1/10
Looks like no tags are added yet.
Drag
A frictional force that opposes the motion of an object whilst moving through a liquid
Factors affecting magnitude of Drag Force, starting with 2 most significant
Speed of object, Cross sectional area of object, Shape of object, Texture of object, Density of fluid
Relationship between Drag ‘Force and speed
Drag is directly proportional to speed2
Terminal Velocity
The constant maximum velocity reached by a falling object when the force of its weight downwards equals the upward drag force, making the resultant force zero and the acceleration zero.
Describe what happens to the forces, resultant force, and acceleration of a falling object from release until it reaches terminal velocity.
When t = 0 there’s no drag force acting on the object, so the only force acting on it is weight, therefore the acceleration is equal to the acceleration of free fall (9.81 m s-2)
As velocity increases during free fall, the drag force increases.
Weight remains constant.
The net force (weight - drag) decreases, so acceleration decreases.
When drag equals weight, the net force becomes 0, acceleration becomes 0, and the object continues falling at a constant terminal velocity
Describe the basic setup used to determine the terminal velocity of a ball bearing experimentally.
Fill a tall measuring cylinder or tube with a high-viscosity liquid (e.g., glycerol, heavy oil, or washing-up liquid).
Release a steel ball bearing from rest just at or above the liquid surface.
In the standard cylinder experiment, how do you know when the ball bearing has reached terminal velocity
When the ball bearing travels equal distances in equal time intervals (or takes equal time to pass evenly spaced marks, like rubber bands on the tube). At this point, the velocity is constant.
How can you use the obtained distance and time data to graphically determine the terminal velocity?
Calculate the average velocity for each consecutive interval and plot a velocity-time graph. The curve will rise during the initial acceleration phase and flatten out into a horizontal line; the value of this flat line is the terminal velocity.
How can a pulley system and a ticker timer be integrated into this experiment to increase measurement accuracy?
Set up a pulley over the fluid cylinder.
Attach the ball bearing to one end of a string over the pulley and a strip of paper tape to the other.
Pass the tape through a ticker timer, which punches dots at a precise, fixed frequency as the ball falls.
If a ticker timer produces 50 dots per second, how do you calculate the terminal velocity from the paper tape?
50 dots per second means the time interval between consecutive dots is exactly 0.02 seconds (1 / 50). Once the distance between successive dots becomes perfectly constant, measure that distance (s) and calculate the velocity using: velocity = distance (s) / time
Aside from a ticker timer, what technique can be used to capture rapid displacement data accurately to avoid human reaction time errors?
Film the ball’s motion in slow motion using a mobile phone or camera placed next to a vertical metre ruler. Analyze the playback frame-by-frame to accurately match time stamps to the ball's position.