1/28
C4.1.1 - C4.1.8: 1-14; C4.1.9 - C4.1.18: 15-29
C41.1.1 Population (1)
C41.1.1 Population:
Group of organisms of the same species that can interbreed, living in the same area at the same time and are interacting with each other
C4.1.2 Sampling (3)
C4.1.2 Sampling:
Sampling techniques allow us to collect data from a smaller, representative sample to learn about the whole population
Random sampling (for non-motile species)
Capture-mark-released-recapture and Lincoln index (for motile species)
C4.1.2 Random Sample (4)
C4.1.2 Random Sample:
One type of random sampling is to make use of a quadrat
Positions of the sampling points are random or due to chance
Will have a certain degree of sampling error
Need to increase the sample size
C4.1.3 Quadrats (4)
C4.1.3 Quadrats:
These are square frames used to estimate the number of organisms in an area
It is placed on the ground, and the number of organisms within it is counted
Include the organism if at least 50% is sitting within the quadrat
Quadrate are useful for random sampling plants or slow-moving animals such as snails
C4.1.3 Quadrat Sampling Formula (2)
C4.1.3 Quadrat Sampling Formula:
Total population size = total area / area sampled x no. of organisms of that species counted in sample
Population estimate may not be representative - some areas may have more of the species than average - should increase the number of quadrat throws
C4.1.3 Random Sampling - Strengths and Limitations (1 + 2, 1 + 1)
C4.1.3 Random Sampling - Strengths and Limitations:
Strengths:
No researcher bias
Useful for non-motile/sessile species
Limitations:
If sampling size is too small - not representative of the entire population (conduct power calculation to make sure you have counted enough quadrats)
C4.1.4 Capture-Mark-Release-Recapture (6)
C4.1.4 Capture-Mark-Release-Recapture:
Capture as many individuals as possible
Count & mark captured individuals in a way that won't affect their survival (e.g. dyes, tags)
Wait an amount of time for the individuals to reintegrate into the population
Return the marked individuals back to their habitats
Recapture another sample after some time and count the number of marked and unmarked individuals
Use Lincoln index to estimate population size
C4.1.4 Capture-Mark-Release-Recapture & Lincoln Index Assumptions (5)
C4.1.4 Capture-Mark-Release-Recapture & Lincoln Index Assumptions:
No migration in/out of the environment
No deaths/births OR death rate = birth rate during sampling
Marks remain visible throughout the experiment
Marks don't affect survival of organism
Marked and unmarked individuals have the same chance of getting captured
C4.1.4 Lincoln Index

C4.1.5 Carrying Capacity (K) (3)
C4.1.5 Carrying Capacity (K):
The maximum population size that can be sustained by the environment
Population number often oscillates around the carrying capacity
Denoted as (K) on population graphs - negative feedback loop
C4.1.5 Limiting Factors (1 + 2)
C4.1.5 Limiting Factors:
K is affected by the resources available in the environment (limiting factors)
Abiotic: water, light, pH, humidity
Biotic: number of preys & predators, food availability, competition, diseases & pathogens - promote competition
C4.1.6 Control of Population Size by Negative Feedback Loops (1 + 2)
C4.1.6 Control of Population Size by Negative Feedback Loops:
Population curve within a stable environment:
As population number increases beyond K, drops back down due to negative feedback
Negative feedback causes the graph to oscillate around the carrying capacity
C4.1.6 Density Dependent vs Density Independent Factors (2 + 2, 1 + 2 + 3)
C4.1.6 Density Dependent vs Density Independent Factors:
Population size is regulated by environmental factors that limit population growth. These may be dependent or independent of the population density
Density independent factors:
Brings about the same effect to the population regardless of population size
e.g. natural disasters like forest fires, tornados (abiotic)
Density dependent factors:
Effect is stronger when there is a higher population density
Examples:
Inter/intra-specific competition
Predation
Parasites/diseases
C4.1.7 Sigmoid (S-Shaped) Population Growth Curves (5)
C4.1.7 Sigmoid (S-Shaped) Population Growth Curves:
Populations with unstable numbers tend to display a sigmoid (s-shaped) growth curve
Slow and gradual initial increase as there are fewer individuals to reproduce
Exponential increase due to an excess of resources because population size is below the carrying capacity
Increase in population size slows down as it approaches K (more competition, fewer resources)
Population size stabilises and oscillates around K due to negative feedback

C4.1.9 Community (1)
C4.1.9 Community:
Community: populations of different species living in the same geographical area at the same time and interacting with one another
C4.1.9 Intraspecific Competition (4 + 3)
C4.1.9 Intraspecific Competition:
Intraspecific competition is competition for resources between members of the same species
Members of the same species compete for all of the same resources as they all have the same ecological niche
Intraspecific competition increases due to density dependent factors
Members of a species will compete for:
Territory for feeding and reproducing
Mates for reproducing
Social dominance in social species
C4.1.10 Two Types of Intra-specific Relationships (2 + 4)
C4.1.10 Two Types of Intra-specific Relationships:
Intraspecific competition: individuals of the same species compete for limited resources (e.g. lions competing for food)
Intraspecific cooperation: individuals of the same species are working together --> leads to an increase of access to food and territories
