1/114
Looks like no tags are added yet.
Outsourcing some production is a means of _______ a capacity constraint.
overcoming
The impact that a significant change in capacity will have on a key vendor is a
supply chain factor
Which of the following is not a strategy to manage service capacity or cope with service capacity limitations?
storing inventories of the service
Which of the following is not a determinant of effective capacity?
actual output
When buying component parts, risk does not include
interest rate fluctuations
Which of the following would not be a potential upside in a decision to outsource?
disclosure of proprietary information to supplier
The method of financial analysis which focuses on the length of time it takes to recover the initial cost of an investment is
payback
A market constraint can be overcome by
advertising or price changes
Which of the following makes using present value approaches in capacity decisions difficult?
Capacity decisions are made amidst much uncertainty, so cash flows cannot be estimated with great accuracy
When determining the timing and degree of capacity change, one can use the approach of
expand-early strategy
The term capacity refers to the maximum quantity an operating unit can process over a given period of time
true
If the unit cost to buy something is less than the variable cost to make it, the decision to make or buy is based solely on the fixed costs
false
Increasing productivity and also quality will result in increased effective capacity
true
Utilization is defined as the ratio of effective capacity to design capacity
false
Increasing capacity just before a bottleneck operation will improce the output of the process
false
Capacity increases are usually acquired in fairly large “chunks” rather than in smooth increments
true
The more current capacity exceeds desired capacity, the greater the opportunity for profit
false
Capacity planning requires an analysis of needs: what kind, how much, and when
true
Waiting line analysis can be useful for capacity design, especially for service systems
true
Among decision environments, risk implies that certain parameters have probabilistic outcomes
true
The maximin approach involves choosing the alternative that has the “best worst” payoff
true
Among decision environments, uncertainty implies that states of nature have wide-ranging probabilities associated with them
false
The maximin approach involves choosing the alternative with the highest payoff
false
Expected monetary value gives the long-run average payoff if a large number of identical decisions could be made
true
The Laplace criterion treats states of nature as being equally likely
true
In a decision-making setting, if the manager has to contend with limits on the amount of information he or she can consider, this can lead to a poor decision due to __________.
bounded rationality
Departmentalizing decisions increases the risk of ________ leading to a poor decision.
suboptimization
Suppose a firm has decided to break its departments down into smaller units. While this likely will help with _______ issues, it raises the possibility that poor decisions will result due to _______.
span of control; suboptimization
The term “suboptimization” is best described as the
result of individual departments making the best decisions for their own areas but hurting other areas
Which phrase best describes the term “bounded rationality”?
limits imposed on decision making by costs, time, and technology
A tabular presentation that shows the outcome for each decision alternative under the various possible states of nature is called a:
payoff table
Which of the following characterizes decision making under uncertainty?
the likelihood of possible future events is unknown
Which of the following is not an approach for decision making under uncertainty?
decision trees
Determining the worst payoff for each alternative and choosing the alternative with the “best worst” is the approach called:
maximin
Determining the average payoff for each alternative and choosing the alternative with the highest average is the approach called:
Laplace
The maximin approach to decision making refers to:
maximizing the minimum return
The expected monetary value (EMV) criterion is the decision-making approach used with the decision environment of:
risk
Which of the following is not a stage in the decision-making process?
monitor the competition
Risk implies that there are certain parameters that have _________ outcomes.
probabilistic
A decision making involving certainty about potential future conditions will have a relatively _______ decision.
straightforward
A decision tree is:
a schematic representation of alternatives
Group technology is closely connected to cellular manufacturing.
true
“Balance delay” is another name of the percentage of idle time in a product layout.
true
The minimum of workstations for a production line is determined in part by the desired output rate.
true
Morale problems can be a reason for redesign of a facility layout.
true
Mismatches between operational capabilities and market demand can have a negative impact on an organization.
true
Repetitive processing systems repetitively rotate production through small batches of a variety of products.
false
Which type of processing system tends to produce the most product variety?
job shop
Which one of the following is not common to product layouts?
