Lecture test 3

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/81

flashcard set

Earn XP

Description and Tags

Anatomy and physiology

82 Terms

1
New cards

What is the primary difference between the 2 subtypes of cartilaginous joints?

Synchondrosis joints are united by hyaline cartilage; Symphysis joints are united by fibrocartilage

2
New cards

Describe the walls and fluid in the cavity that surrounds synovial joint

The walls of the synovial cavity are the articular capsule, comprised of a fibrous connective tissue attached to each bone just outside the bone’s articulating surface. The lining of the inner surface of this capsule secretes synovial fluid, which is a thick slimy fluid that acts a lubricant to help reduce friction between the joints

3
New cards

What other feature reduces friction in synovial joints?

Articular cartilage covering the articulating surfaces

4
New cards

What are the functions of ligaments at a synovial joint?

Ligaments help support the joint by anchoring bones together and limit the range of motions

5
New cards

List and describe the classifications of ligaments found at synovial joints

Extrinsic ligaments are found outside the articular capsule

Intrinsic ligaments are fused to or incorporated into the wall of the articular capsule

Intracapsular ligaments are located inside of the articular capsule

6
New cards

Explain how muscle tendons support some synovial joints?

Tendons that act across the joint act as dynamic ligaments; the joint to help resist the forces and support the joint.

7
New cards

What are the types of fibrocartilage pads found between articulating bones?

Articular discs, Menisci (Meniscus)

8
New cards

What are the functions of these fibrocartilage pads?

Providing shock absorption and cushioning for joints, or smooth movements between articulating bones

9
New cards

What are bursae and what is the function of bursae?

Bursae are thin connective tissue sacs filled with lubricating fluid. The function of a bursa is to prevent 2 structures from rubbing against one another

10
New cards

What are 3 types of bursae and where are they found?

Subcutaneous bursae are found between skin and the underlying bone. Submuscular bursae are found between muscle and bone or between 2 muscles. Subtendinous bursae are located between tendon and bone.

11
New cards

The carpometacarpal joint is an example of what type of joint?

Saddle joint

12
New cards

An example of a plane joint is…

Acromioclavicular joint (between clavicle and acromion of

the scapula)

13
New cards

What is the functional classification of a plane joint? Why might the actual function be different?

Multiaxial diarthrosis. However in practice most are more restricted in their movements due to the ligaments present, which dramatically limit the directions of movement. There are some that can only move along a single plane as a result.

14
New cards

The shoulder is an example of what type of joint? What is the functional classification of this joint? What is another example of this type of joint?

Ball-and-socket joint

Multiaxial diarthrosis

Hip joint

15
New cards

Explain the process of circumduction, including the type of joints that utilize this movement.

The end of a joint moves in a circular motion, and this is created by a sequential combination of flexion, adduction, extension, and abduction of the joint.

16
New cards

Explain supination and pronation and what joint utilizes this movement

Supination and pronation are movements specific to the forearm with 2 joints there, the proximal and distal radioulnar joints. When you turn your forearm from anatomical position to where your palm faces posteriorly, this moves your forearm into the pronated position. In this position the radius and ulna cross over. This motion is produced by the rotation of the radius at the proximal radioulnar joint, accompanied by the movement of the radius at the distal radioulnar joint. This rotation is what causes the distal end of the radius to cross over the distal ulna at the distal radioulnar joint. Supination is the opposite motion, where the rotation of the radius returns the bones to their parallel positions and the palm of the hand is facing anteriorly, this is the supinated position.

17
New cards

Explain opposition and reposition and what joint utilizes these movement

Opposition is moving the tip (anterior surface) of the thumb to contact with the tip (anterior surface) of another digit. Returning the thumb to anatomical position is reposition. These movements are produced at the first carpometacarpal joint (a saddle joint)

18
New cards

What intrinsic ligaments thicken and strengthen the walls of the articular capsule in the shoulder?

Coracohumeral ligament, and 3 glenohumeral ligaments (superior, middle, and inferior)

19
New cards

What muscles form the rotator cuff?

