1/225
Looks like no tags are added yet.
1.A.1 - What are the eligibility requirements for a private pilot certificate?
Be at least 17
Be able to read, write and understand english
Hold at least a Third medical certificate
Receive required ground and flight endorsements
Meet Required aeronautic experience
Pass the FAA written test
1.A.2 - What privileges and limitations apply to a private pilot?
Cannot act as a pilot carrying passengers or property for hire
- Prorata
- Charitable and non profit
- Search location
- Demo flight
1.A.6 - What documents do you need for FAA ramp inspection?
- Pilot's License
- Medical
- Photo ID
1.A.7 - Definition of high performance airplane. What do you need to act as PIC?
Engine > 200 HP
Need:
Received and logged ground and flight time from authorized CFI and was found proficient
One time endorsement from CFI
1.A.8 - Other than high performance what other types of aircraft require endorsement ASEL?
High altitude airplanes > 25,000
Tailwheel
1.A.9 - What is the definition of complex airplane?
- Retractable land gear
- Flaps
- Controllable pitch propeller
Need:
Ground and flight from CFI
One time endorsement
1.A.10 - With respect to certification, privileges and limitations of airman define: category, class and type
Category - Broad class definition of aircraft (airplane, rotorcraft, glider)
Class - Classification within category (Single engine land, multi engine)
Type - Specific make and model (DC-9)
1.B.1 - What are the requirements to remain current as a pilot?
Flight review on the proceeding 24 months
To carry passengers:
- 2 takeoff/landings (Day)
- 3 takeoff/landing full stop night or tailwheel
1.B.5 How personal minimums reduces risks?
WE live by numbers
Facilitate the go no go decision
Help with deversion
4.A.1 What are the four forces that acts on a airplane?
Lift, gravity, thrust, drag
4.A.2 What flight condition will result on all forces being equal?
straight and level unaccelerated flight
4.A.3 What is an airfoil?
Device that gets a useful reaction (i.e. lift) from moving air.
examples: wings, propellers...
4.A.4 What is the angle of incidence?
The angle formed between the longitudinal axe of the airplane and the chord of the wing
4.A.5 What is relative wind?
Direction of the airflow with respect to the wing
4.A.6 What is the angle of attack?
Angle between wing chord line and relative wind
4.a.7 What is Bernoulli's principle?
the pressure in a fluid decreases as the fluid's velocity increases
4.A.8 What are several factors which will affect both lift and drag?
Wing Area
Shape of airfoil
Angle of attack
velocity of the air
air density
4.A.9 What is torque effect?
Torque effect involves Newton's Third Law of Physics - for every action, there is an equal and opposite reaction. Applied to the airplane, this means that as the internal engine parts and propeller are revolving in one direction, an equal force is trying to rotate the airplane in the opposite direction. It is greatest when at low airspeeds with high power settings and a high angle of attack.
4.A.11 What are four factor that contributes to torque?
Torque reaction of engine and propeller
Gyroscope effect of the propeller
corkscrewing effect of the propeller slipstream
Asymetrical loading of the propeller (p-factor)
4.A.12 What is centrifugal force?
Opposite force to the horizontal component of the lift
4.A.13 What is load factor?
Ration of the load divided by weight. Also called G force or G loading.
4.A.14 For what two reasons load factor is important to pilots?
Danger to overload impose to the aircraft structure
increase on load factor increase stall speed
4.A.15 What situations may result in load factor reaching maximum or being exceeded?
Level Turns
Turbulence
Speed
4.A.17 What effects does an increase in load factor have on stalling speed?
As load factor increases the stall speed increases
4.A.18 Define the term maneuvering speed
Maximum speed at which the limit load can be imposed without causing structural damage
4.A.19 Discuss the effects of maneuvering speed related to weight
Maneuvering speed increases with an increase weight and decrease with a decrease in the weight
4.A.21 what causes an airplane to stall?
Excessive angle of attack
4.A.23 What causes a spin?
The primary cause of an inadvertent spin is exceeding the critical angle of attack while applying excessive or insufficient rudder, and to a lesser extent, aileron.
4.A.24 When are spins most likely to occur?
Engine failure during takeoff climb out
Crossed-control turn from base to final
Engine failure on approach to landing
Go around with full nose-up trim
Go-around with improper flap retraction
4.A.25 - what procedure should be used to recover from spin?
