Practice questions for OK Roofing Contractor

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/98

encourage image

There's no tags or description

Looks like no tags are added yet.

99 Terms

1
New cards

What is a quantity takeoff in roofing estimation?

The process of measuring and calculating all material quantities needed from the plans

2
New cards

What is the minimum distance a hot asphalt kettle must be kept from a building?

20 ft

3
New cards

What is the time limit for the Oklahoma business and law exam for roofing contractors

120 minutes

4
New cards

At what height does OSHA require fall protection for roofing work

6 ft

5
New cards

What does ‘ponding’ mean on a commercial roof?

Water standing for more than 48 hours after precipitation stops

6
New cards

What waste factor should typically be included when estimating roofing membrane for a commercial project?

5-10%

7
New cards

What type of bond guarantees that subcontractor and material suppliers will be paid?

Payment bond

8
New cards

What is the typical solar reflective index (SRI) requirement for a cool roof?

SRI 78 or higher

9
New cards

What is the main risk to a contractor using a fixed-price (lump sum) contract?

Actual cost my exceed the estimated cost, reducing or eliminating profit

10
New cards

What is the standard number of plies in a commercial built-up roof system?

4 plies

11
New cards

What is the primary consideration when bidding a commercial reroofing project?


Accurately estimating all costs including labor, materials, equipment, overhead, and profit

12
New cards

What is the passing score for the Oklahoma roofing contractor exams?

70%

13
New cards

What is the purpose of a cant strip at a wall-to-roof junction on a low-slope roof?

To create a gradual transition avoiding sharp 90-degree bends in the membrane

14
New cards

What is the standard edge detail for terminating a single-ply membrane at a roof edge without a parapet?

Metal edge detail with membrane adhered to the vertical and horizontal faces of the metal

15
New cards

What is standing seam metal roofing?

Metal panels joined by raised interlocking seams with concealed fasteners

16
New cards

What is the primary purpose of a safety meeting (toolbox talk) on a roofing jobsite?

To communicate specific hazards and safe work practices for the day’s activities

17
New cards

What is a Safety Data Sheet (SDS) and when must it be available?

A document detailing chemical hazards, handling, and emergency procedures that must be accessible to workers at all times

18
New cards

What is the standard method for measuring the thickness of a liquid-applied roof coating?

Wet-film thickness gauge during application and dry-film thickness gauge after curing

19
New cards

What is the primary component of a built-up roofing (BUR) system?

Alternating layers of reinforcing felt and hot bitumen

20
New cards

What is the purpose of a termination bar in commercial roofing?

To mechanically secure the membrane to vertical surface at the top of base flashing

21
New cards

When is a moisture survey recommended before reroofing a commercial building?

Before any recover or overlay to determine wet insulation locations

22
New cards

What is a punch list in commercial construction?

A list of incomplete or deficient items that must be corrected before final acceptance and payment

23
New cards

What is the purpose of a coping on a parapet wall?

To cap the top of the wall and shed water away from the wall face

24
New cards

What is a roof curb used for in commercial roofing?

To provide a raised frame for mounting HVAC units, skylights, and other equipment on the roof

25
New cards

What is the typical labor productivity rate for installing a commercial single-ply membrane system?

10-20 squares per day crew

26
New cards

What information must be included in an Oklahoma preliminary lien notice?

The claimant’s property description, and nature/value of work performed or materials furnished

27
New cards

What is the primary advantage of a ballasted single-ply roofing system?

No fastener penetrations in the membrane, with stone ballast providing wind uplift resistance

28
New cards

What is 'float' or 'slack' in a project schedule?

The amount of time an activity can be delayed without affecting the project completion date

29
New cards

What is the exam fee for each Oklahoma commercial roofing contractor PSI exam?

$92

30
New cards

What is the deadline for filing a mechanics lien in Oklahoma?

90 days after last work performed

31
New cards

What is the time limit for the Oklahoma commercial roofing trade exam?

150 minutes

32
New cards

What is the purpose of tapered insulation on a commercial roof?

