1/37
Comprehensive vocabulary flashcards covering seed potato physiological aging and certification schemes, soil physical properties and root-zone aeration, microclimate and aerial environmental demands, flowering biology, and canopy architecture in vegetable crop production.
Seed Tuber Degeneration
The progressive decline in seed vigor and health caused by a repeating cycle in which clean seed is exposed to insects, soil, handlers, and machinery in the field, leading to the accumulation of viral and bacterial pathogens, variety mix-ups from volunteer plants, and physical storage damage across successive generations.
Meristem Tip Culture
A laboratory tissue culture procedure used during clean seed potato production where excised meristematic tissue is cultured in vitro within sterile tubes to eliminate systemic viruses and bacteria.
Minitubers (G0)
The initial generation of very small, pathogen-tested seed tubers produced in enclosed, protected facilities from certified in vitro mother plantlets.
South African Seed Potato Scheme
A formal seed certification framework that begins with approved in vitro plantlets and advances through consecutive field multiplication stages (G0→G1→G2→G3→G4→G5→G6→G7), where G0–G2 are maintained under protected production and G3 onward are multiplied in open fields.
Seed Generation vs. Seed Class
Seed generation designates the numerical step indicating how many cycles a seed lot has been multiplied in the sequence, whereas seed class is the official regulatory certification grade granted after field inspections and laboratory assays confirm the lot meets legal quality standards.
Haulm Destruction
The intentional killing of potato foliage prior to harvest to halt the translocation of late-season aphid-transmitted viruses into developing tubers, arrest tuber growth to achieve target seed grade, and allow the periderm (skin) to mature and toughen.
Suberisation
The physiological post-harvest wound-healing process where tubers develop a protective suberin barrier across surface abrasions and cuts under warm, humid conditions prior to low-temperature storage.
Endodormancy
A physiological condition of true dormancy in potato buds controlled by endogenous biochemical factors, preventing sprout growth even under optimal ambient temperature and moisture.
Paradormancy
A state of bud growth arrest imposed by external ambient conditions (such as cold temperatures) or correlative apical dominance rather than endogenous internal bud blocks.
Physiological Age (Potato)
The biological developmental state of a seed tuber determined by the accumulation of thermal time, storage history, handling stress, and cultivar genetics, which dictates sprout number, emergence speed, stem density, and tuber size distribution.
Air-Filled Porosity
The fraction of total soil or substrate volume occupied by gas-filled pore space after gravitational water drainage has finished, serving as a critical indicator of root-zone aeration.
Macropores vs. Micropores
Macropores are large structural cracks, biopores, and inter-aggregate voids that conduct water rapidly and facilitate gas exchange and root penetration, whereas micropores are tiny intra-aggregate spaces that retain water via capillary forces so tightly that root tips cannot enter.
Soil Texture vs. Soil Structure
Soil texture is the inherent, unalterable proportion of sand, silt, and clay mineral particles, whereas soil structure describes the spatial aggregation of those particles into granules or blocks (peds), which can be altered within a single season by tillage, moisture, and compaction.
Bulk Density
The mass of dry soil divided by its total undisturbed core volume, used alongside particle density to calculate total porosity via the equation: Total Porosity=1−(bulk density÷particle density).
Penetration Resistance
A mechanical measurement of the soil's resistance to physical penetration, where values approaching ∼2MPa typically indicate severe mechanical compaction restricting root elongation.
Root-Zone Hypoxia
An oxygen deficiency occurring in saturated root media because oxygen diffuses roughly 10,000 times slower through water than through air, inhibiting aerobic ATP production, stopping active nutrient uptake, and triggering midday wilting.
Soil Buffering Capacity
The inherent chemical ability of a soil or growing substrate to resist fluctuations in pH upon the addition of acidic or basic compounds, being high in clays and organic substrates but low in sandy soils and inert media.
