1/161
hehehehehe
What is an aerospace engineering hazard?
Reveal answer
Anything that threatens successful completion of a system's mission.
What primarily determines atmospheric drag on spacecraft?
Reveal answer
Altitude and atmospheric density.
At what altitude does atmospheric drag become negligible?
Reveal answer
Above approximately 600 km.
What spacecraft characteristics affect atmospheric drag?
Reveal answer
Speed, shape, size, and orientation.
What is the ballistic coefficient?
Reveal answer
A measure describing how an object's characteristics influence its response to atmospheric drag.
What is space debris?
Human-made objects in orbit that no longer serve a useful purpose.
What happened to the CERISE satellite in 1996?
A collision with space debris destroyed its long boom.
What caused the damage to the Challenger window in 1983?
A tiny paint flake traveling at orbital velocity.
What causes variations in solar intensity?
Sunspots, solar flares, and changing solar magnetic fields.
What produces the Sun's approximately 11-year cycle?
Periodic changes in solar magnetic activity.
What is the F10.7 solar flux index?
A measure of solar radio emissions at a 10.7 cm wavelength.
What does the sunspot number indicate?
The level of solar activity.
What is the geomagnetic Ap index?
A measure of daily geomagnetic activity.
What does a high Ap index indicate?
Increased geomagnetic disturbance, potentially from solar storms.
How does solar activity affect spacecraft environments?
It changes atmospheric density, radiation, magnetic activity, and solar pressure.
What determines radiation damage to spacecraft materials?
Total radiation dose and the time over which it is received.
What is the magnetosphere?
The region around Earth dominated by its magnetic field.
What is the South Atlantic Anomaly?
A region where the Van Allen radiation belt approaches Earth unusually closely.
Why is the South Atlantic Anomaly hazardous to spacecraft?
It exposes spacecraft to unusually high proton concentrations.
What is spacecraft surface charging?
The accumulation of electrical charge on different spacecraft surfaces.
What can spacecraft electrical discharge cause?
Electronic interference, power loss, coating damage, and equipment failure.
What is sputtering in the space environment?
Energetic ions eroding spacecraft surfaces and coatings.
What is a Single Event Upset?
A charged particle temporarily changes an electronic component's stored information.
What is a Single Event Latchup?
A particle-induced condition that causes an electronic component to stop functioning normally.
What is a Single Event Burnout?
A particle-induced event that permanently destroys an electronic component.
What is the Total Dose Effect?
Long-term radiation damage to semiconductor materials.
What are the three main phases of aircraft design?
Conceptual design, preliminary design, and detail design.
What is the primary goal of each aircraft design phase?
Reducing uncertainty about the aircraft design.
What happens during conceptual aircraft design?
Configuration concepts are explored and a suitable overall design is selected.
What happens during preliminary aircraft design?
The selected configuration is refined and major design decisions are finalized.
What happens during detail aircraft design?
Individual components, structures, and systems are designed for construction.
What is top-down aircraft sizing?
Using historical aircraft data to establish initial design estimates.
What is bottom-up aircraft design refinement?
Improving initial estimates using detailed component and engineering analyses.
What is the first step in initial aircraft sizing?
Define the aircraft's mission.
What are examples of aircraft missions?
Passenger transport, cargo transport, surveillance, and combat.
What are aircraft mission requirements?
Performance specifications such as payload, range, speed, and endurance.
Why are conceptual aircraft sketches useful?
They help evaluate configuration, component placement, and available space.
Why is lift-to-drag ratio important?
It strongly influences aircraft range, endurance, and thrust requirements.
What is parasite drag?
Drag primarily caused by skin friction and the aircraft's exposed surfaces.
What is induced drag?
Drag associated with generating lift.
What is aspect ratio?
A measure comparing wing span with wing area.
What is wetted aspect ratio?
Aspect ratio calculated using total wetted surface area instead of wing planform area.
What is gross takeoff weight?
The aircraft's total weight at the beginning of its mission.
What four components make up gross takeoff weight?
Crew, payload, fuel, and empty weight.
What is included in aircraft empty weight?
Structure, engines, landing gear, avionics, and fixed equipment.
What is empty-weight fraction?
The proportion of gross aircraft weight represented by empty weight.
How does empty-weight fraction generally change with aircraft weight?
Reveal answer
It generally decreases as total aircraft weight increases.
What factors influence empty-weight fraction?
Reveal answer
Aircraft type, size, materials, and wing-sweep configuration.
What is fuel fraction?
Reveal answer
The proportion of gross aircraft weight allocated to fuel.
What are the three components considered in fuel requirements?
Reveal answer
Mission fuel, reserve fuel, and trapped fuel.
What is trapped fuel?
Reveal answer
Fuel remaining in tanks that cannot be pumped out.
Why is reserve fuel required?
Reveal answer
To provide additional fuel beyond the planned mission requirements.
What is a mission profile?
Reveal answer
The sequence of flight segments an aircraft must complete.
What are common aircraft mission segments?
Reveal answer
Takeoff, climb, cruise, loiter, descent, and landing.
