1/36
Looks like no tags are added yet.
treatment
What type of instrument is a sickle scaler
sickle scaler
A periodontal instrument used for calculus removal from the crowns of the teeth
supragingival
Sickle scalers are used for the removal of medium- to large-sized ________ calculus deposits
anterior and posterior
What two types of sickle scalers are there
root
Sickle scaler is not recommended for use on ___ surfaces
triangular
What shape is the cross section of a sickle scaler
tip, back
The sickle scaler has a pointed ___ and ___
2
How many cutting edges per working end on a sickle scaler
perpendicular
Face is ________ to the lower shank
level
Cutting edges are ____ with one another on each side
stabilization
the act of preparing for an instrument stroke by locking the joints of the ring finger, and pressing the fingertip against a tooth surface for control
fulcrum
Acts as a “support beam” and “hand brake” for the hand during the instrumentation stroke
anterior third
This part of the working end must be adapted to the tooth at all times
roll, pivot
You must __ and ___ to maintain adaptation
index, thumb
The drive finger is either the ____ finger or the ____, which determines which direction the working end turns
pivoting
A slight swinging motion of the hand and arm by balancing on the fulcrum
Primarily used when moving around line angles onto a proximal surface
toward
Correct angulation is achieved by tilting the lower shank ____ the tooth surface
70-80
Correct face-to-tooth surface angulation
tissue injury
Angulation greater than 90 degrees will cause
burnish
Angulation less than 45 degrees will cause
burnish
Cutting edge slides over the surface of the calculus and smooths it out making it harder to remove
popped, layers
Calculus should be _____ off and never removed in ______
lateral pressure
Created by applying pressure with index finger and thumb inward against instrument handle
assessment stroke
requires feather light touch against tooth
calculus removal
requires firm lateral pressure against tooth
root debridement
requires a bit less lateral pressure than calculus removal
calculus removal
Inadequate lateral pressure can result in incomplete:
midline to distal and midline to mesial
Sequence of scaling anterior teeth
towards the tooth
When scaling anterior teeth, the bump must be:
roll
At the line angle, ___ the handle to maintain adaptation of the tip third
51%
Be sure to make strokes at least ___ across the mesial surface
vertical
Stroke used from distal line angle to distal on posterior teeth
oblique
Stroke used from distal line angle to mesial line angle on posterior teeth
horizontal
Stroke used for the mesial surface of posterior mandibular teeth
relaxed
Finger muscles must be ____ between strokes
H6/7
Another name for anterior sickle scaler
nevi4
Another name for posterior sickle scaler