1/67
Looks like no tags are added yet.
predominant component of oint
with oily or waxy ingredients such as hydrocarbons, waxes, and polyols
how are oint classified?
based on type of base it has
oint are composed of a base + active ing added to base
2 most common hydrocarbon int bases
USP white petrolatum
USP and white ointment
describe nature of hydrocarbon bases
oleaginous/oily, highly lipophilic
as hydrocarbon bases are highly lipophilic, only a small amount of _______ ing can be added
aqueous
major advantage of hydrocarbon bases
serve as occlusive dressings, meaning that they keep air and water out
emollient, meaning they keep water vapor in the skin, by forming a lipophilic barrier.
prolonged contact time of medication on skin
strong stability
don’t dry out
disadvantage of hydrocarbon bases
hard to wash off due to their lipophilic nature
absorption bases
lipophilic, but are able to absorb water
occlusive
emollient
advantages of absorption bases
occlusive & emollient; contain water helping to hydrate the skin & can keep water in the skin due to lipophilic barrier
2 categories of absorption bases
can form w/o emulsions (hydrophilic petrolatum, USP and lanolin USP)
bases already w/o emulsion (hydrous lanolin, USP)
water-removable bases
o/w emulsions such as hydrophilic oint, USP
technically creams, but considered oint due to waxy & greasy texture
external phase = water— easy to wash off skin/clothing with water
what base is good for a hydrophobic drug?
water-removable
oil is internal phase of these bases
external and internal phase of water-removable bases
external = water
internal = oil
water soluble bases
hydrophilic bases such as polyethylene glycol ointment, USP that have a greasy or waxy texture and are therefore considered “greaseless” bases since they are not hydrophobic but have a waxy texture.
overall, the drug should have a _________ affinity for the base than the skin, ensuring that the drug diffuses well into the skin rather than remaining in the base
lower
cream
either w/o or o/w semisolid emulsions and it should be mentioned that while absorption and water-removable bases are typically described as ointments, they are more technically described as creams.
tend to have a less oily, waxy, or greasy feel than ointments and are typically more balanced in their oil and water content while ointments tend to be more oily and lipophilic in nature.
tend to have a slightly less occlusive and emollient nature compared to ointments.
are creams or ointments more occlusive and emollient?
ointments
are creams or ointments more balanced in their oil and water content?
creams
are creams or ointments more oily and lipophilic in nature?
ointments
2 types of gels
spherical inorganic particles that aggregate in strands, forming a system across the gel
particles with intersecting fibers that form the network across the gel
lotions
can be either medicated or unmedicated and are distinguished by their higher viscosity than liquid topical formulation and use across large areas of the body. Lotions can be suspensions, such as calamine lotion, USP, or emulsions, but are more fluid than the semisolid emulsions of creams.
t/f: lotions are more fluid than the semisolid emulsions of creams
true
pastes
suspensions which contain a high concentration of powder, giving the paste a high viscosity, which gives them both a stiff and gritty feel. They have the advantage of providing a protective coating.
Ex. zinc oxide paste, USP and carboxymethylcellulose sodium paste, USP.
advantage of paste
provide protective coating
primary advantage of topical aerosol application
does not require touching the affected area keeping the person applying the topical agent from being contaminated by the skin or the skin contaminating the container of the dosage form
major disadvantage of topical aerosols
inherent waste involved with spraying the aerosol where some is lost to the air or misses the target area.
what makes sprays distinct from topical aerosol?
distinct in that while aerosols are propelled by the vapor pressure of the propellant, sprays are propelled by the mechanical pressure created by the spray bottle mechanism
2 main issues that led to need for transdermal drug delivery
some drugs are not conducive to oral delivery as they are unstable in stomach acid, highly metabolized by the liver, or poorly absorbed in the GIT
inconvenience of parenteral delivery as primary alternative systemic
transdermal patches
transdermal drug delivery system (TDDS) that contain a specific dose of drug and deliver it at a consistent rate over a given time period
advantages of transdermal drug delivery
allow a drug to be delivered at a controlled rate and maintain consistent drug plasma levels over a long duration, 24 hrs to a week.
can lead to increased efficacy and decreased risk of toxicity compared to oral dosage forms as plasma levels are kept more consistent.
simple to use dosage form and therefore can help with patient compliance.