To create slope for positive drainage toward roof drains or scuppers

33
New cards

How many separate exams must an Oklahoma commercial roofing contractor pass?

2 (trade exam and business and law exam)

34
New cards

What is the minimum sidelap for modified bitumen membrane sheets?

6 inches

35
New cards

What wind speed design criteria applies to most of Oklahoma per the IBC/ASCE 7?

105-115 mph basic wind speed

36
New cards

What is the primary purpose of a roof drain sump?

To create a law point that directs water into the drain and prevents ponding around the drain

37
New cards

What is the primary advantage of TPO (thermoplastic polyolefin) membrane over EPDM?

Heat-welded seams that are stronger than the membrane itself

38
New cards

What is the purpose of the flood coat in a BUR system?

To provide a thick final layer of bitumen for embedding aggregate surfacing

39
New cards

What is the primary concern when performing a tear-off of an existing commercial roof?

Protecting the building interior from water intrusion during the process

40
New cards

What is the minimum compressive strength required for commercial roof insulation?

20 psi

41
New cards

What is a change order in construction?

A written agreement to modify the scope, price, or schedule of the original contract

42
New cards

What is the critical path method (CPM) in project management?

A scheduling technique that identifies the longest sequence of dependent activities determining project duration

43
New cards

What is indirect cost (overhead) in a roofing estimate?

Business expenses not directly tied to a specific project (office, vehicles, insurance, admi)

44
New cards

What is the R-value per inch of polyisocyanurate (polyiso) roof insulation?

R-5.7 per inch

45
New cards

What is a mechanics lien?

A legal claim against property by a contractor or supplier who has not been paid for work or materials

46
New cards

Where should expansion joint be placed on a commercial roof?

Where the building structure changes height, direction, or where wings meet

47
New cards

What is the standard seam overlap width for TPO membrane?


6 inches

48
New cards

What is a roofing warranty inspection?

A periodic inspection required to maintain the manufacture’s warranty

49
New cards

What is the minimum height the roofing membrane must extend up a wall on a commercial low-slope roof?

8 inches

50
New cards

What does OSHA require employers to provide for heat illness prevention on roofing jobsites?

Access to water, shade, and rest breaks with a hear illness prevention plan

51
New cards

What is the standard method for attaching roofing membrane at a roof drain?

Clamp the membrane between the drain body and a clamping ring

52
New cards

What is the typical thermal expansion rate for a 40-foot aluminum standing seam panel with a 100°F temperature change?

Approximately ¾ inch

53
New cards

What is the purpose of overflow drainage on a commercial roof?

To prevent structural overload if primary drains become clogged

54
New cards

What is the difference between a lump sum and a unit price contract?

Lump sum is a fixed total price; unit price pays based on measured quantities of work completed

55
New cards

What is a scupper on a commercial building?

An opening in a parapet wall or raised roof edge that allows water to drain off the roof

56
New cards

What is the maximum free-fall distance permitted by OSHA when using a personal fall arrest system?

6 feet

57
New cards

What is the typical warranty period for a commercial single-ply membrane roof system?

15-25 years

58
New cards

What is the minimum recommended slope for standing seam metal roofing?

1/4:12

59
New cards

What is the energy code requirement for roof insulation in Oklahoma (Climate Zone 3A/4A)?

R-25 to R-30 minimum (depending on zone)

60
New cards

What type of insurance protects a roofing contractor against claims for property damage or bodily injury caused by their work?

Commerical general liability (CGL)

61
New cards

What PPE is required when working with hot asphalt in built-up roofing?

Long sleeves, heat-resistant gloves, face shield

62
New cards
63
New cards

How far must a ladder extend above the roof edge for safe access?

3 feet

64
New cards

What document defines the scope of work, materials, and quality standards for a commercial roofing project?

The project specifications

65
New cards

What is retainage in a construction contract?

A percentaage of each payment withheld by the owner until project completion

66
New cards

Are the Oklahoma commercial roofing exams open-book or closed-book?

