Professional Plaque Removal Lecture Notes

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/48

flashcard set

Earn XP

Description and Tags

Comprehensive practice flashcards in question-and-answer format covering definitions, effects, contraindications, abrasive principles, disclosing techniques, armamentarium, clinical steps, and procedure modifications for professional plaque removal.

49 Terms

1
New cards

How is abrasion defined in professional plaque removal?

The wearing away of a surface through the frictional forces of cutting or scratching.

2
New cards

What is an abrasive?

A material composed of particles of sufficient hardness and sharpness to cut or scratch a softer material when drawn across its surface, where each point or edge acts as an individual cutting blade.

3
New cards

How is polishing defined?

The production of a smooth, glossy, mirror-like tooth surface that reflects light evenly, using a fine abrasive.

4
New cards

What is frictional heat?

Heat produced during the process of abrasion.

5
New cards

What is selective polishing?

Evaluating the individual and determining if and where any engine polishing is needed.

6
New cards

What are the potential systemic and environmental effects of polishing?

Systemically, it can cause bacteremia; environmentally, it produces aerosols and splatter.

7
New cards

What are the adverse effects of polishing on teeth?

Removal of tooth structure, removal of the fluoride-rich surface, and heat production.

8
New cards

What are the effects of polishing on the gingiva?

Crevicular epithelium removal, irritation from embedded prophy paste particles and bacteria, and a potential increase in healing time.

9
New cards

What are the primary indications for polishing during a prophylaxis?

To remove extrinsic stains remaining after scaling, to prepare teeth for caries preventive agents (topical fluoride and sealants), to create a smooth tooth surface, and to polish amalgams.

10
New cards

Why is it important to create a smooth surface through polishing?

To resist microbial attachment, aid in patient home care results, and increase patient motivation.

11
New cards

What are the four contraindications for polishing?

Severely exposed dentin, active decalcification, an unpremedicated patient requiring premedication, and gold cast restorations.

12
New cards

How do particle shape and size affect the rate of abrasion?

Irregularly shaped particles wear down surfaces faster than rounded particles; large particles are more abrasive, whereas smaller particles are less abrasive and produce a glossier finish.

13
New cards

What physical characteristics should be chosen in an abrasive agent to keep abrasion at a minimum?

Rounded particles with dull edges, smaller/finer particles, and decreased hardness.

14
New cards

What three factors influence the rate of abrasion during polishing?

Quantity applied, speed of application, and pressure applied.

15
New cards

How do wet abrasive particles differ from dry particles regarding abrasion and heat generation?

Wet particles act as a lubricant to reduce frictional heat, while dry particles have the greatest applied quantity, fastest abrasive rate, and greatest production of frictional heat.

16
New cards

What clinical practices should be followed to minimize abrasion and frictional heat?

Use wet particles, light pressure, and low speed.

17
New cards

What is pumice flour or super fine pumice indicated for in dental hygiene?

Stain removal.

18
New cards

What is tin oxide and how is it characterized in clinical polishing?

An older polishing agent for teeth and metallic (gold) restorations that is not commonly used anymore.

19
New cards

What form does emery take when used as an abrasive agent?

Polishing strips or disks.

20
New cards

What are the two main reasons for using wet abrasives?

To make the abrasive transportable and to decrease frictional heat.

21
New cards

What is the guideline for using fluoride-containing prophylaxis paste before sealant placement?

Do not use fluoride-containing paste prior to sealant placement in the same appointment; use fluoride paste for all other patients unless refused.

22
New cards

What clinical alternative can be used if a pediatric patient refuses prophylaxis paste?

Children's toothpaste.

23
New cards

What is the active ingredient in disclosing agents used in the clinic?

Erythrocin dye.

24
New cards

What are the clinical purposes of using a disclosing agent when polishing?

To illustrate remaining plaque after debridement, aid in selective polishing, and serve as an evaluation tool for the clinic instructor.

25
New cards

What is the technique for applying disclosing solution?

Apply with a cotton applicator, irrigate with water, and inspect after applying compressed air.

26
New cards

What is the technique for using disclosing tablets?

Have the patient chew the tablet, swish for 30–60 seconds30\text{--}60\,\text{seconds}, and rinse.

27
New cards

What items constitute the armamentarium for the polishing procedure?