What is the purpose of a cruise segment?
Reveal answer
To cover the required distance efficiently.
What is a loiter segment?
Reveal answer
Extended flight over an area for surveillance or other mission tasks.
What is specific fuel consumption?
Reveal answer
A measure of fuel consumed relative to engine output.
What is thrust-specific fuel consumption?
Reveal answer
Fuel consumption divided by the thrust produced.
How is propeller-engine fuel consumption commonly expressed?
Reveal answer
Fuel consumption relative to engine power output.
What is the range of an aircraft?
Reveal answer
The distance it can travel under specified operating conditions.
What is aircraft endurance?
Reveal answer
The amount of time an aircraft can remain airborne.
What aerodynamic property strongly affects range and endurance?
Reveal answer
Lift-to-drag ratio.
What is cruise-climb flight?
Reveal answer
Flight where altitude gradually increases as aircraft weight decreases.
Why is consistent unit usage important in aircraft sizing?
Reveal answer
Mixing incompatible units produces incorrect calculations.
What is the purpose of the bisection method in aircraft sizing?
Reveal answer
Finding a solution to the nonlinear gross-weight estimation problem.
What is thrust-to-weight ratio?
Reveal answer
The ratio of available engine thrust to aircraft weight.
What does a higher thrust-to-weight ratio generally provide?
Reveal answer
What does a higher thrust-to-weight ratio generally provide?
Reveal answer
What are disadvantages of a higher thrust-to-weight ratio?
Reveal answer
Heavier engines, greater fuel consumption, and increased takeoff weight.
What ratio commonly characterizes jet aircraft propulsion?
Reveal answer
Thrust-to-weight ratio.
What ratio commonly characterizes propeller aircraft propulsion?
Reveal answer
Power-to-weight ratio.
What is thrust matching?
Reveal answer
Comparing required thrust across flight conditions to determine engine size.
Which thrust estimate determines engine sizing?
Reveal answer
The largest required thrust estimate across the evaluated flight conditions.
Why must thrust-to-weight estimates be adjusted to takeoff conditions?
Reveal answer
Aircraft weight and engine thrust change throughout the mission.
What is wing loading?
Reveal answer
Aircraft weight divided by reference wing area.
How does low wing loading affect wing size?
Reveal answer
It generally requires a larger wing.
What flight characteristics are affected by wing loading?
Reveal answer
Stall speed, climb rate, takeoff distance, landing distance, and turning.
Which wing-loading estimate governs initial wing sizing?
Reveal answer
The lowest required wing loading across the evaluated conditions.
What is maximum lift coefficient?
Reveal answer
The greatest lift coefficient an airfoil or wing can produce.
How do flaps affect maximum lift coefficient?
Reveal answer
They increase maximum lift, improving low-speed performance.
What is the purpose of a reality check in aircraft sizing?
Reveal answer
Comparing preliminary estimates with existing aircraft to evaluate plausibility.
What is the basic principle behind rocket propulsion?
Newton's third law: expelling mass backwards produces an equal and opposite reaction, generating thrust.
How do air-breathing engines obtain oxygen?
They take oxygen from the surrounding atmosphere.
Why can conventional air-breathing engines not operate in space?
They depend on atmospheric oxygen for combustion.
Why are rockets suitable for spaceflight?
They carry both fuel and oxidizer, so they do not depend on atmospheric air.
What is a major disadvantage of carrying oxidizer in a rocket?
It adds substantial mass and volume to the vehicle.
What two characteristics are desirable when selecting an aircraft engine?
High thrust-to-weight ratio and low thrust-specific fuel consumption.
How do jets and propellers differ in producing thrust?
Jets accelerate a smaller mass of air by a large amount; propellers accelerate a larger mass by a smaller amount.
What is the basic operating principle of an air-breathing engine?
It takes in atmospheric air and accelerates the airflow rearwards.
What are the two main components of a propeller engine?
A power plant and a propeller.
What does the power plant do in a propeller engine?
It produces mechanical power and torque to turn the propeller.
What does the propeller do?
It converts power-plant torque into aerodynamic thrust.
What are common power plants used in propeller aircraft?
Reciprocating piston engines and turboprop engines.
What is a propeller hub?
The central structure to which the propeller blades are attached.
Why are propeller blades shaped like airfoils?
Their aerodynamic forces have a forward-directed component that produces thrust.
How can a propeller blade be understood aerodynamically?
As a finite-length wing that is twisted along its span.
Why does a propeller blade have greater pitch near its root than near its tip?
Rotational speed varies along the blade, so twist helps maintain a more uniform angle of attack.
Where is the overall propeller pitch angle conventionally measured?
At 75% of the propeller radius.
Why is relative airflow different at the root and tip of a propeller blade?
The rotational speed is greater farther from the hub.
What is the purpose of twisting a propeller blade?
To maintain a relatively uniform angle of attack along the blade.
What can happen if a propeller blade is not twisted appropriately?
Its angle of attack can become nonuniform, potentially causing stall and reduced thrust.