P - Power
A - Ailerons
R - Rudder
E - Elevators
4.A.27 What is ground effect?
Improved performance of the airplane when operating near the ground
4.b.1 What is empty weight?
It is the weight of the airplane without fuel.
Depending on the FAR oil may be included
4.b.1 What is Gross weight of an airplane?
Maximum allowed weight of an airplane and its content
4.b.1 What is useful load?
Weight of pilot, copilot, passengers, bagage, usable fuel and drainable oil
4.b.1 What is the center of gravity?
Point about which an aircraft would balance if could be suspended at that point
4.B.3 What performance characteristics will be adversely affected when an aircraft has been overloaded?
Higher takeoff speed
Longer takeoff run
Reduced rate and angle of climb
Lower max altitude
shorter range
reduced cruise speed
reduced maneuverability
Higher stall speed
Higher landing speed
Longer landing roll
Excessive weight on nose wheel
4.b.4 What effect does a forward center of gravity on an aircraft flight characteristics?
Higher Stall speed
Lower cruise speed
More stable
Greater back elevator pressure required
4.b.5 What effect does a rearward center of gravity on an aircraft flight characteristics?
lower stall speed
higher cruise speed
less stable
4.C.1 What are some of the main elements of aircraft performance?
Takeoff and landing distances
Rate of climb
ceiling
Payload
Range
Speed
Fuel Economy
Maneuverability
Stability
4.C.2 What factors affects the performance of an aircraft during takeoff and landing?
Air density
Runway surface
Runway winds
Upslope of downslope runways
Weight
4.c.5 What does an increase on density altitude have on takeoff and landing performance?
Increase takeoff distance (Greater TAS required)
Reduced rate of climb
Increased true airspeed on approach and landing
Increased landing roll distance
4.c.6 Define density altitude
Pressure altitude corrected for non-standard temperature
4.c.8 what factors affect density altitude?
Altitude
Temperature
Humidity
Define pressure altitude
altitude above the standard datum plane (29.92" Hg)
5.a.1 what are the four main control surfaces and what are their function?
Elevators
Ailerons
Rudder
Trim tabs
5.a.3 What are flaps and what is their function?
The wing flaps are movable panels on the inboard trailing edges of the wings They are hinged so that they may be extended downward into the flow of air beneath the wings to increase both lift and drag. Their purpose is to permit a slower airspeed and a steeper angle of descent during a landing approach. In some cases, they may also be used to shorten the takeoff distance.
5.a.4 describe the landing gear system on this airplane?
Tricycle-type system using to main wheel sand a steerable nose wheel. The struts are Olio type shocks which use compressed air and hydraulic fluid.
5.a.5 Describe the breaking system on this aircraft.
Hydraulic actuated disk type brakes in each main gear wheel
5.a.6 What type of hydraulic fluid is used on your aircraft?
Mineral based hydraulic fluid. dyed red.
what type of engine does your aircraft have?
4 opposed cylinders
overhead valve
air cooled
carbureted engine
180HP
5.A.9 What four strokes must occur in each cylinder of a typical four-stroke engine in order for it to produce full power?
Intake
Compression
Power
Exhaust
5.A.10 What does a carburetor do?
Carburetion may be defined as the process of mixing fuel and air in the correct proportions to from a combustable mixture. the carburetor vaporizes liquid fuel into a small particles and then mixes it with air. it measures the airflow and meters fuel accordingly
5.A.11 How carburetor heat heat system works?
A carburetor system valve, controlled by the pilot, allows unfiltered air to be directed to the induction air manifold prior to the carburetor.
5.A.13 What does the throttle do?
The throttle allows the pilot to manually control the amount of fuel/air charge entering the cylinders. This in turn regulates engine manifold pressure.
5.A.What does the mixture control do?
regulates the fuel-to-air ratio
used to prevent mixture from becoming too rich at high altitudes due to decreasing air density.
Describe a fuel injection system installed in some aircraft.
Engine Driven fuel pump
Fuel/Air control unit
Fuel manifold valve
Discharge nozzle
Aux fuel pump
Fuel Pressure/Flow indication
5.a.16 What type of ignition system does your airplane have?
