1/42
Looks like no tags are added yet.
AP Tib/Fib
position
projection
CR
position = extend leg, include both joints within 1-2 inches from edges of IR, rotate slightly so intermalleolar and interepicondylar lines are parallel with IR
projection = AP
CR = perpendicular to midpoint of leg
AP tib fib
kV
collimation
sid
70-80 kVp
collimate to include knee and ankle joint within 1-2 inches of edges of IR
minimum 40”SID, 44-48” appropriate
ap tib fib criteria (3)
entire tib fib demonstrated
knee and ankle joints demonstrated
partial superimposition of tibia and fibula at both proximal and distal ends
lateral tib fib
position
projection
cr
position: lateral recumbent on affected side, include both joints (1-2 inches within edges of IR), intermalleolar and interepicondylar lines are perpendicular with IR (might need to prop up foot)
projection: mediolateral (standard)
cr perpendicular to midpoint of leg
lateral tib fib
kv
collimation
sid
65-80 kVp
collimate to include both knee adn ankle joints within 1-2 inches of edges of IR
minimum 40” SID, 44-48” appropriate
lateral tib fib criteria (5)
entire tib fib demonstrated
both knee and ankle joints demonstrated
proximal head of fibula superimposed with tibia
distal fibula superimposed over posterior half of tibia
shafts of tibia and fibula free of superimposition
ap knee
position
projection
cr
position: leg extended, rotate leg medially 3-5 degrees until interepicondylar line parallel to IR (patella pointing upwards and is in the middle)
projection: AP
CR: parallel to tibial plateaus ( ½ inch distal to patella) (NO ANGLE if avg size, asthenic = 5 degrees caudal, hypersthenic = 5 degrees cephalic)
ap knee
kV
collimation
SID
65-80 kVp
10×12” portrait
40” SID
ap knee criteria (4)
femorotibial joint space open
knee joint centered to collimation field (patella in middle)
articular facets profiled
slight superimposition of fibular head with tibia
ap medial oblique
position
projection
cr
Position: MEDIAL OBLIQUE; extend leg, rotate medially 45 degrees so that the interepicondylar line is 45 degrees to IR
Projection: AP
CR: ½ inch distal to apex of patella (no angle of tube)
ap medial oblique
kv
collimation
sid
65-80 kVp
collimate 12×10 portrait
40”SID
medial oblique knee criteria (3)
Patella is over the medial condyle of femur
Proximal tibiofibular joint open
Lateral condyles of femur and tibia demonstrated
criteria lateral oblique knee (3)
Patella over lateral condyle of femur
Fibula superimposed over tibia
Medial condyles of femur and tibia demonstrated
lateral knee
position
projection
cr
Position: LATERAL; lateral recumbent on affected side, flex knee/leg 20-30 degrees, femoral epicondyles are superimposed and perpendicular to IR, patellar plane is perpendicular to IR
Projection: mediolateral (standard) (lateromedial = trauma, USE caudal angle instead)
CR 5-7 degrees cephalic, CR 1 inch distal to medial epicondyle
lateral knee
kv
collimation
sid
65-80 kVp
40” SID
12×10” portrait
lateral knee criteria (3)
Femoral condyles superimposed (perpendicular with IR)
Patella in profile (indicates no rotation)
Patellofemoral joint space open
less superimposition of tibia and fibular head?
more superimposition of tibia and fibular head?
less superimposition = over rotated
more superimposition = under rotated
goal = slight superimposition ~ ½ of fibular head
AP / PA weight bearing Knees demonstrates ?
cartilage degeneration and other knee pathologies
AP/PA weight bearing knees
position
projection
cr
Position: patient upright, feet together, both knees on IR ; PA = knees bent 20 degrees until thighs and knees touching IR
projection = either pa or ap
cr = AP = perpendicular, ½ inch below patellar apex between the two knees; PA = 10-15 degrees caudal ½ inch below patellar apex between two knees
ap/pa weight bearing knees
kv
collimation
sid
70-80 kVp
Collimate landscape bilaterally to include distal femur and proximal tib/fib
40” SID
ap/pa weight bearing criteria (3)
Knee joints centered to collimation field
No rotation of knees
Joint spaces open
tunnel views study what?