Group hunting (wolves, lions, coyotes)
Defence against predators (schools of fish)
Group foraging (monkeys)
Group parenting (meerkats)
C4.1.11 Types of Ecological Relationships (6)
C4.1.11 Types of Ecological Relationships:
Herbivory: herbivore eating plants (cow and grass)
Predation: predator that hunts prey to gain nutrients (cheetah and gazelles)
Interspecific competition: (red and grey squirrels)
Mutualism: a close relationship between two organisms of different species, in which both individuals benefit from the activity of the other (bees and dandelions)
Parasitism: host is being harmed while parasite benefits (dogs and ticks)
Pathogenicity: microorganism causes diseases in a host (malaria in humans caused by parasites)
C4.1.12 Mutualism - Legumes and nitrogen-fixing bacteria
C4.1.12 Mutualism - Legumes and nitrogen-fixing bacteria:
Only 20% of legumes are known to fix nitrogen
Provide a home for the rhizobia
Rhizobia convert N2 from the atmosphere into ammonia
Legumes release flavonoids from their roots that call the soil bacteria towards the root hairs of the legume plant
Rhizobium move towards root hairs and begin to attach
Root hair then curls around the rhizobia
Bacteria is then able to move down the root and
Bacteria use nitrogenase to
FIX NOTES GET FROM PPT
C4.1.12 Mutualism - Orchids and mycorrhizae fungi
C4.1.12 Mutualism - Orchids and mycorrhizae fungi:
Mycelia runs through the earth and connects with the root system of enamouring plants
Threads create a dense network
Fungi can efficiently absorb water and minerals (phosphorus, nitrogen) - transport them straight to the tree roots
Water and minerals are transported into the leaves
Fungus gets carbohydrates from the plants
So much dextrose is produce than the tree needs
Fungi helps tree to absorb water, and in return it gets dextrose to survive and grow
C4.1.12 Mutualism - Corals and Zooxanthellae algae
C4.1.12 Mutualism - Corals and Zooxanthellae algae:
Algae is the autotroph, coral is the animal (heterotroph)
Polyp takes in minerals from water and mixes with proteins
Deposits calcium carbonates
Polyp builds its own skeleton and adds structure to the reef
Zooxanthellae (algae) use energy from the sun to photosynthesise - provides oxygen, sugars, and fats needed for the coral
Coral gives them a protective place to live
C.4.13 Alien, Invasive, and Endemic Species (3)
C.4.13 Alien, Invasive, and Endemic Species:
Alien species: species that are newly introduced to an environment by humans, can be accidental or deliberate - as alien species grow in number, they can become invasive species
Invasive species: not native to the ecosystem and causes harm to the environment (if not causing harm they are alien species)
Endemic species: species that occur naturally within an area, population size controlled by density dependent factors
C4.1.13 Red and Grey Squirrels
C4.1.13 Red and Grey Squirrels:
Grey squirrel - invasive
Red squirrel - endemic
Outcompete them for food and habitat
Grey carries squirrel pox deadly to the reds
Grey are larger in body size (more resources), don’t have predators, grow very fast and reproduce quickly, benefit from killing red squirrels
Greys have been eradicated from the Isle of Anglesey
Pine marten are a native predator to grey squirrel - greys start to decline and reds recover
Reds have evolved with the pine marten - can better escape
Preventing greys from arriving
C4.1.16 Predator-prey relationships graph
C4.1.16 Predator-prey relationships graph:
When prey populations are high, predator populations are low
When predator populations are high, prey populations are low
When prey populations are low, predators have less food to consume, thus prey populations are able to reproduce and increase in population
Prey populations are higher overall
Predators are on a higher trophic level - get less energy passed to them
Predators have to eat a lot of prey to obtain energy
Prey population peaks earlier than predators - because reproduction of preys takes time
C4.1.17 Top-down Approach (2)
C4.1.17 Top-down Approach:
Using predators that sit on higher trophic levels to manage the numbers of organisms in trophic levels below
E.g. Wolves & elk population in Yellowstone
C4.1.17 Bottom-up Approach (2 + 4)
C4.1.17 Bottom-up Approach:
Availability of resources (nutrients, sunlight, water) at the lowest trophic level dictate plant growth, which supports larger populations of herbivore, which then supports more carnivores
Management of algal bloom
Algae are producers
Reducing nutrients puts pressure on the lowest trophic level
Low nutrients results in small populations of algae
This affects many other species in the ecosystem
C4.1.18 Allelopathy (2)
C4.1.18 Allelopathy:
Allelopathy is the release of chemicals by one organism which influences the germination, growth, survival or reproduction of another organism
Biochemicals that reduce survival of competitors
C4.1.18 Allelopathy - Black Walnut Tree (3)
C4.1.18 Allelopathy - Black Walnut Tree:
Black walnut trees produce and release an allelopathic chemical called juglone
Juglone inhibits the growth of many plants including tomatoes
Allelopathy reduces competition from other plants for resources needed by the black walnut tree
C4.1.18 Secretion of Antibiotics (4)
C4.1.18 Secretion of Antibiotics:
The Penicillium fungus secretes the antibiotic chemical penicillin
Penicillin inhibits the growth of bacteria near the fungus, reducing competition for resources
Penicillin is used as a medicine to inhibit bacterial growth
Penicillium (fungus) --> penicillin --> broad spectrum antibiotic
By killing bacteria around it --> leaves more nutrients for itself