1/20
Flashcards covering two-dimensional vectors, graphical and algebraic vector addition, resolving components, and static and kinetic friction principles and calculations.
What is the primary difference between a scalar quantity and a vector quantity?
A scalar quantity has only magnitude, whereas a vector quantity has both magnitude and direction.
How does distance differ from displacement?
Distance is a scalar that measures the total length of the path traveled, whereas displacement is a vector that measures the straight-line change in position from start to end.

According to the Cartesian coordinate system, which compass directions correspond to each positive and negative axis?
+x corresponds to East, āx corresponds to West, +y corresponds to North, and āy corresponds to South.

How is the resultant vector R drawn when using the graphical head-to-tail method?
The resultant vector R is drawn from the tail of the first vector to the head of the last vector, representing the combined effect of the vectors.
What equations are used to calculate the magnitude and direction angle (Īø) of the resultant vector for perpendicular components?
Magnitude: R=Rx2ā+Ry2āā Direction angle: Īø=tanā1(RxāRyāā)

What is the process of breaking an angled vector down into its perpendicular horizontal and vertical components called?
Resolving a vector into components.
When angle Īø is measured counterclockwise from the positive x-axis, what formulas calculate the horizontal (Axā) and vertical (Ayā) components of vector A?
Axā=Acos(Īø) and Ayā=Asin(Īø)

In the coordinate system shown, what are the signs of Axā, Ayā, and tan(Īø) in the second quadrant (90ā<Īø<180ā)?
Axā is negative, Ayā is positive, and tan(Īø) is negative.
For a vector with magnitude A=5.0N at an angle of Īø=130ā, what are the calculated components Axā and Ayā?
Axā=(5.0N)cos(130ā)=ā3.2N Ayā=(5.0N)sin(130ā)=3.8N

How are the total resultant components Rxā and Ryā determined algebraically when adding multiple nonperpendicular vectors A, B, and C?
By summing the individual horizontal and vertical components separately: Rxā=Axā+Bxā+Cxā and Ryā=Ayā+Byā+Cyā.
What is the physical definition of friction?
Friction is a force that opposes the motion of two surfaces that are in contact with each other.

Based on the comparison table, when does static friction occur versus kinetic friction?
Static friction occurs when two surfaces are not sliding against each other (adjusting up to a maximum force to prevent sliding), whereas kinetic friction occurs when two surfaces are sliding against each other (opposing sliding with an approximately constant force).
What two main factors affect the amount of friction between two surfaces?
The types of surfaces in contact (rougher surfaces result in greater friction).
The normal force pushing the surfaces together (a greater normal force results in greater friction).

In the graph of Kinetic Friction Force vs. Normal Force, which surface material has the greatest slope (and thus the highest coefficient of kinetic friction)?
Sandpaper.
What does the coefficient of friction (μ) describe?
It is a unitless number that describes the frictional interaction between two surfaces in contact based on their materials and conditions, rather than a property of one surface alone.

What is the formula used to calculate the kinetic friction force (Ff,kineticā)?
Ff,kineticā=μkāFNā, where μkā is the coefficient of kinetic friction and FNā is the normal force.

What mathematical inequality describes the static friction force (Ff,staticā)?
Ff,staticāā¤Ī¼sāFNā, where μsā is the coefficient of static friction and FNā is the normal force.
How is the maximum static friction force (Fs,maxā) calculated, and what does it represent?
Fs,maxā=μsāFNā; it represents the greatest possible static friction force before an object begins sliding (the threshold of sliding).
If the maximum static friction between a desk and the floor is 50N and a student pushes it with a force of 30N, what is the actual static friction force?
30N, because static friction adjusts to exactly match the applied force until the maximum threshold is reached.

According to Table 2, which surface combination has the lowest coefficients of static and kinetic friction (μsā=0.04 and μkā=0.04)?
Nonstick coating on steel.
When a box is pushed horizontally across a floor at a constant speed, what is true about the applied force and the net horizontal force?
The applied force must equal the kinetic friction force in magnitude, resulting in a net horizontal force of 0N.