Engineering Study Guild

Drill Press

Used to drill accurate holes.

Safety for Drill Press

Keep drill bits and machine clean, keep guards and clamps in place, lubricate the drill bit when drilling metal, support underside of the stock.

Miter Saw

Used to cut straight lines and miter angles.

Safety for Miter Saw

Wear respiratory protection, keep one hand at least 6 inches away from the blade.

Table Saw

Used to cut straight lines and smooth cuts on small and long boards.

Crosscut vs. Rip Cut

Crosscut refers to cutting across the grain, while rip cut refers to cutting with the grain.

Safety for Table Saw

Always use rip fence for rip cuts, use miter gauge for crosscuts, keep material flat against the table, adjust the fence when power is off.

Bandsaw

Used to cut wood and metal stock.

Safety for Bandsaw

Keep hands at least 2 inches from the blade, never start the bandsaw with the workpiece against the blade, hold the workpiece firmly.

Spindle Sander

Grinds stuff down with sandpaper at an angle and/or with a curve.

Safety for Spindle Sander

Mark the workpiece, choose the right drum size, attach sandpaper, and use heavy gloves and a dust mask.

Belt/Disc Sander

Disc sander for smaller projects, belt sander for shaping, trimming, and leveling larger projects.

Safety for Belt/Disc Sander

Use both hands while sanding, sand towards the outer area of the disc for quick sanding.

Drum Sander

Used to sand down large pieces or finish multiple pieces of wood quickly.

Safety for Drum Sander

Roll up sleeves, tie hair back, wear hearing protection.

Definition of Engineering

Branch of science and technology concerned with the design, building, and use of engines, machines, and structures.

Aeronautical Engineering

Focus on the flight of vehicles operating under different speeds and altitudes.

Agricultural Engineering

All systems and sciences for the production and processing of agricultural products.

Automotive Engineering

Design, build, and operate self-propelled vehicles.

Chemical Engineering

Development and design of processes where materials undergo chemical changes during their manufacture.

Civil Engineering

Concerns communication, transportation, construction, and manufacturing.

Mechanical Engineering

Involves machines, production of power, and manufacturing methods.

Computer Software Engineering

Design, development, and maintenance of software systems and electronic devices.

Electrical Engineering

Application of electricity in systems and appliances.

Biomedical Engineering

Combines mechanical engineering with human anatomy and physiology.

Nuclear Engineering

Focuses on the use and management of nuclear technology.

Industrial Engineering

Produces manufacturing systems.