Supraspinatus, Infraspinatus, Teres Minor, and Teres Major form the rotator cuff

20
New cards

What is the functional role of the rotator cuff?

The muscles of the rotator cuff act as dynamic ligaments to provide structural support for the shoulder joint (they adjust the strength of their contractions to resist forces acting on the shoulder)

21
New cards

What bursae are present in the shoulder joint and what is their function?

There are 2 bursae: subacromial bursa and subscapular bursa. Their role is to prevent friction between the rotator cuff muscle tendons and the scapula.

22
New cards

What is the largest joint in the body?

Knee joint

23
New cards

What are the articulations found in the knee joint?

There are 3 articulations, the femoropatellar joint between the femur and patella; the medial tibiofemoral joint between the medial femoral condyle and the medial tibial condyle; and the lateral tibiofemoral joint between the lateral femoral condyle and the lateral tibial condyle.

24
New cards

Explain what is occurring when the knee is in the locked position and why this occurs.

There is a very slight medial shift of the femur when the knee is in the fully extended locked position. The reason for this is that the lateral condyle of the femur is slightly smaller than the medial condyle, so when the knee fully extends the lateral condyle completes its rolling motion slightly before the medial condyle.

25
New cards

What bones articulate to form the talocrural joint, and what type of joint is this? What type of movements occur at this joint?

The distal tibia and distal fibula articulate with the superior talus. This is a hinge joint where dorsiflexion and plantar flexion occur.

26
New cards

What are the additional joints found in the ankle?

Subtalar joint, Calcaneocuboid joint, and Talonavicular joint

27
New cards

Explain how inversion and eversion occur in the ankle joint

These 3 plane joints all produce small movements, and the combination of all 3 contribute to the overall production of the inversion and eversion movements of the foot

28
New cards

What are the 3 muscle action classifications?

Agonist, Synergist, Antagonist

29
New cards

Describe parallel muscle fascicle arrangement, and include the 2 subtypes

Parallel muscles have fascicles arranged in the same direction as the long axis of the muscle.If the muscle is the same size throughout, it is a non-fusiform subtype. If the muscle is wider in the center (has a belly) and tapers at the ends, it is a fusiform subtype of parallel muscle.

30
New cards

What are the 3 subtypes of pennate fascicle arrangement?

Unipennate, Bipennate, Multipennate

31
New cards

Describe the 3 subtypes of pennate fascicle arrangemen

Unipennate have fascicles located on 1 side of the tendon.

Bipennate arrangements have fascicles located on both sides of the tendon.

Multipennate arrangements have fibers wrapping around the tendon

32
New cards

Where do muscles that cause facial expression originate? Where do they insert?

Originate on the surface of the cranium; and insert into connective tissue and the dermis of the skin.

33
New cards

What are the 6 muscles that move the eye?

Superior rectus, Inferior rectus, Lateral rectus, Medial rectus, Inferior oblique, Superior oblique

34
New cards

What muscles move the eye in a rotational direction?

Superior rectus, Inferior rectus, Inferior oblique, Superior oblique

35
New cards

What are the 4 extrinsic muscles of the tongue?

Genioglossus, Styloglossus, Palatoglossus, and Hypoglossus

36
New cards

What muscle allows you to stick out your tongue? Where does this muscle originate? Where does it insert?

Genioglossus, which originates on the mandible and inserts on the undersurface of the tongue

37
New cards

Explain how the diaphragm allows you to breathe

When the diaphragm contracts it flattens, this flattening increases the size of the thoracic cavity, which allows inhalation to occur. In addition to this increase in thoracic cavity volume, it pulls on the central tendon, which in turn pulls on the pleural membrane, increasing the size of the pleural cavity. The pleural cavity houses the lungs, and thus increasing the size of the pleural cavity increases the size of the lungs, which allows inhalation to occu

38
New cards

What are the 3 openings in the diaphragm?

Caval opening, Esophageal hiatus, Aortic hiatus

39
New cards

How many nuclei do skeletal muscle fibers have?

Multiple

40
New cards

What is the functional unit of skeletal muscle?

