1/46
Comprehensive qualitative review questions and answers covering momentum transport, shell balances, Navier-Stokes equations, tensor operations, boundary conditions, and drag around spheres.
Viscous normal stresses are proportional to the rate of change of what quantity?
Linear deformation
What are two characteristics that differ between developing laminar flow and fully developed laminar flow through a pipe?
In developing flow, velocity profiles change in the streamwise direction (whereas fully developed flow has a stable, parabolic profile), and there are large pressure gradients in the developing flow region.
What physical stresses are responsible for viscous drag and form drag?
Viscous shear stress is responsible for viscous drag, while pressure and normal viscous stress are responsible for form drag.
Why does the solution for Stokes flow over a solid sphere not apply to Stokes flow over a liquid droplet?
Cant assume v=0 at the fluid-fluid boundary; only velocity continuity (no slip) applies (tangential velocity at the interface is the same for both fluids)
What is the primary distinction between Cauchy's equation of motion and the Navier-Stokes equations?
Cauchy's equation applies to all fluids, whereas the Navier-Stokes equations apply only to Newtonian fluids.
The dot product of velocity and the Navier-Stokes equations yields an equation for what physical quantity?
Mechanical energy.
How does a Couette viscometer work?
The outer part of the annulus contains fluid and the inner bob is connected to a torsion spring; deflection on the spring is dependent on viscosity.
What is the physical meaning of the substantial derivative (DtD) in the equations of change?
It represents the time rate of change of a property (such as temperature or momentum) as observed by someone moving along with a specific fluid particle at the local fluid velocity.
When setting up a shell momentum balance, what three types of boundary conditions are most commonly used to evaluate constants of integration?
No-slip at a solid-fluid interface (fluid velocity equals wall velocity). 2. Continuity of velocity and shear stress at a fluid-fluid interface. 3. Symmetry at the centerline (velocity gradient is zero).
According to the equation of continuity, what mathematical condition must be met for a flow to be considered incompressible?
The divergence of the velocity field must be zero (∇⋅v=0).
What assumptions are required to simplify Cauchy's equation of motion into the Navier-Stokes equations?
The fluid must be Newtonian and have both constant density and constant viscosity.
What assumptions simplify the Navier-Stokes equations to the Euler equation?
The fluid is inviscid (viscosity μ=0), meaning viscous forces are neglected entirely.
In the combined momentum flux tensor ϕ=pδ+τ+ρvv, what physics does the term ρvv represent?
Convective transport of momentum (momentum carried simply by the bulk motion or advection of the fluid itself).
When applying Newton's law of viscosity in three dimensions for a compressible fluid, what is the additional viscosity parameter K called, and for what type of fluid is it strictly zero?
It is called bulk viscosity, and it is strictly zero for monatomic gases at low density.
How do the mathematical outcomes of taking the divergence of a velocity vector versus the gradient of a velocity vector differ?
The divergence of a vector results in a scalar field, whereas the gradient of a vector results in a second-order tensor (a dyadic product).
If the curl of a velocity field equals zero, what does this indicate about the flow, and what physical property does the curl represent?
The flow is irrotational. Represents the fluid's vorticity (twice the local angular velocity of the fluid elements)
What is the primary difference in evaluating shear stress (τxy) compared to viscous normal stress (τxx) using Newton's law of viscosity?
Shear stress is proportional to the rate of shear deformation (∂y∂vx+∂x∂vy), whereas viscous normal stress is proportional to the rate of linear deformation (∂x∂vx) and incorporates a term for fluid compressibility (∇⋅v).
What theorem mathematically transforms the volume integral of the divergence of a tensor into a surface integral?
Gauss's Divergence Theorem.
Why does the Reynolds number emerge when non-dimensionalizing the Navier-Stokes equations, and what does it physically represent?
It emerges from scaling the inertial terms against the viscous terms using characteristic lengths and velocities. It physically represents the ratio of inertial forces to viscous forces in the flow, dictating whether the flow is laminar or turbulent.
In cylindrical coordinates, if a velocity profile is postulated as vz=vz(r), vθ=0, and vr=0, what physical characteristic justifies setting all ∂θ∂ terms to zero?
Axisymmetry (rotational symmetry) of the physical geometry and boundary conditions.
What physical meaning does the permutation symbol ϵijk have in tensor operations, and how does it behave if two of its indices are swapped?
It represents the cross product (curl) in index notation. It is completely antisymmetric, meaning swapping any two indices changes its sign.
When solving for flow through a horizontal tube instead of a falling liquid film, what primary driving force replaces gravity?
The pressure gradient applied across the ends of the tube.
Does the physical entity represented by a tensor or second-order tensor change when the reference frame is altered?
No, although specific numerical components will change.
What is the mathematical purpose of the Kronecker delta (δij) and permutation symbol (ϵijk)?
They compactly express formulas by eliminating summation signs.
What tensor order results from the dyadic product (a⊗b or ab) of two vectors, and is this mathematical operation commutative?
It results in a second-order tensor, and the operation is not commutative.
What are the mathematical results of taking the gradient of a scalar field versus the divergence of a vector field?
The gradient of a scalar field results in a vector, while the divergence of a vector field results in a scalar.