Open-book with PSI-approved references

67
New cards

What is the proper overlap for a metal roof ridge cap?

6 inches

68
New cards

What is the purpose of a cover board in a commercial roof assembly?

To protect the insulation from damage during membrane installation and provide a smooth substrate

69
New cards

What is an air barrier in a commercial building envelope?

A continuous material system that prevents uncontrolled air leakage through the building envelope

70
New cards

What is the purpose of a clip in a standing seam metal roof system?

To attach the panel to the structure while allowing thermal movemnts

71
New cards

What is a roof core sample used for?

Evaluating the condition and composition of existing roof layers, insulation, and dec

72
New cards

What attachment method uses plates and screws to secure a single-ply membrane to the roof deck?

Mechanically attached

73
New cards

What is the maximum number of existing roofing layers allowed before complete tear-off per the IBC?

2 layers

74
New cards

What is the purpose of an expansion joint on a commercial roof?

To allow controlled movement between different sections of the roof structure

75
New cards

On which side of the insulation should a vapor retarder be installed in Oklahoma's climate?

Below the insulation (warm/interior side)

76
New cards

What type of metal is commonly used for through-wall flashing in commercial roofing?

Stainless steel or copper

77
New cards

What FM rating classifies roof assemblies for wind uplift resistance?

All of the above (Fm ratings use 1-XX increments) FM 1-30, FM 1-60, FM 1-90

78
New cards

What are the two types of bitumen used in built-up roofing?

Asphalt and coal tar pitch

79
New cards

What is the Oklahoma requirement for displaying a contractor's license number?

The license number must be included in all advertising and on vehicles used in the trade

80
New cards

What is the OSHA-required guardrail height for roofing work?

39-45 inches

81
New cards

What type of bond guarantees that a contractor will complete the project per the contract terms?

Performance bond

82
New cards

What is the difference between gross profit and net profit?

Gross profit is revenue minus direct costs; net profit is gross profit minus overhead and all other expenses

83
New cards

What OSHA standard applies to confined space entry on a roofing project?

29 CFR 1926.1200 (Subpart AA)

84
New cards

What is the typical unit of measure for estimating roofing work?

Roofing square (100 sq ft)

85
New cards

What is the proper method for patching a hole in a TPO membrane

Weld a TPO patch over the damaged area with rounded corners using a hot-air welder

86
New cards

What is the minimum recommended height for a metal edge flashing (gravel stop) on a low-slope roof?

4 inches

87
New cards

What is the primary concern with Oklahoma's severe weather for commercial roofing?

Hail damage, high winds, and tornado threats

88
New cards

What is the purpose of a submittal in the construction process?

To provide the architect/owner with product data, samples, and shop drawings for approval before installation

89
New cards

What is the most common cause of commercial roof leaks?

Flashing failures at penetrations, edges, and transitions

90
New cards

What is modified bitumen roofing?

Asphalt modified with polymer additives (SBS or APP) applied in sheet form

91
New cards

What is a cool roof in commercial roofing?

A highly reflective and emissive roof surface that reduces heat absorption and cooling costs

92
New cards

What does workers' compensation insurance cover?

Medical expenses and lost wages for employees injured on the job

93
New cards

What Oklahoma agency administers the commercial roofing contractor license?

Oklahoma Construction industries Board (CIB)

94
New cards

What is spray polyurethane foam (SPF) roofing?

A liquid mixture sprayed on the roof that expands and cures into a seamless insulation and waterproofing system

95
New cards

What type of fire extinguisher must be readily available during hot asphalt roofing operations?

Class ABC multipurpose dry chemical

96
New cards

How many questions are on the Oklahoma commercial roofing trade exam?

50 questions

97
New cards

What OSHA standard specifically addresses roofing work safety?

29 CFR 1926.501 (b)(10)

98
New cards

What is a vapor retarder in a commercial roof assembly?

A material that restricts the passage of water vapor through the roof assembly

99
New cards

What is the difference between SBS and APP modified bitumen?

SBS has rubber-like flexibility; APP has plastic-like heat resistance