1/86
Looks like no tags are added yet.
what are the two types of radiation?
primary and remnant
what is primary radiation?
-The original X-ray beam that exits the X-ray tube
- Not as strong as original photon entering patient, but
still strong enough to go straight through
- Carries vital anatomical information used to form the
visible image
what are the subsets of primary beam?
secondary and scatter
how does primary radiation travel?
travels in a straight line toward the patient
what is the purpose of primary radiation?.
starts the imaging process and carries the main energy needed to take the X-ray
within the primary beam, what happens in the patient?
secondary and scatter
-so beam is still primary until it exits the patient
do secondary and scatter interact?
yes, in a negative way to differing degrees
when is the primary beam no longer considered and is now called secondary/scatter?
when any part of the beam is affected, meaning interacts and changes direction
how much of the primary beam is off-focused?
25%
where does off-focused radiation originate?
in tube
where does scatter originate?
in patient and xray table
primary radiation reaaches the image receptor as what?
only as the remnant (exit) beam
what is secondary radiation?
interact inside the patient but do not scatter
how does secondary radiation work?
When some of the primary photons hit atoms inside the patient's body or equipment, they transfer energy and trigger new, weaker rays.
what is the purpose of the secondary radiation?
generally a byproduct that does not help form a clear image, especially if these photons scatter.
what does secondary radiation refer to?
any radiation resulting from interactions WITHIN the patient
what is scatter radiation?
secondary radiation that bounces off or deflects in random directions but keeps traveling
How does scatter radiation affect image quality?
strikes IR at incorrect angles
-fogs the image, lowers contrast, and creates noise
what are the 3 causes of scatter?
-high kVp
-large field sizes
-large tissue thickness
what is remnant(exit) radiation?
radiation that exits the patient
-it exposes the IR to create the X-ray image
how does remnant(exit) radiation work?
strikes the digital sensor or image receptor
what is the purpose of remnant (exit) radiation?
carries the actual internal pattern of bones and soft tissues to create the final diagnostic picture
what is remnant radiation made of?
-unattenuated primary radiation
-scatter radiation
what percent of the primary beam travels straight through the patient without interacting with atoms?
less than 5%
what percent that reaches the IR is secondary?
about 1%
what happens to the remaining % of radiation?
either absorbed by patient or exits in form of scatter and some reaches IR
what is attenuation?
the partial absorption of the x-ray beam
what is attenuation also referred to as?
partial absorption
what is the primary to remnant path of a photon?
penetrate part and go directly to expose IR
what is the primary to secondary to remnant path of a photon?
interact in patient, do NOT change direction and may get to IR but usually very weak photon once it interacts in patient
what is the primary to scatter to remnant path of a photon?
interact in patient, change direction (materially altered), scatter, and some may eventually expose IR
what does it mean if the photons never leave patient?
interact in patient and become totally absorbed
what is radiographic noise?
any unwanted information on the image that interferes with the visibility
what is the msot common cause of noise?
scatter
what is fog?
positive unwanted density characterized by a dull gray appearance, usually resulting from scatter
effects of fog:
_____ contrast?
decreases
effects of fog:
_____ density?
increased
effects of fog:
_____ visibility?
decreases
how can fog be controlled?
1. proper use of exposure factors, especially proper kVp
2. increase collimation/use of lead blockers
3. use of grids
4. compression of the part
whatr is a primary method to prevent scatter?
collimation
as thickness increases, fog?
increases; due to scatter
what is the density (composition) of subject matter?
bone, muscle, fat, tissue, air
as composition increases, fog?
increases
as kVp ______, scatter increases and fog from scatter _____?
-increases
-increases
as area ______, scatter increases
increases
as collimation increases, scatter _________?
decreases
what are artifacts?
form of image noise, any unwanted info on image
SID affect on amount of exposure reaching the patient and the image receptor?
inversely
SID affects magnification ?
inversely
SID affects patient dose?
inversely
SID affects both visibility and resolution?
directly
If SID increases but OID stays the same, the x-rays from the focal spot spread ______ after they pass the object on their way to the IR.
less
As OID increases, magnification ______?
increases (directly)
As OID increases, resolution
decreases (inversely)
As OID increases, density/receptor exposure?
decreases (inversely)
As OID increases, contrast
increases (directly)
As OID increases, size of part?
increases (directly)
what is the inverse square law?
the intensity of radiation is inversely proportional to the square of the distance
as SID increases, resulting density?
decreases (inversely)
as SID increases, dose ?
decreases (inversely)
what is the inverse square law formula?
I1/I2 = D2^2/D1^2
what is the square law formula?
mAs 1/mAs 2 = D1^2/D2^2
if SID is increased, mAs must be ? which raises dose
increased
What happens to ESD when SID increases without changing mAs?
ESD decreases
What happens to ESD when SID increasesandmAs is adjusted using the Direct Square Law?
ESD is approximately maintained, assumingotherexposure conditions remain constant.
As the SID increases the Source to
Skin Distance (SSD) _______ which provides the
________ patient ESD
increases
-decreased
as SID and collimation increases, dose ?
decreases
why should studies be done at 48"?
have decreased magnification and better resolution
how to find SOD?
SID-OID
what is the primary controlling factor over magnification?
SID/SOD
for effects on resolution and magnification, SID/SOD ratio must ?
be considered in conjuction with each other in the form of a ratio
magnification is _________ proportional to the SID/SOD ratio?
directly
as SID/SOD ratio increases, magnification?
increases (directly)
by either decreasing OID or increasing SID, the ratio will ? and magnification ?
decrease
-decrease
whats the % mag formula?
(SID/SOD- 1 ) x 100
what is the mag factor?
SID/SOD
when is SID and OID considered separately when discussing their effects on?
density and contrast
when can SID and SOD NOT be considered separately in controlling their effects on?
magnification and resolution
what is magnification?
ratio between size of image and size of object
how to calculate the size of part on x-ray compared to actual size?
(image size)- (object size)/ (object size) x 100
if OID increases, sharpness ?
decreases
If SOD increases, sharpness ?
increases
how to calculate unsharpness?
FS x OID/SOD
how to calculate sharpness?
SOD/ FS xOID
Focal spot size and OID have an _______ on sharpness/resolution?
inverse
SOD has a ______ on sharpness/resolution?
direct
As SID increases, contrast?
not affected