Handpiece, prophylaxis angle (right angle/contra angle), polishing attachments (latex-free rubber cup and bristle brushes), polishing agent, disclosing solution with cotton tip applicator or sterile gauze, dental floss or tape, and a saliva ejector.

28
New cards

What are the proper grasp and handpiece support techniques for polishing?

Use a modified pen grasp with firm grasp pressure for support, supporting the handpiece in the V of the thumb and index finger.

29
New cards

What speed settings should be utilized when adapting the rubber cup to the tooth?

Use the lowest speed (8,000–12,000 psi8,000\text{--}12,000\,\text{psi}), not to exceed 20,000 psi20,000\,\text{psi}.

30
New cards

What is the proper working stroke when applying a rubber polishing cup to the tooth surface?

Pat the tooth surface with light press/release pressure for only 1–2 seconds1\text{--}2\,\text{seconds}, treating only surfaces that require polishing.

31
New cards

What is the complete sequence of procedures during professional polishing?

  1. Apply disclosing solution; 2. Use an efficient sequence throughout the mouth; 3. Polish accessible surfaces with the rubber cup; 4. Irrigate thoroughly; 5. Use dental floss interproximally; 6. Check with disclosing solution and repolish if needed; 7. Irrigate thoroughly.


32
New cards

Why must safety glasses be worn by both the patient and operator during polishing?

To protect their eyes from airborne particles.

33
New cards

How should the polishing procedure be altered in the presence of gold restorative materials?

Brush with the patient's toothbrush to remove visible plaque; if the gold is tarnished or stained, polish with fine pumice.

34
New cards

How should the clinician alter the procedure when polishing mobile teeth with exposed dentin root surfaces?

Debride thoroughly, remove plaque with brush/floss during instruction, stabilize the tooth with the non-dominant index finger, and polish with fine or medium grit pumice using light pressure on the root and normal pressure on enamel.

35
New cards

What procedure modification is required for exposed dentin or decalcified tooth surfaces?

Gently debride with the patient's toothbrush and administer a fluoride treatment to strengthen the area.

36
New cards

How should patients with high-risk medical histories (e.g., Hepatitis B/C, AIDS, heart murmur) be managed for polishing?

Premedicate patients who require it, and polish as normally done using universal precautions.

37
New cards

What should patients be taught regarding dental office polishing agents versus home products?

Polishing agents used in the dental office are too abrasive for routine daily home use.

38
New cards

Bacteremia definition

Bacteria in the bloodstream due to an invasive procedure

39
New cards

What is the effects polishing has on ginigva

Cervical epithelium removal. Irritation from embedded prophy paste particles and bacteria. May increase healing time

40
New cards

Speed of application definition

The greater the speed of application, the greater the rate of abrasion.

41
New cards

Why is wet abrasive used?

To make the abrasive transportable. To decrease frictional heat

42
New cards

What are ways you can prepare abrasive?

Mix water or mouthwash with an abrasive agent in a dappen dish.

43
New cards

When applying a working stroke while polishing, what other elements should be taken into consideration?

Pat the tooth surface with light press/release pressure. Apply to the tooth surface for only one to two seconds. Polish only surfaces that need polishing

44
New cards

What types of conditions can alter polishing procedures?

the type of stain present, gold restorations, exposed dentin with mobile teeth, decalcified tooth surface, persons with high risk MHDX,

45
New cards

Why can a patient with a systemic condition be at high risk of getting a polishing procedure due to MHDX?

Hepatitis 8 or C, AIDS, heart murmur, replacement joints or parts, open heart surgery, kidney dialysis, immunosuppressed diseases, asthma.

46
New cards

What is an alter procedure for patient with high risk MHDX

Premedicate patients who need it. Polish as normally done using universal precautions

47
New cards

What is an alter procedure for patient with exposed dentin ir decalficed teeth

Gently debride with the patient’s toothbrush. Give a fluoride treatment to strengthen the area

48
New cards

What is an alter procedure for patient with tooth mobility

Thoroughly debride.

Thoroughly remove plaque with a brush and floss during patient education.

Stabilize the tooth with the index finger of the non-dominant hand while polishing. Polish with fine or medium grit pumice and light pressure on the root, normal pressure on the enamel.

49
New cards

What is an alter procedure for patient with gold restorations

Brush with the patient’s toothbrush to remove visible plaque. If gold is tarnished or stained (rare),' polish with fine pumice.