Sarcomere

41
New cards

What long structures are comprised of these functional units?

Myofibrils

42
New cards

What is the name of the region where neuronal axon and muscle meet?

Neuromuscular Junction (NMJ)

43
New cards

What is released when an electrical signal arrives at the axon terminal?

Acetylcholine (ACh)

44
New cards

What occurs when the released product from the axon terminal arrives at the motor end plate?

Acetylcholine will bind to receptors on the motor end plate, and those receptors will open and allow sodium ions (Na+) to travel into the cell; which means the motor end plate becomes depolarized as positively charged ions are entering.

45
New cards

Why is removal of the signal released by the axon terminal important?

This allows for discrete signaling; meaning that there is a clear beginning and end to a signal.

46
New cards

How is the signal released by the axon terminal removed?

Degraded by the enzyme Acetylcholinesterase (AChE)

47
New cards

Briefly explain how depolarization spreads in a skeletal muscle fiber.

Acetylcholine binds to receptors on the motor end plate, which open when it binds and allow sodium ions to rush Into the muscle fiber. This entry of positive charge makes it so more positively charged sodium ions can enter the cell. This positive charge will spread across the entire plasma membrane (sarcolemma). It will also dive deeper into the muscle fiber as the positive charge will travel down T-tubules (that act as a highway for charge deep into the center of the cell).

48
New cards

What does the depolarization of skeletal muscle fiber cause to be released? What releases this?

Calcium ions are released by the sarcoplasmic reticulum (smooth endoplasmic reticulum).

49
New cards

Briefly explain all the things that occur when stopping a skeletal muscle contraction.

The acetylcholine signal has been removed by the degradation enzyme acetylcholinesterase. With no more active signal the muscle fiber is no longer depolarized, which means no more positively charged sodium ions are entering. The muscle fiber returns to its electrical resting state (resting membrane potential). The slowest portion of this process is then removing calcium ions from the sarcoplasm (cytoplasm). We have to spend energy in the form of ATP to actively pump calcium ions back into the sarcoplasmic reticulum (smooth ER). Once calcium has been removed, we no longer have interaction between thick and thin filaments (between myosin and actin).

50
New cards

What are all the components of thin filaments?

There are 3 key components: an actin backbone, tropomyosin fibers wrapped around actin (in the resting state these block the myosin binding sites on actin preventing the interaction between myosin and actin), and the troponin enzyme.

51
New cards

What are all the components of thick filaments?

Myosin fibers with large myosin heads capable of binding to actin and to ATP

52
New cards

Explain the process that allows thick and thin filaments to interact (what allows them to and how)?

When calcium enters the sarcoplasm, it binds to troponin and activates it. Once activated troponin moves tropomyosin; moving tropomyosin reveals (opens up) the myosin binding sites on actin filaments. This allows myosin and actin to interact, and thus for the cross bridge cycle to occur (and therefore contraction).

53
New cards

When thick and thin filaments are able to interact, do they move, and if so how?

Thick and thin filaments slide past one another to shorten the sarcomere; actin is pulled from either side towards the center (from Z-disc toward H-zone).

54
New cards

Please explain all of the steps of the cross bridge cycle.

With calcium present the crossbridge cycle can occur. The first step is the myosin head binding to actin. When it binds it will also have adenosine diphosphate (ADP) and a phosphate group bound to it. This is the actual cross bridge. The second step starts with the myosin head dropping the phosphate group, then pulling the thin filament towards the center of the sarcomere. This action is called the power stroke. When the power stroke has finished the myosin head will then drop the ADP molecule (the head will be stuck in this position without additional ATP). For the third step ATP will bind to the myosin head. This causes the myosin head to detach from the actin filament. During the last step ATP is hydrolyzed (meaning it is broken down into ADP and a phosphate group) by the myosin head (the myosin ATPase portion of the head), the ADP and phosphate group remain bound and the energy released by this breakage is used to cock the myosin head (it functions like a compressed spring). If calcium is present, the cycle can continue.

55
New cards

What is the source of energy used by skeletal muscle fibers?

