1/12
Vocabulary flashcards covering machine components, tooling, and safety rules for the knee mill and engine lathe.
Ram and Turret Mill (Knee Mill)
A milling machine comprising components including the knee, column, spindle, power feed, head, ram, table, quill lock, X-axis handle, Y-axis handle, and Z-axis handle.
Engine Lathe
A machine tool comprising components including the headstock, tool post, spindle, cross slide, carriage, live center, compound, tailstock, apron, and feed change gear box.
Draw Bar Wrench Rule
A mill safety rule specifying to remove draw bar wrench immediately aIer use.
End Mill Holding Rule
A mill safety rule specifying to never hold end mills in drill chucks.
Vise Handle Rule
A mill safety rule specifying to never leave vise handles on the vise while machining.
Lathe T-Handle Rule
An engine lathe safety rule specifying to never leave the T-handle in the chuck.
5:1 Length to Diameter Rule
An engine lathe rule specifying to use a live center if you exceed 5:1 length to diameter.
Lathe Speed Changing Rule
An engine lathe rule specifying to never change speeds when the machine is running.
Measurement Safety Rule
A safety rule for both the mill and lathe stating to never measure parts while machine is spinning.
Personal Attire Safety Rule
A safety rule specifying to never wear gloves, loose clothing, rings, watches, or other jewelry while operating the mill or lathe.
R8 Spring Collet
A mill toolholding component listed alongside the R8 drill chuck, end mill, boring head, and parallels.
Edge Finder
A setup tool listed alongside the tap follower, tap wrench, drill index, 0−1′′ micrometer, and 6′′ dial calipers.
4 Jaw Chuck
A lathe workholding device listed alongside the 3 jaw chuck, Morse drill chuck, tool holder, turning tool RH, and boring bar.