intercondylar fossa
camp coventry method - tunnel view
position
projection
cr
Position: patient prone, leg flexed 40-50 degrees, interepicondylar line is parallel with IR
projection PA axial (perpendicular to tib/fib so angle depends on how much patient angles their leg)
CR perpendicular to lower leg (angle tube CAUDAL and adjust SID), centered to popliteal crease
camp coventry tunnel view
kV
SID
70-80 kVp
40” SID
Holmblad method - tunnel view
position
projection
cr
(make sure patient can put weight on knees)
Position = on hands and knees, lean forward 20-30 degrees, interepicondylar line parallel with IR
projection = PA
cr = perpendicular to IR, directed to popliteal crease (no tube angulation)
holmblad method
kv
sid
collimation
70-80 kvp
40” sid
Collimate 12×10 portrait
ap axial tunnel view - eclere method
position
projection
cr
Position = patient laying on back, knee flexed 40-45 degrees, IR built up under knees
Projection : ap axial
CR = perpendicular to lower leg (angle CEPHALIC based on lower leg and adjust sid), cr centered ½ inch distal to patella
ap axial intercondylar fossa tunnel view criteria (3)
Intercondylar fossa in profile
No rotation
Articular facets and intercondylar eminence well visualized
PA patella (bucky)
position
projection
cr
Position = prone, extend leg, interepicondylar line parallel with IR (5 degree internal rotation) (might need to support foot to keep leg extended)
Projection PA
CR perpendicular to mid patella area (popliteal crease)
pa patella
kvp
sid
collimation
40” sid
Collimate 9x9
70-80 kVp
pa patella criteria (2)
patella centered to collimation field
No rotation
lateral patella (no grid required)
position
projection
cr
Position = lateral recumbent on affected side, flex knee only 5-10 degrees, femoral epicondyles are superimposed (perpendicular with IR), patellar plane perpendicular to IR
Projection mediolateral, tangential
Cr perpendicular to mid patellofemoral joint
lateral patella
kv
sid
collimate
70-80 kVp
40” SID
Collimate to include knee joint
why do we flex lateral patella only 5-10 degrees?
more than 10 degrees can cause separation of fragments
lateral patella criteria (2)
Patella and knee joint in center of collimation field
Patella in true lateral
merchant bilateral method
position
projection
cr
grid or nongrid
Position = merchant board bends leg and holds IR for you, patient laying on back, knee flexed 40 degrees
Projection = tangential axial
Cr angled 30 degrees from horizontal caudal?, tangentially between patellae
nongrid bc of air gap
merchant bilateral
kv
sid
Sid 48-72” (72 best because greater distance = less magnification)
70-80 kvp
merchant bilateral criteria (2)
Intercondylar sulcus and patella visualized
Patellofemoral joint spaces open
inferosuperior tangential sunrise view
position
projection
cr
Position = bilateral or unilateral, patient supine, knee flexion 40-45 degrees, place IR edge mid thighs and perpendicular to CR
Projection tangential axial
Cr 10-15 degrees to lower legs, tangentially between knees at level of patellofemoral joints
inferosuperior sunrise view
kv
sid
SID 40-48”
70-80 kVp
hughston method - tangential
position
projection
cr
Position = prone, knee flexed 50-60 degrees (use tape)
Projection tangential axial (cephalic)
CR 15-20 degrees to lower leg, 45 degrees from table, directed tangentially through the patellofemoral joint
hughston method
sid
kv
Sid 40-48”
70-80 kVp
settegast method
position
projection
cr
Position = prone, knee flexed 90 degrees (use tape) (SEATED IS DISCOURAGED BC FACE IN LINE OF BEAM)
Projection tangential axial
Cr 15-20 degrees to lower leg, directed tangentially through the patellofemoral joint