1/51
Looks like no tags are added yet.
Film processing
— is a series of steps that converts the invisible latent image on an exposed dental X-ray film into a visible, permanent radiographic image
visible image
Aims of film processing
Convert the latent image into a —
permanent
Aims of film processing
Preserve the image so that it remains — and can be used for diagnosis
latent image
A — is the invisible pattern of stored energy formed when X-rays interact with silver halide crystals in the film emulsion
many
Air and soft tissue x-ray penetration
fewer
bone x-ray penetration
few or no
amalgam and gold restorations x-ray penetration
more blackening
Air and soft tissue film effect after processing
intermediate gray appearance
bone film effect after processing
lighter or white appearance
amalgam and gold restorations film effect after processing
chemical processing
The latent image cannot be seen until the film undergoes —
manual processing
Methods of Film Processing
uses processing solutions and film hangers
automatic processing
Methods of Film Processing
uses a machine with rollers that transport the film through the processing stages
daylight processing
Methods of Film Processing
permits film handling without a conventional darkroom
self-developing films
Methods of Film Processing
contain developer and fixer in a special film packet
time-temperature method
Three manual processing techniques
Development time is selected according to the developer temperature and the manufacturer's instructions
modified time-temperature method
Three manual processing techniques
Development time is adjusted according to
the solution temperature using a prepared chart
visual method
Three manual processing techniques
The operator observes the developing film under safelight illumination and removes it when the image appears adequate. This method is subjective and produces less consistent results
development
The Five Basic Steps of Film Processing
Exposed silver halide crystals are reduced to black metallic silver, making the latent
image visible. The developer amplifies the latent image by a very large factor
rinsing
The Five Basic Steps of Film Processing
In manual processing, the film is gently rinsed in water for approximately 30 seconds
to dilute the developer, slow development, and remove the alkali activator
fixing
The Five Basic Steps of Film Processing
The fixer removes unexposed silver halide crystals and hardens the film emulsion,
helping preserve the image
washing
The Five Basic Steps of Film Processing
Running water removes residual processing chemicals from the film
drying
The Five Basic Steps of Film Processing
Films are air-dried in a dust-free area or dried using moderately warm air. They must
be completely dry before handling, mounting, and viewing
5 minutes at 68°F
Standard manual processing times
development
30 seconds with continuous agitation
Standard manual processing times
rinsing
4 minutes; agitate for 5 seconds every 30 seconds
Standard manual processing times
fixing
10 minutes in clean running water
Standard manual processing times
washing
Until completely dry
Standard manual processing times
drying
the developer and the fixer
Two main chemical solutions are used:
Developing agents: phenidone and hydroquinone
Reduce exposed silver halide crystals to metallic silver
activator
Creates an alkaline environment and swells the gelatin emulsion
sodium sulfite
Prevents oxidation of the developing agents
potassium bromide and benzotriazole
Suppresses development of unexposed crystals and helps prevent fog
ammonium thioslfate
Dissolves and removes unexposed silver halide crystals
acetic acid buffer
Maintains an acidic pH of approximately 4–4.5 and inactivates developer carried into the fixer
sodium sulfite
Helps prevent oxidation of the clearing agent and staining
aluminum sulfate
Hardens gelatin, reduces emulsion swelling, and shortens drying time
film hangers
manual processing of film transport
depends on temperature and prescribed times
processing time of manual processing
required
rinsing between developer and fixer of manual processing
air drying or drying cabinet
drying of manual processing
simple equipment and direct control
main advantage of manual processing
motor-driven rollers
film transport of automatic processing
4-6 mins
processing time of automatic processing
not required
rinsing between developer and fixer of automatic processing
built in drying chamber
drying of automatic processing
faster and more consistent processing cycles
main advantage of automatic processing
higher equipment cost and maintenance requirements
main disadvantage of automatic processing
more operator dependent
main disadvantage of manual processing
film feed slot
Entry point for unwrapped film
daylight processing
This method allows film handling without a conventional darkroom, using a lightproof loader or enclosed processing system.
daylight processing
It is useful when space for a darkroom is limited.