produced by heating raw coal in a closed vessel during “clean coal” processing.
Kerogen
A precursor material that forms from the remains of microorganisms millions of years ago, which turns into oil (or natural gas under high heat and pressure)
Conventional oil reserves
Oil trapped underground below the groundwater level, sandwiched between permeable, sponge-like layers of rock.
Unconventional oil reserves
Oil found in more difficult geological settings that require intensive extraction, such as shale rocks or tar sand.
Existing reserves
The known, identified deposits of nonrenewable energy resources, that already exist underground and are available to be evaluated or extracted.
Primary oil recovery
The initial flow of oil (the first 20%) that is easily harvested using standard pumping techniques.
Secondary oil recovery
Additional recovery methods that involve injecting water into the reservoir to push more oil out.
Tertiary oil recovery
Advanced methods of oil recovery involving the injection of carbon dioxide, hot water, or steam to boost pressure and extract remaining oil.
Fracking
Pumping high-pressure liquids mixed with sand down a well to crack non-porous rocks (like shale) and release trapped oil or natural gas, with the sand keeping the cracks opened.
Tar sands
Large deposits of sand soaked with heavy oil that require strip-mining and squeezing to extract the oil.
Uranium
A radioactive element found in many locations and harvested via open-pit mining to fuel nuclear power plants through atom fission.
Yellow cake
Crushed uranium ore processed into a fine-powder substance before being converted to gas and centrifuged into fuel pellets.
Externalized costs
Hidden costs-such as fossil fuel subsidies or health problems caused by pollution-that are not reflected in the market price of fuels.
Economies of scale
Financial challenges where a technology’s production scale is still small, making its upfront costs high.
Wind energy
Kinetic energy harvested from wind using turbines, driven ultimately by the sun.
Solar Energy
Energy derived directly from sunlight.
Passive solar energy
Solar technology that utilizes natural lighting and heating without any mechanical devices.
Active solar energy
Solar technology that relies on mechanical devices, such as solar panels, photovoltaic cells, or solar water heaters.
Biomass energy
Energy contained in wood, crop residue, and other plant matter derived originally from solar energy via photosynthesis.
Hydropower
Energy supplied constantly by the hydrologic cycle (powered by the sun), making it the most abundantly used renewable energy source.
Impoundment
A method of hydropower where dams are built to create a large water reservoir.
Run of river
A hydropower method where a portion of a flowing river is temporarily diverted through a powerhouse.
Ocean energy
Energy that takes advantage of ocean tides, waves, and temperature differences.
Tidal power
Power driven by the moon, capturing energy as tides enter and leave bays using tidal barrages or turbines.
Wave power
Power that captures the kinetic energy of ocean waves
Ocean thermal energy conversion (OTEC)
An experimental technology using low-boiling-point chemicals that react to cold ocean temperatures.
Geothermal Energy
Energy harnessed from the Earth’s interior heat via dry-steam, flash-steam, binary-cycle plants, or ground-source heat pumps.
Solid waste
Discarded physical items categorized into municipal, industrial, hazardous, biomedical, electronic, and radioactive waste.
Municipal solid waste (MSW)
Everyday materials discarded from homes, small businesses, schools, and hospitals (such as paper, food scraps, and plastics)
Industrial solid waste (ISW)
Materials produced by industrial processes before a product ever reaches the consumer.
Single-use waste
Discarded products meant for one-time use that contribute heavily to global waste streams.
Sanitary landfills
Large, engineered holes in the ground lined with clay and plastic to safely hold trash, protect groundwater from toxic leachate, and capture methane gas.
Waste incineration
Burning municipal solid waste at high temperatures to reduce its volume down to 5-6% of its original size while scrubbing emissions and generating electricity
Hazardous waste
Wastes that are legally classified as flammable, corrosive, explosive, or toxic.
Source-specific waste
Distinct hazardous waste coming from specific, identifiable industrial sources like petroleum refiners or pesticide plants.
Nonspecific-source waste
Hazardous wastes from common manufacturing cleaners and solvents (like degreasers) categorized by chemical families rather than a single source.
Discarded commercial chemical wastes
Unused commercial solvents, paints, and cleaners thrown away by businesses.
Permanent retrieval storage sites
Special landfills heavily monitored for leaks to securely store hazardous waste.
Chemical processing
Using chemical conversion or high-temperature incineration to transform hazardous materials into less toxic substances.
Bioremediation
Using living organisms (like bacteria or fungi) to break down toxic chemicals into safer, cleaner substances.
Biomedical waste
Waste produced in large quantities by hospitals and medical facilities that can spread disease or infection.
Electronic waste
Discarded electronics and tech devices such as old smartphones.
Radioactive waste
Hazardous waste materials that emit radiation, such as spent nuclear fuel rods.
Low-level radioactive waste
Radioactive waste with a low amount of radioisotopes that makes up the greatest volume of radioactive wate and comes mostly from hospitals and labs.
High-level radioactive waste
The most dangerous radioactive waste, such as spent fuel rods
Sustainable waste management
Strategies for shrinking the waste stream and taking pressure of landfills, ranked from most desirable (preventing, reducing, reusing, recycling, and recovering energy from waste) to least desirable (disposal).
Recycling
The process of cycling waste materials back into raw materials or new consumable goods.
Closed loop recycling
A recycling strategy where materials-such as metals like aluminum-can be continuously reused, melted down, and repurposed back into the same kind of product.
Open loop recycling
A recycling strategy where materials-such as plastic-slowly deteriorate and change over time, meaning they cannot be continuously reused the same way indefinitely.
Dry-Steam Power Plants
Drills a well to tap underground boiling water/steam directly; the released steam spins a turbine to generate electricity.
Flash-steam power plant
Pumps up very hot water that is under high pressure; when pressure drops at the surface/well, the hot water boils into steam to spin a turbine.
Binary-cycle power plant
Uses warm, not hot, underground water to heat a second liquid with a lower boiling point; that second liquid boils into steam/vapor to turn the turbine.
Ground-source heat pump (GSHP)
Moves heat between the grounds and a building depending on the season, and the temperature of the building compared to temperature of the ground.