Unlike oral dosage forms, first-pass metabolism is bypassed and therapy can be stopped at any point by removing the patch.
disadvantages of transdermal drug delivery
can only hold so many milligrams of active drug, so doses need to be kept to a maximum of 20 mg per day and 10 mg per day is preferred.
The drug must also be relatively small (< 500 Da) as larger molecules and hydrophilic drugs experience poor diffusion making it a difficult route for delivery of biologics.
TDDS can cause skin irritation or contact dermatitis, typically due to the adhesive used in the patch.
poor adhesion of the patch can lead to poor absorption.
TDDS formulations are typically higher cost than an oral formulation.
general structure of skin
1.5-3mm thick
epidermis, dermis, and subcutaneous layer
protects body from external threats
helps passively regulate body temp
carries water to skin surface
epidermis
contains keratinized cells allowing epidermis to serve as a barrier bw body & outside world
no blood vessels
dermis
papillary layer (below basal layer)
reticular layer
contains pain receptors, nociceptors, collagen fiber bundles, sebaceous glands, sweat glands, nerves, and blood vessels
subcutaneous layer/hypodermis
not part of skin
contains areolar & adipose connective tissues & helps to hold the skin to the tissues beneath it
serves as padding bw skin & bodily tissues
contains ample blood vessels
which layer with ample blood vessels is the target of drug delivery?
subcutaneous layer
what happens in transdermal delivery if drugs are too lipophilic?
they can be stored in the adipose tissues located in the subcutaneous layer prior to being released into the blood vessels
gives drugs a longer duration of action — duration of action varies based on amt of subcutaneous fat pt has in that area
primary barrier for small molecules in transdermal delivery systems
stratum corneum (topmost layer of epidermis)
what is the barrier for larger molc in biologics like proteins/peptides in transdermal delivery?
basal layer
transcellular delivery in transdermal
the drug moves in a straight line through the keratinized cells into one lipid membrane, into the cytoplasm, and then out the other side of the lipid membrane
paracellular pathway in transdermal
drugs move around the cells through the intercellular lipid matrix
If a drug uses the ___________ pathway, you can expect that the drug will spread out across more surface area of the skin due to its less direct pathway compared to a drug that utilizes the transcellular pathway.
paracellular
transappendageal pathway
moves along hair follicles or sweat ducts into the subcutaneous layer and the microneedle pathway
which we will discuss more later allows drugs to penetrate more deeply into the epidermis past the stratum corneous, but not into the dermis
implications of partition coefficient transdermal/dermal delivery
Non-drug compounds that are hydrophilic or lipophilic and diffuse readily and easily can be included in the patch formulation. For delivery of a hydrophobic drug that prefers a lipophilic environment, hydrophobic non-drug compounds that diffuse easily can be included in the patch. These then can diffuse into the skin making the skin environment more hydrophobic than the patch and aiding the diffusion of the hydrophobic drug. This technique can also be used in the inverse to aid diffusion of a hydrophilic drug.
characteristics of drugs that are good candidates for transdermal/dermal delivery
small
lipophilic
primary dosage forms of transdermal drug delivery
patches
main adverse effect of transdermal drug delivery system patches
skin irritation typically due to the patch adhesive that can cause reddening, heat sensations, or cause individuals to develop sensitivities.
3 types of TDDS
matrix
reservoir
drug in adhesive
matrix TDDS
contain drug particles within a gel matrix that controls the release rate of the drug.
have a backing layer that prevents loss of drug to the outside of the patch and an adhesive 5 layer that adheres to the skin which comes packaged with a liner that must be removed prior to application
reservoir TDDS
use a rate-controlling membrane to control rate of drug release
have a backing layer that prevents loss of drug to the outside of the patch and an adhesive 5 layer that adheres to the skin which comes packaged with a liner that must be removed prior to application
drugs in adhesive TDDS
newest patch style which are a form of matrix TDDS. Here the matrix and adhesive are combined and the drug is contained in the matrix/adhesive layer. This can help to improve the onset of action time as the drug does not first have to diffuse through the adhesive layer to reach the skin as the drug is already incorporated in the adhesive layer when it is applied.
