1/58
Vocabulary flashcards covering key definitions and principles of magnetic and electric circuits, including flux density, magnetizing force, saturation, and hysteresis.
Magnetic Circuit
The path along which flux lines follow as they form their complete loops. The magnetic flux in this circuit is directly proportional to the magnetomotive force and inversely proportional to the reluctance.
Magnetic Flux
The total number of flux lines in a magnetic circuit, serving as the counterpart of current in an electric circuit. Flux lines do not flow, but expand and contract from the center of the conductor outward.
Magnetomotive Force
A quantity equal to the number of coil turns in the circuit multiplied by the current through those coils.
Magnetizing Force
The measure of the magnetomotive force per unit length in a magnetic circuit.
Reluctance
The opposition to the setting up of flux lines in a magnetic circuit, acting as the counterpart of resistance in an electric circuit.
Flux Density
The measure of the amount of flux per unit cross-section of the magnetic circuit.
Permeability
The measure of ease with which flux may be set up in a unit length and cross-section of a material; it is also a measure of flux density per magnetizing force.
B-H Graph
A plot of flux density with respect to magnetizing intensity for a magnetic material; sometimes referred to as a Magnetization Curve.
Current Density
The amount of current flowing per cross-section of the conductor.
Voltage Gradient
The measure of electromotive force per unit length in an electric circuit or field, determined by dividing the voltage between two points by the distance between them.
Resistivity
The resistance of a unit length and cross-section of a certain material, with conductivity being its reciprocal.
Saturation
The condition where all domains in a magnetic material have aligned with the magnetic field, meaning the gain in flux density for a given increase in magnetizing force is no more than would occur in air for the same increase.
Theoretical Saturation
The point where all domains in the magnetic material have aligned themselves with the magnetic field.
Practical Saturation
The point where the gain in flux density for an increase in magnetizing force becomes so small that it is no longer practical to attempt to increase it.
Hysteresis
The lagging of the flux density behind the magnetizing force.
Hysteresis Loop
A material's magnetization curve plotted to show what happens to flux density as the magnetizing force is increased, decreased, increased in the opposite direction, and then returned to zero.
DC Ohmic Resistance
The property of an electrical circuit that opposes the flow of direct current.
AC Effective Resistance
The total opposition to alternating-current flow, consisting of DC resistance, skin effect, proximity effect, eddy currents, hysteresis losses, and dielectric losses.
Residual Magnetism
The amount of flux density remaining in a magnetic material after the magnetizing force has been removed.
Coercive Force
The amount of magnetizing force required to be applied in the reverse direction to remove remaining magnetism.
Active Length of a Conductor
The portion of a conductor that actually cuts through magnetic flux lines as it moves, often increased by adding more loops.
Prime Mover
A mechanical device, such as a diesel engine, turbine, or windmill, that supplies energy to drive an electrical generator.
Conductor Velocity
The relative speed at which a conductor moves through a magnetic field, normally controlled by adjusting the speed of the prime mover.
Left Hand Rule
A directional convention where the thumb indicates force or motion, the first finger indicates magnetic field direction, and the second finger indicates current direction.
Eddy Currents
Closed circulating loops of current induced within a conductive core when crossed by magnetic flux lines, which can be minimized by using laminated steel.
Air Gap
A physical opening placed in a magnetic circuit to provide clearance for moving parts, which acts in series and increases the total reluctance.
Lenz's Law
The principle stating that the direction of an induced electromotive force produces a current whose magnetic field opposes the original change in flux.
Faraday's Law of Electromagnetic Induction
The principle stating that the magnitude of voltage induced in a loop of wire is proportional to the rate of change of flux linkages, given by e=Blv.
Cycle
The span or distance from one point on an alternating waveform to the point where it begins to repeat itself.
Frequency
The number of complete waveform cycles that occur within one second.
Retentivity
The capacity or ability of a material to retain magnetism after the action of an external magnetizing force has been removed.
Meters Used to Determine Effective Resistance
AC voltmeter and AC ammeter.
Effect of Increasing AC Frequency on Effective Resistance
Causes it to increase.
Advantages of AC over DC
Easier voltage transformation, economical long-distance transmission, and simpler generation and distribution equipment.
Applications Where DC is Preferred
Battery equipment, electroplating, battery charging, electronics, and DC motors.
Epp
Peak-to-peak voltage.
Alternative Name for RMS Value
Effective value.
Angles of Sine Wave Peak Values
Positive peak occurs at 90∘; negative peak occurs at 270∘.
Average Value of a Complete AC Sine Wave
0 (zero).
Average Value of One Alternation
0.637 times the peak value (0.637×Ep).
Standard AC Value Used in Practical Measurements
RMS (effective) value.
Three Factors Determining Induced EMF
Magnetic flux density, active conductor length, and conductor velocity.
Generator Field Rheostat
A variable resistor used to control generator field current and magnetic flux density.
Formula for Induced EMF
E=B×L×v
Effect of Decreasing Generator Field Rheostat Resistance
Field current and magnetic flux density increase.
Factor Most Commonly Used to Control Generated EMF
Magnetic flux density.
Alternating Current (AC)
Electric current that periodically reverses direction and continuously changes in magnitude.
Formula for Peak-to-Peak Voltage
E<em>pp=2×E</em>p
Three Common Magnetic Metals
Iron, nickel, and cobalt.
Conductor rule: What does the thumb indicate?
Direction of current flow
Conductor rule: What do curled fingers indicate?
Direction of magnetic flux
Coil rule: What does the thumb indicate?
North pole of the coil
Coil rule: What do curled fingers indicate?
Direction of current flow
AC generation: What does the thumb indicate?
Motion of the conductor
AC generation: What does the index finger indicate?
Direction of magnetic flux (field)
AC generation: What does the middle finger indicate?
Direction of induced current
Conductor rule: Which finger shows current?
Thumb
Coil rule: Which finger shows North?
Thumb
AC generation: Which finger shows flux and current?
Index = flux; Middle = current