Two engine driven magnetos
2 Spark plugs per cylinder
5.a.17 What are the two main advantages of a dual ignition system?
a. safety
b. More complete combustion of the misture
5.a. 18 What time of fuel system does your aircraft have?
2 50gallon tanks
Engine driven pump and an auxiliary pump
5.a.19 What are the purpose of fuel pump vents?
Prevent vacuum in the fuel tank so the fuel flow does not stop
5.a.23 What color of dye is added to the following fuel grades: 80, 100, 100LL, Turbine?
80 (obsolete) Red
100 (obsolete) Green
100 LL Blue
Jet A - clear
5.a.25 What is the function of the manual primer, and how it does operate?
Provede assistance of starting the engine
Draws fuel from the from the fuel strainer and inject directly into the into the cylinder intake port
5.a.26 Describe the electrical system in your airplane
The electrical system includes a 14-volt, 60-amp alternator, a 12-volt battery, a voltage regulator, an overvoltage relay and a master switch relay.
5.a.27 How are the circuits for the various electrical accessories within the aircraft protected?
Circuit breakers (can be reset)
Fuse box
5.a.28 The electrical system provides power for which eqpments in an airplane?
a. Radio Equipment
b. turn coordinator
c. fuel gauges
d. pitot heat
e. landing lights
f. taxi lights
g. strobe lights
h. interior lights
i. instrument lights
j. position lights
k. flaps (maybe)
l. Stall warning system (maybe)
m. oil temp gauge
n. electric fuel pump (maybe)
5.a.24 what are the five basic function of oil?
Lubricates
Cools
Removes
Seals
Cleans
5.b.1 what causes carburetor icing?
The vaporization of the fuel and combined with the expansion of air as it passes through the carburetor causes a sudden cooling of the mixture.
5.b.2 What method is used to determine that carburetor icing has been removed
When heat is first applied there will be a drop on the RPM followed by an increase and possibly some intermittent roughness. When the carb heat is turned off the the RPM will rise to a setting greater then before
5.b.3 What conditions are favorable for carburetor icing?
Temperature below 70F and humidity around 80%
But can happen on other temperatures and humidity
5.b.7 What is detonation?
Detonation is an uncontrolled, explosive ignition of the fuel/air mixture within the cylinder's combustion chamber
If not corrected
lead to failure of the piston, cylinder, or values
also cause engine overheating, roughness, or loss of power
5.b.8 What are some of the most common operational causes of detonation?
Using lower fuel grade
high manifold pressure with low RPM
High power setting with excessively lean mixture
Extended ground operations or climbs
5.b.9 what action should be taken for detonation
a. Make sure you have the correct fuel grade
b. Open cow flaps (if applicable)
c. Mixture rich (shallow climbs)
d. Avoid extended high power steep climbs
e. Monitor the airplane gauges
5.b.10 What is preignition?
Preignition occurs when the fuel/air mixture ignites prior tot he engine's normal ignition event. Premature burning is usually caused by a residential hot spot in the combustion chamber, often created by a small carbon deposit on the spark plug, a cracked spark plug insulator, or other damage in the cylinder that causes a part to heat sufficiently to ignite the fuel/air charge
5.b.11 What action should be taken if preignition is suspected?
Reduce power
Reduce climb rate
Enrich fuel/mix
open cow flaps
5.b.12 During run up BOTH to RIGHT no rpm drop?
left p lead is not grounding
left p lead mag has totally failed
5.b.16 Oil pressure low oil temperature normal
oil pressure low indicates possibly insufficient oil
Normal temp may indicate clogged oil pressure relieve valve or gauge malfunction
Stop the flight immediately
5.b.17 what procedure should be followed for partial loss of power in the airplane?
Carb hear
Check fuel gauges
Check fuel selection valve
Mixture
Primer
Magnetos
ENGINE FIRE IN FLIGHT
1. MIXTURE - CUTOFF
2. FUEL SELECTOR - OFF
3. FUEL PUMP - OFF
4. IGNITION SWITCH - OFF
5. GLIDE - ESTABLISH
6. FLAPS - AS REQUIRED
7. MASTER SWITCHES - OFF
5.b.19 ENGINE FIRE ON THE GROUND
If Engine Starts
- Increase power to higher RPM for an instant
- Shut down engine
If Engine does not start
- Throttle full position
- Mix idle cut-off
- tr engine start put the fire off by vacuum
If fire continues
- Ignition OFF
- Master OFF
- Fuel OFF
5.c.1 Pitot static system instruments
The airspeed indicator, vertical speed indicator, and altimeter.