Having a small dose of drug in the adhesive can also be used with the other TDDS methods to help speed onset of action
chemical permeation enhancers
improve drug diffusion for drugs that don’t all
In order for a drug to reach the blood vessels of the subcutaneous layer, it must permeate the stratum corneum which is highly ___________ and then must diffuse from the stratum corneum to the deeper layers of the skin where the blood vessels lie.
hydrophobic
category 1 chemical enhancer
improves diffusion by altering the skin barrier of stratum corneum
glyceryl monolaurate, methyl laureate, ethanol (can be used in combination)
category 2 chemical enhancer
by increasing drug content in the stratum corneum to improve the concentration gradient difference between the stratum corneum and the deeper layers to speed the diffusion step
category 2a chemical enhancer
they can help to change the relative difference in lipophilicity and hydrophilicity of the patch and the skin effectively using the partition coefficient to aid drug diffusion
ex. povidone and polyvinylpyrrolidone which are both hydrophilic and absorb water from the skin creating a more hydrophobic area of the skin and a more hydrophilic environment in the patch improving diffusion of hydrophobic drugs
category 2b chemical enhancer
they can use supersaturation of the patch to create supersaturation in the stratum corneum to aid drug diffusion; created by changing patch manufacturing— drug & adhesive are dissolved in a larger amt of solvent and applied to patch. after being applied to patch, the drying process evaporates some of the solvent leaving a supersaturated soln on the patch which drives drug diffusion
main reservoir controlling drug diffusion rate = stratum corneum
main reservoir controlling drug diffusion rate for category 2b chemical enhancers
stratum corneum
biggest hurdled for category 2b chemical enhancer
ensuring that the supersaturated solution in the patch is stable enough so that the drug does not crystallize or precipitate out of the solution prior to the patch being used.
delivery optimized thermodynamics (DOT)
matrix can help to maintain high levels of drug in the patch. uses two different adhesives: an acrylic adhesive containing the drug which is dispersed across a silicone adhesive. The drug has high solubility in the acrylic adhesive and lower solubility in the silicone adhesive. The acrylic adhesive areas become the drug reservoir and the drug then diffuses into the silicone adhesive which covers the majority of the patch surface area and allows diffusion into the skin.
iontophoresis
uses a low-voltage electrical current to move charged molecules across the skin barrier
equipment req for iontophoresis
source of electricity, two electrodes, a chamber for the drug, and a chamber for the salt which completes the circuit
if a drug is cationic, which chamber does it lie in?
positively charged anode chamber
how does iontophoresis work?
The cationic drug lies in the positively charged anode chamber while the salt solution is in the cathode chamber or vice versa if the drug is negatively charged.
As charges that are alike repel each other (positive repels positive and negative repels negative), this then drives the drug into the skin under the electrical current.
how can temp be used to improve drug delivery?
warm temp improve drug diffusion → increases blood supply to the skin’s surface → improves sink conditions
increase in temp also increases fluidity of the lipids in the skin
Controlled heat-aided drug delivery (CHADD) system
utilize a chemical reaction to generate heat when the patch is applied to improve drug delivery.
electroporation
uses high-voltage electricity (unlike iontophoresis which uses low-voltage electricity) in short millisecond pulses to create transient pores in the skin that allow drugs with poor diffusion to permeate the skin barrier
microdermabrasion
a technique that removes layers of the stratum corneum and is commonly used in beauty salons and spas to improve the aesthetics of the skin. As this lessens the thickness of the stratum corneus,
also been used to improve permeation of drugs. This method uses a template with holes and microdermabrasion is performed over these holes and then drug is applied over top of the holes. The holes then become specific channels for drug delivery that allow drug to more easily cross the stratum corneum barrier.