1/79
Looks like no tags are added yet.
chronotropy
refers to the influence on the heart rate (timing of frequency of contractions)
contractility (inotropy)
the physiological term for the force or energy of myocardial contraction
cross sectional area
the two dimensional shape formed when a plane intersects a three-dimensional object (for example, a plane through the LVOT)
dP/dT
the rate of pressure change in a cardiac ventricle over time during the isovolumic contraction phase, index of myocardial contractility, systolic assessment
edema
an excessive accumulation of serous fluid in tissue spaces or a body cavity
ellipsoid
a spheroid, solid figure generated by the revolution of an ellipse about one of its axes
endocardial border
the interface/ boundary visible in echo that separates the blood pool within the heart chambers from the myocardial tissue
Frank-Starling’s Law/ curve
states that the stroke volume of the heart increases in response to an increase in the volume of blood in the ventricles before contraction (preload, EDV)
fractional shortening (FS)
measurement that quantifies the percentage change in the LV internal diameter between the ned of diastole and the end of systole
FS = LVEDD - LVESD / LVEDD x 100
hemoptysis
pink tinged sputum from the lower respiratory tract, including the lungs and airways
hepatomegaly
enlargement of the liver
infundibulum
the smooth-walled muscular outflow tract of the RV that leads to the pulmonary valve
jugular venous distension (JVD)
the visible bulging of the neck veins, indicates elevated pressure in the right atrium or superior vena cava
normokinesis/ kinetic
normal wall motion and radial thickening of the cardiac segments during contraction
hypokinesis/ kinetic
decreased movement or weak contraction of the heart muscle, the mildest form of wall motion abnormality, heart segment moves and thickens less than normal during systole but still retains some contractile function
dyskinesis/kinetic
a severe wall motion abnormality where a segment of the heart muscle exhibits paradoxical outward bulging or thinning during systole, rather than contracting normally
akinesis/kinetic
regional wall motion abnormality where a segment of the heart muscle fails to contract but does not bulge outward
what three factors determine systolic function, and what term refers to all of them?
contractility, preload, and afterload; they are referred to as “loading conditions”
myofibril
a rod-like organelle within muscle cells, composed of repeating contractile units called sarcomeres containing the proteins actin and myosin that generate force through sliding filaments
pulmonary vascular resistance
the resistance to blood flow through the pulmonary circulation
Quinones
noninvasive method to measure left ventricular volume, ejection fraction, and regurgitant volumes, uses 2D linear measurements
Simpson’s rule of discs/ biplane
2D technique for quantifying LV volume and LVEF. The clinical gold standard for LV assessment, minimizes geometric assumptions about ventricular shape
speckle tracking echocardiography
an advanced, non-invasive ultrasound imaging technique that quantifies myocardial deformation (strain) by tracking natural acoustic markers, or “speckles” within the heart muscle across sequential frames
splenomegaly
the abnormal enlargement of the spleen
strain
quantitatively measures the myocardial deformation of the heart muscle during the cardiac cycle
strain rate
the speed of deformation, the difference in velocity between two points by the distance between them
surface rendering
displays the surfaces of cardiac structures or organs as solid/ wireframe 3D object, used for volumes and function without geometric assumptions
systemic vascular resistance
a hemodynamic parameter representing the resistance to blood flow in the systemic circulation
tachypnea
abnormally rapid and shallow breathing
Teicholz
historical echo technique used to estimate LVEF by calculating ventricular volumes from a single linear dimension measured in PSAX, not used due to geometric assumptions
tissue doppler imaging (TDI)
AKA tissue Doppler echocardiography (TDE) and tissue velocity imaging (TVI), measures the velocity of myocardial motion instead of blood flow
trabeculation
localized, > or equal to 3mm protrusions of the ventricular wall that have no free intracavitary course, distinguishing them from false tendons or aberrant bands
Trendelenburg position
the body is lain supine on a 15-30 degree incline with feet above the head
velocity time integral (VTI)
quantifies the distance blood travels during one cardiac cycle
ventricular interdependence
the psychological phenomenon where the volume, pressure, or function of one ventricle directly influences the performance of the other
left ventricle shape
ellipsoid and symmetrical
right ventricle shape
triangular from side, crescent shaped from cross section
_____________ _______ is the most important determinant of the shape of the RV
interventricular septum
systolic function predicts clinical outcome for…
ischemic cardiac disease
cardiomyopathies
valvular heart disease
congenital heart disease
EF equation
EF = (EDV - ESV) / EDV x 100
normal EF
> than or = to 52%
mild LV dysfunction EF
41-51%
moderate LV dysfunction EF
30-40%
severe LV dysfunction EF
<30%
What causes ventricular torsion during contraction?