What does the combined momentum flux tensor (ϕ) consist of, and what does the pressure term within it represent?
The molecular momentum flux tensor (due to diffusion) and the convective momentum flux (tensor due to advection). The pressure term within the molecular component describes the flow rather than the material itself, meaning it contains no thermophysical properties.
What physical process does the viscous dissipation function (Φv) represent in the mechanical energy equations?
It represents the irreversible conversion of mechanical energy into internal energy (heat) due to viscous friction within the fluid.
In the shell balance method, why are boundary conditions mathematically necessary, and what is the physical meaning of the no-slip condition?
Boundary conditions are required to evaluate the constants of integration that appear when solving differential equations for velocity profiles. The no-slip condition means that the velocity of the fluid at the wall is zero if the wall is stationary.
What is the conceptual difference between solving a flow problem using the shell balance method versus equations of change?
The shell balance method performs momentum balances over thin geometric control volumes for specific one-dimensional flows, whereas equations of change use generalized partial differential equations (continuity and motion) that serve as a universal starting point for any isothermal system regardless of geometry.
What physical statement does the equation of continuity make regarding mass flux and density in a continuum?
The time rate of change of density is equal to the negative divergence of the mass flux.
What does the substantial derivative (DtD) physically track in a fluid flow?
It tracks how a property changes as one moves along with a specific fluid particle.
The equation of motion serves as the continuum equivalent of what fundamental physics law, and what does it balance?
It is the continuum equivalent of Newton's second law (F=ma) for a local fluid element, equating the rate of increase of momentum to the net momentum transport (both convective and molecular) plus external forces like gravity.
What two types of drag make up the total kinetic force acting on a sphere moving through a fluid, and what stresses cause them?
Form drag, which arises from normal pressure stresses, and skin friction, which arises from tangential shear stresses.
How is creeping flow defined in the context of flow around a sphere, and what is its defining physical characteristic?
Creeping flow is defined by a Reynolds number of less than about 0.1. It is physically characterized by the complete absence of eddy formation downstream from the sphere.
What strict physical boundary conditions must be satisfied by the fluid at the surface of a stationary sphere?
The fluid must satisfy the no-slip condition (tangential velocities vθ=0 and vϕ=0) and the impermeability condition (normal velocity vr=0).
Why does fluid density not appear in Stokes' Law (Fd=6πμRv∞) for the drag on a sphere?
Stokes' Law applies only to the creeping flow regime where inertial forces are negligible. Because inertia is ignored, drag is entirely dominated by viscous forces and the sphere's dimensions.
Why does a slightly roughened sphere experience a sudden drag drop at a lower speed than a smooth sphere?
Surface roughness trips the attached boundary layer into turbulence earlier. This turbulent layer brings more momentum near the wall, delaying flow separation to a higher angle and narrowing the wake.
Why does the laminar boundary layer on a smooth sphere separate at approximately 80∘ instead of the theoretical 105∘−110∘?
A real flow wake displaces the outer stream, moving the minimum pressure point forward to 70∘−75∘. Since a laminar boundary layer can only tolerate a short adverse pressure gradient, it separates just a few degrees past this minimum.
If a fluid is in a state of pure, rigid-body rotation at a constant angular velocity, what is the value of its viscous stress tensor?
The viscous stress tensor is identically zero, meaning no viscous stresses are present, because viscous stresses require fluid deformation rather than uniform rotation.
In a vertical cylindrical shell balance, what two primary forces balance the net momentum fluxes to drive the fluid flow?
The pressure difference between the top and bottom of the cylinder and the gravitational body force acting on the fluid shell.
In the subcritical flow regime, why is the form drag on a sphere so high?
The boundary layer separates early (around 80∘). The base pressure on the rear of the ball remains approximately equal to the low pressure at the separation point, meaning there is almost no pressure on the rear face.
What physical mechanism causes a fully rough sphere to have more drag than a smooth sphere at very high supercritical speeds?
As the Reynolds number rises, the viscous sublayer thins until surface bumps poke through, causing extra momentum loss near the wall due to form drag on the bumps. This tires the boundary layer, causing the separation point to creep forward again and widen the wake.
When calculating the normal force exerted by a fluid on a solid sphere using the stress tensor, why must a negative sign often be affixed to the normal stress terms?
The standard sign convention dictates that stresses act from a region of greater coordinate to a lesser coordinate. Since the fluid is at a greater radial coordinate than the sphere surface, a minus sign is required to represent the force on the solid.
What is the physical difference between the buoyant force and the kinetic force acting on a submerged object?
The buoyant force is the weight of the displaced fluid (exists even if the fluid is completely at rest) The kinetic force arises from the relative motion of the fluid past the object
Why is the substantial derivative omitted when solving the Navier-Stokes equations for creeping flow around a sphere?
In creeping flow, the inertial terms (represented by the substantial derivative) are assumed to be negligible and are removed, allowing the equations of motion to be solved purely based on pressure, gravity, and viscous forces.
In turbulent pipe flow, why do injected particles spread out much more rapidly in the radial direction compared to laminar flow?
Even though the mean radial velocity is zero, turbulent flow contains substantive unsteady radial velocity fluctuations (eddies) that rapidly mix and transport the particles outward, whereas laminar flow relies only on slow molecular diffusion.