ability to adjust to changes in demand
The type of layout in which workers, materials, and equipment are moved to the product as needed is
fixed-position
Which term is most closely associated with cellular manufacturing?
part families
The minimum possible cycle time in a typical product layout with no parallel activities is determined by the
longest task time
A common goal in designing process layouts is
minimizing transportation costs
Which of the following is not a significant concern for process selection?
pricing strategy
The ______ process type requires _______ flexibility of equipment.
job shop; high
Common reasons for redesign of layouts includes
I) efficient operations
II) accidents or safety hazards
III) new products or services
IV) morale problems
II, III, and IV
The grouping of equipment by the operations needed to perform similar work for part families is
cellular manufacturing layout
Ergonomics is the use of computers and robots in the workplace.
false
Job enrichment involves giving workers a greater share of the total task, which is why they feel enriched.
false
One of the potential benefits of self-directed teams is higher quality.
true
Methods analysis cannot be done for new jobs (ones that do not yet exist) since it requires observation of the process.
false
Predetermined time standards are usually based on observing one very efficient worker performing the task.
false
Therbligs are basic elemental motions.
true
Work sampling is most frequently used to set time standards.
false
One factor in determining how many cycles to time in a time study is the degree of variation that is present in the observed times.
true
The design of work systems is based on objective standards and thereby avoids most ethical issues.
false
Predetermined time standards involve the use of published data regarding how long various activities are expected to take.
true
Work sampling involves the use of some method of randomizing the observations.
true
Time-based systems compensate employees according to the time they have worked and the amount of output they produce.
false
Giving a worker a larger portion of the total task is known as job:
enlargement
Which of the following is not an advantage of time-based pay systems?
incentives to increase output
Which of the following is not a potential benefit of the use of self-directed teams?
greater satisfaction for middle managers
The chart used to review the overall sequence of an operation by focusing on the movements of either the operator or materials is called a:
flow process chart
The chart used to focus on busy and idle portions of a work cycle is a:
worker-machine chart
In motion studies, a therblig is a:
basic elemental motion
The motion study that describes the movements of both hands at the same time is a:
simo chart
In a stopwatch time study, adjusting the normal time by an allowance factor for normal delays and interruptions results in the:
standard time
The technique which can be used to estimate the percentage of time a worker or place of equipment is idle is known as:
work sampling
Which of the following is not an advantage of work sampling compared to stopwatch time study?
it is better suited for short, repetitive tasks
Which of the following statements should not characterize an operations strategy toward the design of work systems?
manufacturing technology is the heart of a business
The design of work systems typically involves:
I) work measurement
II) job design
III) compensation
IV) the use of outside consultants
I, II, and III only
Sometimes improvements in labor requirements are more apparent than real because of:
increases in indirect labor
The more _______ a task, the less likely it is that a substantial learning curve will be in effect.
routine
The fact that human activities typically improve when they are done on a repetitive basis is described by a(n):
learning curve
To which worker would learning curves be most applicable?
auto service mechanic
One production is underway and learning curve effect is coming, successive changes made to the production process will cause the time per unit to:
cause a scallop effect
On a log-log graph, learning curves appear as:
straight lines
In which of the following managerial activities would learning curves probably be the least useful?
location analysis
Which one of the following would learning curves probably affect the least?
layout analysis
To which of the following challenges are learning curves important considerations?
capacity planning
Which of the following is an example of a carryover effect?
previous experience that is relevant to the current scenario
The learning curve theory is useful in all of the areas except for which of the following?
advertising media selection
Increasing volumes result in ______ the learning curve.
moving down
When are learning curves most relevant to managerial decision making in mass production settings?
before processes are stabilized
The fact that most types of firms are located in every section of the country suggests that in many cases, location decisions are not overly important; one location typically is as good as another.
false
Advanced communications has aided globalization.
true
The first step in developing location alternatives is identifying important factors.
false
An example of a regional factor in location planning is the location of our markets (either existing or potential).
true
A strategy that emphasizes convenience for the customers would probably select a single very large facility.
false
The center of gravity method uses the earth’s center to establish grid coordinates in three dimensions.
false