Adenosine triphosphate (ATP)

56
New cards

What is the first process used to generate our energy source (that is unique to skeletal muscle fibers), and how does this allow for the energy source to be generated.

Creatine phosphate is ourrapid method for generating ATP. It donates a phosphate group which is bound to ADP. There is only a limited supply (about 15 seconds worth).

57
New cards

Briefly explain the process of glycolysis.

Glycolysis occurs in the cytoplasm of every cell. It is a series of enzymatic reactions (10 reactions in total), and it converts glucose into 2 pyruvic acid molecules and generates 2 ATP molecules while doing so. The glucose can be taken from the blood or can be broken down from the glycogen stores (glycogen is a long chain of glucose molecules bound together).

58
New cards

What does glycolysis yield?

It yields 2 ATP molecules and 2 pyruvic acid molecules (also called pyruvate)

59
New cards

If no oxygen is present, can we continue to generate energy through glycolysis? If so, how?

We can continue to generate energy, but we will run out of the coenzyme NAD. The role of NAD is to carry hydrogen ions to another pathway that requires oxygen. So without oxygen we will run out of free NAD. But we can get usable NAD by donating the hydrogen ion to pyruvic acid; this converts pyruvic acid into lactic acid. This allows us to continue generating energy via glycolysis. However, we begin to accumulate lactic acid, which means this process cannot continue for very long (we can generate ATP for about a minute).

60
New cards

If oxygen is present, what occurs after glycolysis? Where does this occur?

If oxygen is present, then the 2 pyruvic acid molecules will enter into the full cellular respiration pathway or aerobic respiration. This process occurs in the mitochondria. This is a long series of enzymatic reactions (17 in total) that yield a total of 34 ATP molecules. To do so, we actually utilize a bunch of coenzymes (like NAD) that carry hydrogen to the later steps in this pathway. We also add hydrogen to coenzymes in the mitochondria as well.

61
New cards

What is required for this longer energy generation process? What waste products are produced?

The full cellular respiration (aerobic respiration) pathway requires oxygen to occur. As mentioned above, we create 34 ATP molecules during it. We also generate carbon dioxide (CO2), water (H2O), and heat as waste products.

62
New cards

Is there an additional way skeletal muscle fibers can store oxygen?

Muscle fibers are able to store extra oxygen on myoglobin.

63
New cards

Explain the concept of oxygen debt (or oxygen deficit).

If we keep working muscles, eventually we won’t be able to keep up with the oxygen demand (supply will be lower). This iswhen fatigue will begin to set in, and we’ll soon no longer be able to perform aerobic respiration and have to resort to only glycolysis, which can only occur for a short period of time. But once we stop these strenuous contractions we will need to make up the oxygen debt. We continue to breath heavily to get oxygen to our muscles. This oxygen is needed to .restore ATP levels, restore creatine phosphate levels, and to convert lactic acid back to pyruvic acid. Once all of this is finished, then the body has paid off its oxygen debt.

64
New cards

Explain what a motor unit is.

The group of muscle fibers that receive input from (innervated by) the same motor neuron are called a motor unit.

65
New cards

Explain the principle of recruitment as it relates to motor units and skeletal muscle.

In recruitment the smallest motor units are recruited (activated) first to attempt to perform the job. We recruit more motor units as necessary, as the underlying rationale for recruitment is all about efficiency. We want to use as few muscle fibers as possible for the job.

66
New cards

Describe the concept of optimal length, including why this it exists.

Optimal length is the length tension relationship that exists. There is a limited range of sarcomere lengths where the sarcomere can generate the maximum amount of force possible. In this limited range every myosin head is able to bind to actin and move it toward the center of the sarcomere. As we stretch or compress, we have myosin heads that are either unable to move anything (compressed) or unable to make contact with actin (stretched).

67
New cards

What is the name of a single contraction?

Muscle twitch

68
New cards

Please name and explain the 3 phases of a single contraction.