5.c.2 How does the altimeter work?
The altimeter is connected to the static port. Inside are sealed aneroid wafers. As the barometric pressure increases/decreases, it causes the wafers to expand or contract. As the pressure decreases, the aneroid wafers expand and indicate an increase in altitude
5.c.3 A pressure altimeter is subject to what limitations? ---High to low or hot to cold, look out below.
warm day - indicates lower then actually is
cold day - indicates higher then actually is
high pressure - indicates lower then actually is
lower pressure - indicates higher then actually is
how determine the following altitudes
Absolute - Above ground
Indicated - Read from altimeter
Pressure - read from altimeter after setting to 29.92
True Altitude - MSL
Density - Pressure altitude adjusted for temperature variation
How does the airspeed indicator work?
Compares ram air from pitot tube with static air from static port.
limitations of airspeed indicator?
Depends on proper flow of air in the pitot/static system
Errors of airspeed indicator
Position Error - static port sensing erroneous static pressure
Density errors
Compressibility error
5.c.8 Airspeed types
Indicated Airspeed (IAS) - Read from the airspeed indicator (non error correction)
Calibrated Airspeed (CAS) - Corrected for errors, equal to IAS on sea level standard atmosphere
Equivalent airspeed
True airspeed - CAS corrected for altitude and temperature
Airspeed not in the indicator
Maneuvering speed (Va)
Landing gear operator speed (VLo)
Best-Angle of climbing (Vx)
Best-Rate of climb (Vy)
Airspeed limitation applied to the color code
White Arc - Flap operating range
Lower white arc - stall speed landing configuration (VSo)
Upper white Arc - Max flaps extended (Vfe)
Green Arc - Normal operating range
Lower green arc - stall speed clean configuration (Vs1)
Upper Green Arc - Normal operation max structural cruise speed (VNo)
Yellow arc - Caution range
Red line - Never exceed Vne
5.D.1 What are instruments containing gyroscope
Turn Coordinator
Heading indicator
Attitude indicator
Gyroscope properties
Rigidity in space
Precession - tilting or turning of a gyro
How does the vacuum system operate?
The vacuum or pressure system spins the gyro by drawing a stream of air against the rotor vanes to spin the rotor at high speeds, essentially the same as a water wheel or turbine operates. The amount of vacuum or pressure required for instrument operation varies by manufacturer and is usually between 4.5 to 5.5 in. Hg. One source of vacuum for the gyros installed in light aircraft is the vane-type engine-driven pump, mounted on the accessory case of the engine.
Attitude Indicator
Miniture airplane and horizon bar. Indicates attitude of airplane relative to the true horizon.
How Heading Indicator operates
based on rigidity of a gyro
turns in a vertical plane
as the airplane turns the gyro stays rigid and the heading is indicated
Errors in Heading Indicator
Precession due to internal friction. Frequent realignment to magnetic compass is required.
5.d.11 How does the turn coordinator operate?
The turn part of the instrument uses precession to indicate direction and approximate rate of turn. A gyro reacts by trying to move in reaction to the force applied, thus moving the miniature aircraft in proportion to the rate of turn. The inclinometer in the instrument is a black glass ball sealed inside a curved glass tube that is partially filled with a liquid. The ball measures the relative strength of the force of gravity and the force of inertia caused by a turn.
5.d.13 What will the turn coordinator indicate when the aircraft is in a skidding or slipping turn?
slip - the ball will be in the inside of the tube
Skid - The ball will be in the outside of the turn. Too much rate of turn
How the magnetic compass works?
Magnetized needles mounted in a float assembly aligned parallel to earth's magnetic force.
5.e.2 Magnetic compass limitations
Steeper bank angles the compass will show erratic and unpredictable readings
5.e.3 Magnetic Compass Errors
OSCILLATION - turbulence
DEVIATION - electric and magnetic in plane
VARIATION - difference between True and Magnetic North
DIP ERRORS:
(1) ACCELERATION - east to west: ANDS
(2) TURNING ERRORS - north and south: UNOS