DSG325-Mold Channels and Analysis and Overmolding and Insert molding

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/11

flashcard set

Earn XP

Description and Tags

Lectures 13 and 14

12 Terms

1
New cards

what is a sprue?

first passageway of the melt from the nozzle of the injection unit and the front half of the mold. Has several runners connecting

2
New cards

what are runners?

distributes molten plastic to mold cavity

3
New cards

what do gates do?

directs flow from runner into mold cavity, located at end of each runner

4
New cards

What are air vents?

allows a path for trapped gasses to escape, allowing for full mold fill

5
New cards

what are ejector pins?

  • responsible for releasing part from mold

  • large flat land point preferred

  • larger pin diameter - ejection forced distributed over larger area, less penetration into part

  • may need to add extra platform if no substantial area exists. may push off runners


6
New cards

what is overmolding

two step molding process to form a plastic substrate and secondary material around substrate

  • two tone plastic

  • plastic substrate, silicone outer layer

  • plastic substrate, integrated into over molded gasket


7
New cards

what is insert molding?

similar two-step process but the substrate is a previously existing part (often metal)

8
New cards

What is the workflow to make molds in solidworks using the tools provided?

  • parting line

  • shut off surfaces - only needed if there are holes or other shut off features

  • parting surface

  • tooling split


9
New cards

If the solidworks mold tools don’t work is there another way to achieve the same thing?

yes, you must create the surfaces manually and use intersect to create the tooling split

10
New cards

What is a tooling split with interlock?

step along parting plane, acts like a built in keying feature

outer perimeter of parting surface can fall within mold perimeter

11
New cards

What is the process for making a core/side action feature?

  • create tooling split as usual

  • create sketch on outside of tool that defines the outer perimeter of the side action

  • in core feature properties manager, select sketch, pull direction reference, tool body to cut side action from


12
New cards

How are long skinny ribs made in real life?

sinker EDM tools - very costly