The first phase is the latent period, where the action potential is being propagated (moved) along the plasma membrane (sarcolemma), and is triggering the release of calcium ions from the sarcoplasmic reticulum (smooth endoplasmic reticulum). The second phase is the contraction phase when calcium has started to bind to troponin, which in turn moves tropomyosin, to allow myosin heads and actin to interact and the cross bridge cycle to occur. Sarcomeres are shortened and force is generated (tension is increased). The third phase is the relaxation phase, where the removal of calcium occurs. This is a slow process where calcium is pumped back into the sarcoplasmic reticulum, but ATP must be used to do so. Once all of the calcium has been removed the fiber is now in the resting state.

69
New cards

When a second neuronal action potential arrives before the skeletal muscle fiber has relaxed, what is this process called?

Summation

70
New cards

What is happening inside of the muscle fiber when the second neuronal action potential arrives?

There are still active cross bridge cycling occurring because calcium is still present, so when the second action potential arrives more calcium is added to the sarcoplasm, which allows for increased force production by the muscle.

71
New cards

What are the 2 categories of muscle fibers that differ in energy generation?

Oxidative; Glycolytic

72
New cards

What are the 2 categories of muscle fibers that differ in myosin ATPase speed?

Fast; Slow

73
New cards

What are the 3 types of muscle fibers?

Slow oxidative; Fast oxidative; Fast glycolytic

74
New cards

Please compare and contrast the 3 types of muscle fibers.

Slow oxidative fibers contract slowest and have the lowest force generation capacity, but are also the most resistant to fatigue; typically used in postural control. Fast oxidative fibers contract quickly and have some fatigue resistance (intermediate) and have intermediate force generation; typically used in general movements. Fast glycolytic fibers contract quickly but also fatigue very quickly, and can generate the most force; they are used in explosive movements.

75
New cards

What is the response of muscle to endurance training?

This stimulates angiogenesis (expanding blood vessel capillary beds), increase the number of mitochondria in cells, and increase the amount of myoglobin. We can convert some fast glycolytic to fast oxidative fibers. The overview is that we’re increasing the oxidative capacity of muscle fibers.

76
New cards

What are intercalated discs and what do they possess?

These connect cardiac muscle fibers and contain the adhesion proteins desmosomes (to tether cells together) and gap junctions (small pores that allow ions to pass from cell to cell).

77
New cards

What causes electrical excitation in cardiac muscle fibers?

Cardiac pacemaker cells that are autorhythmic. When these are excited (as they cycle through regularly), their electrical signal travels from cardiac muscle fiber to fiber through gap junctions (in the intercalated discs).

78
New cards

How are cardiac muscle fiber action potentials different than those found in skeletal muscles?

Cardiac action potentials have a long plateau phase that is driven by calcium ions. This makes the cardiac action potential as long as the cardiac muscle contraction (twitch), which has the benefit of preventing any summation from occurring (which we do not want in the heart).

79
New cards

What is the role of calcium in smooth muscle fiber contractions? Explain the details, including the primary source of calcium.

Calcium triggers smooth muscle fiber contractions, but by activating the protein calmodulin. The activated calcium-calmodulin complex in turn activates the enzyme myosin light-chain kinase (MLCK). MLCK adds a phosphate group to myosin headswhich allows the cross bridge cycle to occur. Calcium is primarily supplied by the extracellular fluid.

80
New cards

How are smooth muscle fibers able to remain partially contracted without expending energy? What is the name of the partially contracted state?

Smooth muscle is able to remain partially contracted due to latch bridges. This partially contracted state is smooth muscle tone.

81
New cards

What are the 2 types of smooth muscle fibers?

Single-unit and Multiunit smooth muscle

82
New cards

Please compare and contrast the 2 types of smooth muscle fibers.

Single-unit smooth muscle is electrically connected by gap junctions. These are found in the walls of visceral organs . Single-unit smooth muscle will exhibit the stress-relaxation response to stretching. A single signal can cause a contraction in all of the connected smooth muscle. Multiunit smooth muscle possesses individual fibers that are not electrically connected, they do not possess gap junctions. They also do not respond to stretch. They are found lining blood vessels and respiratory airways. To get them to contract we need to release signals to activate each individually.