Electrical Conductivity Threshold (ECe)
The saturated-paste extract salinity level beyond which crop yield declines; defined in vegetable species as 1.2dS/m for onion (16% yield loss per dS/m), 1.7dS/m for potato (12% loss per dS/m), and 2.5dS/m for tomato (9.9% loss per dS/m).
Container Capacity
The maximum volume of water retained by a containerized growing substrate after complete saturation followed by free gravitational drainage without evaporation.
Easily Available Water
The portion of substrate moisture held at low tension between 1kPa and 5kPa matric potential that plants can absorb with minimal expenditure of energy.
Base Temperature (Tβ)
The lower physiological thermal threshold below which plant development stops and chilling injury can occur.
Daily Light Integral (DLI)
The total cumulative flux of photosynthetically active radiation delivered to a square meter of crop canopy over an entire 24-hour photoperiod, quantified in molm−2d−1.
Photosynthetic Photon Flux Density (PPFD)
The instantaneous intensity of photosynthetically active photons striking a surface per unit time, quantified in μmolm−2s−1.
Vapour-Pressure Deficit (VPD)
The difference between the saturation vapour pressure of the air and its actual vapour pressure, calculated as VPD=Saturation Vapour Pressure×(1−RH/100), representing the true atmospheric drying force acting on plant foliage.
Tipburn
A localized calcium-deficiency disorder affecting rapidly expanding leaf margins in leafy greens and brassicas, triggered by low VPD and weak transpiration rates that prevent sufficient xylem sap flow to enclosed, non-transpiring tissues.
Bolting (Lettuce)
The premature transition from vegetative rosette growth to reproductive stem elongation and flowering, induced by elevated temperatures combined with long photoperiods, rendering heads bitter and unmarketable.
Buttoning (Broccoli)
The premature formation of an undersized, unmarketable curd on a small, juvenile plant frame following exposure to cold temperature snaps.
Anthesis
The physiological developmental stage at which flower petals open and the reproductive organs (anthers and stigma) become mature and functional.
Anther Cone
A specialized floral morphology in tomatoes consisting of five laterally fused anthers encasing the style, which requires mechanical vibration or wind to dislodge and shed pollen out of its apical opening.
Parthenocarpy
The development and enlargement of a plant ovary into a mature, seedless fruit without pollination, pollen tube growth, or ovule fertilisation.
Gynoecious
Plant genotypes or cultivars (commonly utilized in modern greenhouse cucumber production) that produce exclusively or almost exclusively female, pistillate flowers.
Fruitlet Abortion
The premature yellowing, drying, and dropping of newly formed young ovaries, triggered by severe carbohydrate competition from older competing sink fruits or defective pollination under stress.
Autonomous Self-Pollination
A pollination mechanism typical of open sweet pepper flowers where pollen transfers directly from dehiscing anthers onto the receptive stigma within the same flower without requiring insect vectors or mechanical vibration.
Determinate vs. Indeterminate (Tomato)
Determinate tomatoes terminate main-stem growth in an inflorescence to form a compact bush with a concentrated, simultaneous harvest, whereas indeterminate tomatoes maintain continuous apical vegetative growth and repeating sympodial units (typically 3 leaves then 1 truss) requiring structural trellising.
Suckering (Side-Shoot Removal)
The manual pruning of lateral axillary shoots on tomato vines to restrict the plant to a defined stem architecture, thereby regulating total stem density and balancing vegetative frame with reproductive load.
Stem Density
The total number of productive stems per square meter of crop canopy, calculated using the formula: Stem Density=Plants/m2×Stems per plant.
Climacteric vs. Non-Climacteric (Ripening)
Climacteric fruits (such as tomato) display a surge in respiration and ethylene production and can ripen fully after being harvested at mature-green stage, whereas non-climacteric fruits (such as sweet pepper) do not ripen or accumulate sugars after harvest and must reach desired market color on the plant.
Marketable Yield Formula
The mathematical calculation of marketable commercial output defined as: Yield=P×F×M×q, where P is plant population density (plants/m2), F is the number of harvested fruit per plant, M is mean fruit mass (kg), and q is the marketable fraction by mass.