1/28
Comprehensive vocabulary flashcards covering manufacturing processes, engineering materials, electrical and mechanical systems, workshop safety, design communication, and finite element modeling.
Non-Exam Assessment (NEA)
A synoptic engineering project formally assessed by the NCFE based on a real-world brief, contributing 60% towards the overall qualification.
Glass
An engineering material characterized by being brittle, transparent, and hard.
Glass Reinforced Plastic (GRP)
A composite material made of a plastic polymer matrix reinforced with fine glass fibres.
Router
A power woodworking tool used to cut slots, grooves, and chamfers in pieces of timber.
Laser Cutting
A subtractive manufacturing process offering high precision, accuracy, and excellent repeatability, but constrained by high machinery and setup costs alongside material thickness limitations.
3D Printing (Additive Manufacturing)
A modern manufacturing technology that builds three-dimensional components layer by layer, widely used for rapid prototyping and customisation.

Quality Control (QC)
A planned production monitoring system implemented to inspect components, ensuring dimensional accuracy and product consistency.
Gantt Chart
A visual production scheduling and project management tool that maps out task durations, dependencies, and workflows across time.
Aluminium
A lightweight, corrosion-resistant, and malleable metal ideal for aircraft manufacture due to its fuel efficiency and durability benefits.
Mild Steel
A strong ferrous alloy that rusts easily and requires protective surface finishes, such as painting or galvanising.
Hardwoods
Timbers sourced from deciduous broadleaved trees (including oak, mahogany, and balsa) prized for durability and an aesthetic finish.
Alternating Current (AC)
An electrical current that periodically reverses direction, favoured in national grids for its high transmission efficiency over long distances.
Direct Current (DC)
An electrical current that flows unidirectionally and continuously at a constant value, commonly supplied by batteries.
Pulley
A simple mechanical machine consisting of a grooved wheel and belt/rope used to reduce the effort force needed to lift or move a load.
Kelvin (K)
The base unit of thermodynamic temperature in the International System of Units (SI).
Just-in-Time (JIT) Delivery
A logistics and inventory strategy that schedules raw material deliveries precisely when needed in manufacturing, preventing stockpiling and lowering storage costs.

Tenon Saw
A hand saw with a stiff brass or steel back designed for making precise, straight cuts in woodworking joinery.
Engineer's Square
A precision metalworking inspection tool with a fixed stock and blade used to mark and check accurate right angles (90∘).
Electrical Conductivity
The physical property of a material that quantifies its ability to permit the flow of an electric current through it.
BS 8888
The British standard outlining technical product documentation, technical drawing specifications, geometric tolerances, and surface finishes.

Orthographic Projection
A standardized engineering drawing technique displaying accurate two-dimensional views (such as front, top, and section views) with full dimensions to ensure components fit and are manufacturable.

Finite Element Modelling (FEM)
A computational simulation method that simulates complex structural stresses and loads to optimize engineering designs prior to physical prototyping.
Wooden Dowel Joint
A wood-joining technique utilizing fluted cylindrical pins inserted into pre-drilled holes with adhesive to produce a strong, concealed mechanical bond.
PVA Wood Adhesive
A water-based wood glue that penetrates wood pores to create a permanent bond stronger than the wood itself, requiring clamping during cure.
Bandsaw Safety Controls
Mandatory safety devices including adjustable blade guards, wheel guards, an emergency stop button, and push sticks to safeguard machine operators from blade hazards.
Slag Heap
A mound of non-useful waste residue left behind from mining and ore smelting operations that alters natural landscapes and requires decades to regenerate.
Assessment Objective 1 (AO1)
The assessment objective requiring learners to recall knowledge and demonstrate fundamental understanding of engineering principles and tools.
Assessment Objective 2 (AO2)
The assessment objective evaluating a learner's ability to apply engineering knowledge and understanding to real-world contexts and novel scenarios.
Assessment Objective 3 (AO3)
The assessment objective focused on developing analytical thinking skills to evaluate engineering data, make reasoned judgements, and reach supported conclusions.