Lab 7

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/20

encourage image

There's no tags or description

Looks like no tags are added yet.

21 Terms

1
New cards

DNA migrates from the…

negative to the positive pole

2
New cards

The loading dye should NOT…

run off the end of the gel

3
New cards

% w/v means…

grams per 100 ml

4
New cards

TAE = Tris-acetic acid

Commonly used buffer in agarose gel electrophoresis

5
New cards

“Heat the solution in the microwave for about 1 min on “high”. Watch to make sure it doesn’t boil over. Careful taking your flask out- it’s hot! Swirl the agrose solution around until all crystalline material is in solution.” The solution should appear…

Completely clear

6
New cards

What is the point of the barriers in the Gel Electrophorsis?

To prevent the agarose from leaking out of the tray

7
New cards

What happens if the agarose is too hot?

It will stress the casting tray

8
New cards

GelRed

  • DNA stain

  • Ultra-sensitive, extremely stable, and environmentally fluorescent nucleic acid dye designed to replace the highly toxic (carcinogenic) ethidium bromide for staining double stranded nucleic acids in agarose gels


9
New cards

Even though GelRed is noncytoxic, nonmutagenicand nonhazardous at concentrations well above the working concentrations used in gel staining, we still recommend…

Wearing gloves when handling the reagent or stained DNA gels

10
New cards

The DNA is negatively charged and will always run towards the…

  • Positive electrode

  • Always Run to Red


11
New cards

Why must the loading dye be added to the samples?

The DNA solution is denser than the electrophoresis buffer and will sink to the bottom of the gel well

12
New cards

The buffer contains glycerol or sucrose to…

Achieve increased density as well as a dye which migrates through the gel (faster than most DNA) so that the approximate progress of the gel can be measured without actually visualizing the DNA

13
New cards

The ladder should run on…

both sides of the PCR samples

14
New cards

What does the purification kit rely on to allow binding to the silica gel matrix inside the column

Salt concentration and pH

15
New cards

The initial buffer that the PCR reaction is suspended in contains a pH indicator that is ____ at the correct pH and ___ when the pH is too high

Yellow , Purple

16
New cards

Absorption to the matrix is typically…

Greater than 95% if the pH is <7.5, but drops steeply above pH 7.5

17
New cards

What is the point of the centrifugation step?

Removes residual wash buffer and ethanol from the column

18
New cards

Some of your DNA preps probably generated PCR products, while others did not. In this hypothetical example: What would it mean if your DNA prep did not generate a PCR product for bla-TEM, but the positive control lane displayed a band of the correct size, while the negative control lane showed no DNA?

If there is no PCR product in the negative control, then our reagents weren’t contaminated with DNA and no stray DNA got in. Our results are accurate. The positive control showed that the PCR worked. The negative control showed that there was no contamination. This indicates that the bacterial DNA prep doesn’t have the bla-TEM gene.

19
New cards

What is the difference between phenotype and genotype?

Phenotype includes the physical characteristics whereas, genotype includes the genetic material.

20
New cards

Why is the 16S ribosomal RNA gene used in determining the species identity of bacteria?

Contains conserved regions shared among bacteria and variable regions that help distinguish different bacterial species. 

21
New cards

How much sequence length of 16S gene is required identify species of bacteria?

~1500 bp.