1/33
Looks like no tags are added yet.
How a p-n junction works
Movement
Extra electrons (n-type) → anode
Extra holes (p-type) → cathode
When they come together the holes and electrons diffuse to opposite ends, but end up creating an opposite “intrinsic” charge
+ charge on n side (donor lost electrons)
- charge on p side (acceptor lost holes)
Deletion layer is created by the combining of conduction electrons and holes
Leaves impurities with…
+ charge (n side)
- charge (p side)
No free charge carriers in the region which is maintained by electric fields
n-type
Donors
Extra electron(s)
Become positive (when electron lost)
p-type
Acceptors
Holes
Become negative (when electron fills hole)
Reverse bias
When the anode is placed on the n-side and the depletion layer widens
Draws the electrons and holes out of the depletion layer
Depletion layer becomes a solid-state ionization chamber
Why do semiconductors have a better energy resolution than crystals?
Require ~10x less energy to create a single ion pair
More information carriers = dramatically less noise
Semiconductor quality control
Daily - battery check, background determination, constancy check
Quarterly or semiannually - calibration
Liquid scintillation detectors
Count beta emitters
Solvents dissolve radioactive samples into vials, radioactivity scintillates a set of solutions in the vials and PMTs detect light from the “scintillation cocktails” in the vials
Collar dosimeters
!!! NEED: How are they used? !!!
Al2O3 crystalline material becomes luminescent under selected laser frequencies.
Luminescence proportional to the amount of radiation exposure

Ring TLDs
!!! NEED: Usage cases !!!
Lithium fluoride chip absorbs energy of ionizing radiation
Heated at characteristic temperatures to emit the absorbed energy as visible light.
Amount of exposure is determined by the light intensities
Background
Signals detected that do not originate from the intended radioactive source
Sources of background radiation
Cosmic radiation
Radiation from surrounding materials or other sources in the area
Electronic noise or false signals from the instrument
Net counts equation
Net counts = gross counts (total measured) - background counts to provide the net counts
Noise
Any undesired fluctuation that appears superimposed on a signal source
Sources of noise
Randomness of decay
Energy transfer variations
Electrical partial frequencies that develop
Background radiation
Poisson distributions
Counts whole non-negative integer events occurring within a fixed interval or space.
Discrete
Gaussian distributions
Measures physical or continuous quantities that can take any real value, including decimals and negative numbers.
Continuous
Poisson vs Gaussian
Poisson - discrete
Range of probabilities for the mean based on standard deviations from the measurement
Gaussian - continuous
Range of probabilities for a measurement based on standard deviations from the mean
How is standard deviation and the mean related in a Poisson distribution?
Range of probabilities for the mean based on standard deviations from the measurement
% probability ranges for 1, 2 and 3 standard deviations
1 SD = 68.3%
2 SD = 95.45%
3 SD = 99.7%
Percent standard deviation (aka Coefficiont of Variation, CV) equation

Principle of add in quatrature for standard deviations
Standard deviations compound with multiple measurements

Chi-square testing
See if system is complaint with the laws of nuclear radiation statistics
Results:
p < 0.1 = data set has a larger variability than expected by statistics
p > 0.9 = less variability than expected
% DT losses equation

Paralyzable vs Non-paralyzable
P - Each event introduces a dead time, creating an extendable period of detector paralysis
Events “restart dead time”
NP - Pulses acquired during dead time ignored until maximum possible rate is reached
Events don’t “reset dead time”
Parker’s example (i was here for this lecture yay)
P - an interruptable reload in a game, pressing r resets the cooldown timer
NP - a non-interruptable reload in a game, pressing r doesn’t reset the cooldown timer
Gamma spectrum makeup
Counts vs energy level
(need more info?)
Gamma spectrum - Emax
Maximum possible energy given to an electron by a photon’s backscatter interaction
Compton edge
Electron energy is absorbed by the detector, but the scattered photon escapes
Gamma spectrum - Emin
Minimum possible energy of the backscattered photon on the detector
Backscatter peak
Gamma spectrum - Compton Edge
Upper limit on how much energy a photon can transfer to a compton electron
Gamma ray undergoes an initial Compton scattering interaction with the crystal
Gamma ray escapes the crystal
Only the Compton electron deposits its energy into the crystal
Energy recorded is lower than photopeak
Gamma spectrum - Backscatter Peak
Inverse of the Compton edge
Gamma ray is scattered in the source or surrounding structures such that the scattered photon is then absorbed in the scintillation crystal.
Scattered photon deposits energy into the crystal instead of the Compton electron
Crystal thickness
Thinner = less likely a gamma photon will deposit energy
Thicker = more likely a gamma photon will deposit energy
Efficiency is also known as what
Sensitivity
Absolute peak efficiency equation

Factors affecting Geometry
Different volumes in a well counter
Higher volumes
Less of the activity interacts with the crystal
Some gamma energy is being attenuated by the source
Probe-thyroid positioning
Carefully center the detector on the thyroid gland
Consistent with distance for each mesurement
Attenuation
In the source itself
!!! NEED: Define? !!!
In the medium b/w source and detector
Neo-probe
Image the biodistribution of the radiopharmaceutical prior to surgical procedures.
If a node is shown as blue (from dye injected) and radioactive from the nuclide, the tumor is removed