1/69
Looks like no tags are added yet.
What is the proper location for bacterially contaminated materials?
Back of the classroom.
Why is it important to remove tape from tubes?
So when they are cleaned the dirt gets stuck; tape prevents proper cleaning.
What are the main reasons for using aseptic technique?
To prevent contamination of cultures, yourself, and the environment.
How do you disinfect your work area?
By spraying disinfectant.
How do you sterilize an inoculating loop or needle?
By heating it until red on the burner.
How do you transfer from broth culture to broth culture?
Using a needle and disinfecting in between transfers.
Know the parts of the microscope.
Oculars (eyepieces), objective lenses, stage, illuminator, coarse adjustment, fine adjustment.
How do you care for the microscope?
Follow proper focusing, use immersion oil only on the 100x objective, clean lenses properly, and store correctly.
List the names of the objectives and their corresponding magnification.
Typical set: 4x, 10x, 40x, 100x oil immersion.
How do you calculate total magnification?
Magnification of objective Ă— 10 (oculars).
How do you focus on a specimen?
By using the coarse and fine focus knobs.
What is the purpose of immersion oil?
To eliminate the air gap and sharpen the focus, improving resolution at 100x.
What is a pure culture?
One specific type of organism separated for study.
Describe the streak plate method to obtain pure cultures. What is the purpose?
Quadrant streak method; the purpose is to isolate individual colonies from a mixed culture.
Define the term 'colony.'
Circular areas of growth started from one cell or isolated bacteria.
Explain why plates should be inverted during incubation.
So condensation falls on the lid, not on the bacteria.
How do you prepare a bacterial smear?
Loopful of liquid → air dry → heat fix.
or water drops → bacteria loop→ air dry→ heat fix
What are the steps to a gram stain
Heat fix bacteria before applying stains
primary stain→ Crystal violet used as a base stain
mordant→ grams iodine→ solidify color in bacteria
decolorizers→ ethyl alcohol→ first step to differentiate
counter stain→ safranin→ stains both big only gram - picks the color up
What are the steps for an endospore stain
primary stain→ put slide over boiling water→ add malachite green→ to dye the rough endospore→ remove from water and rinse→ counter stain→ Safarin→ to dye the vegetative cell pink/red→ rinse with water→ blot to dry
What are the steps in a capsule stain
place congo red #1 on slide→ put a loop full of k.pneumoniae on the congo red→ DO NOT HEAT FIX→ stain with congo red #2→ Rise and blot dry
Be able to recognize the organism and staining approach.
Based on morphology (bacillus/coccus) and color after staining.
Know the morphology terms for organisms used in lab.
Bacillus (rod) / coccus (sphere).
What is the importance of the Gram stain in microbiology?
To differentiate different bacteria types (Gram-positive vs Gram-negative).
Why is the Gram stain considered a differential stain?
Gram-positive stains purple, Gram-negative stains red/pink.
How do Gram-positive and Gram-negative bacteria differ in cellular structure?
Gram-positive has a thick peptidoglycan cell wall and will appear purple Gram-negative has a thin peptidoglycan plus an outer membrane and will appear red
What is the most critical step of the Gram staining procedure?
Decolorization
What does the capsule stain allow us to see?
The capsule.
What reagents are used in the capsule stain?
Congo red #1 and #2.
Is the capsule stain heat-fixed?
No
What indicates a successful capsule stain?
If you see the white circle (capsule).
Which organism did we use in the lab that has a capsule and what dose the capsule do?
K. pneumoniae; the capsule protects the cell from drying and invaders.
What is the purpose of the endospore stain?
To see if there is an endospore present.
Which genera of bacteria form endospores?
Bacillus or Clostridium.
What is an endospore?
A dormant bacterium waiting for nutrients to activate it
What conditions trigger endospore formation?
Lack of nutrients or harsh conditions.
Describe the characteristics of an endospore.
Highly resistant to most things (heat, chemicals, etc.).
What is the mordant in the endospore staining procedure?
Heat is the mordant (steam).
What color is the vegetative cell after endospore staining?
Pink/red.
What color is the endospore after staining?
Blue/green (or green).
Why is steam used in endospore staining?
Because endospores are more heat resistant and steam drives the stain into the spore.
What kind of agar is used to determine motility?
Semi-solid agar so bacteria can move.
How do you differentiate motile from non-motile organisms?
What is the rationale of the standard plate count method?
Cell = 1 colony; dilute to count.
If I have a 1 ml and I transferred it 4 times what would the plate count be
10^-5 CFU
What happens to the dilution factor if you have a 0.1 ml transfer instead of 1.0 ml?
Dilution factor adjusts accordingly.
What are bacteria phages
viruses that infect bacteria
What is a requirement for bacteria phages to replicate
They need a host
how do bacteria phages differ from virus that infect eukaryotes
the viruses only infect bacteria
What are the differences between lyric and lysogenic cycles and why is this important to know
Lytic cycle kills the cell and takes over
lysogenic cycle inserts DNA into host DNA cell stays alive
this is important to know because it helps you differentiate between the different types of bacteria
What type of molecule is a lysozyme
enzyme
what structure dose a lysozyme target
peptoglycan cell walls in bacteria
Is a lysozyme bacteriostatic or bacterialcidal
bacterialcidal
what is the difference between bacteriostatic or bacterialcidal
bacteriostatic agents stop bacteria from growing bactericidal agents kill bacteria directly
Who is more susceptible to a lysozyme Gram + bacteria or gram - bacteria
Gram positive becuse they have a thick peptioglycan cell wall with no other protection besides thier tectonic acids
How can teichoic acid influence lysozyme susceptibility
They can resist lysozyme action and are mainly found in gram + bacteria
What dose a larger zone of inhibition indicate
they lysozyme killed off more bacteria/ was more effective
Where is a lysozyme found naturally in the body
tears, saliva, mucus, and egg whites
What is the purpose of performing the Kirby-Bauer method?
To see how resistant a bacterium is to an antibiotic.
What kind of plates are used in the Kirby-Bauer method?
Mueller-Hinton agar.
Define a zone of inhibition.
Area where bacteria are dead (no growth around the disk).
How can you measure if an organism is sensitive or resistant to an antibiotic?
Measure the diameter of the zone and compare to the standard chart.
How do you prepare a smear from broth cultures?
Make a target circle, add loopfuls of liquid, disperse, air dry, heat fix.
How do you prepare a smear from plates and slants?
Add water to target circle, disperse organisms, air dry, heat fix.
What are important cautions for smear prep?
Handle slide by edges, label properly, cool the loop completely before use, flame the loop after it touches the slide.

What is this?
Gram stain

What is this?
Gram Stain

What is this?
Capsule stain

What is this?
Capsule stain

What is this?
Endospore stain

What is this?
Endospore stain