Unequal rotational motion between the apex and the base, which creates a "twist and untwist" or "wringing out" motion during myocardial contraction.
ventricular systole characteristics (mechanical, valves, ECG)
chamber is contracting and blood is being ejected
from the AV valve closure to SL valve closure
ECG peak of the R wave to the end of the T wave
the two primary phases of ventricular systole
isovolumic contraction and ventricular ejection (divided into rapid and reduced ejection)
how do changes in contractility impact SV and ESV
contractility and SV are directly related, while indirectly related to ESV
as contractility and SV increase, ESV decreases
what clinical conditions cause preload to increase
hypervolemia, regurgitation, and heart failure
what clinical conditions increase afterload
Conditions like hypertension, aortic stenosis, and vasoconstriction that increase resistance against which the heart must pump.
what anatomical remodeling does increased cardiac workload cause?
Increased cardiac workload can lead to hypertrophy of the myocardium, to enhance contractile function and cope with the heightened demands.
What are the specific effects of increasing and decreasing afterload on stroke volume (SV) and end-systolic volume (ESV)?
Increasing afterload decreases stroke volume (SV) due to higher resistance against which the heart must pump; Increases end-systolic volume (ESV).
Decreasing afterload increases SV as the heart can eject more blood, resulting in a decreased ESV.
How does sympathetic nervous system stimulation influence cardiovascular performance?
Sympathetic nervous system stimulation increases heart rate and contractility, leading to increased cardiac output and improved blood flow to vital organs. It also causes vasoconstriction, which increases blood pressure.
How do hemodynamic parameters respond to exercise regarding heart rate, end-diastolic volume, end-systolic volume, preload, afterload, and contractility?
Increases: heart rate, afterload, contractility
Decreases: end-systolic volume
Unchanged: end-diastolic volume (or slight decrease), preload.
What is systolic dysfunction (HFrEF)
Systolic dysfunction, or heart failure with reduced ejection fraction (HFrEF), is a condition where the heart's ability to contract and pump blood is impaired, leading to decreased cardiac output and increased end-systolic volume.
what are the four classic characteristics of HFrEF?
dilated chamber
thin LV walls
impaired contractility
reduced cardiac output
How are ventricular volumes and pressures altered in patients with HFrEF?
In patients with HFrEF, ventricular volumes typically increase because of impaired contraction, raising end-diastolic volume. End-systolic volume also rises because the heart fails to eject blood effectively, and ventricular pressures increase as a result.
causes and symptoms of left-sided heart failure
Left-sided heart failure can result from coronary artery disease, hypertension, or cardiomyopathy, characterized by pulmonary congestion symptoms (cough, crackles, pink-tinged sputum, tachypnea), tachycardia, fatigue, cyanosis, and exertional dyspnea.
causes and symptoms of right-sided heart failure
Right-sided heart failure can occur due to left-sided heart failure, right ventricular MI, lung disease (like COPD), or pulmonary hypertension. Characterized by systemic venous congestion symptoms (peripheral edema, ascites, hepatomegaly, splenomegaly, jugular venous distention [JVD], weight gain, and increased peripheral venous pressure).
How are the four functional classes of heart failure categorized according to the New York Heart Association (NYHA)?
Class I: No limitation of physical activity; ordinary physical activity does not cause symptoms.
Class II: Slight limitation of physical activity; comfortable at rest; ordinary physical activity causes symptoms.
Class III: Marked limitation of physical activity; comfortable at rest, but less than ordinary activity causes symptoms.
Class IV: Severe limitation and discomfort with any physical activity; symptoms present even at rest.
Which four medication classes are utilized in the medical management of HFrEF
diuretics
beta blockers
ace inhibitors
arbs
diuretics
Medications that promote the excretion of water and electrolytes from the body, primarily used to reduce fluid overload and lower blood pressure in heart failure patients. Lasix and HCTZ
beta blockers
Medications that reduce heart rate and contractility by blocking beta-adrenergic receptors. They are commonly used to improve heart function and reduce symptoms in heart failure patients. Usually end in -lol
Examples: propranolol, metoprolol, atenolol
ACE Inhibitors
Medications that inhibit the angiotensin-converting enzyme, leading to vasodilation and reduced blood pressure. They help alleviate symptoms and improve outcomes in heart failure patients. End in -pril: examples include lisinopril and enalapril.
ARBs
Medications that block the action of angiotensin II at its receptor sites, resulting in vasodilation and reduced blood pressure. They are used to improve heart function in patients with heart failure and often end in -sartan, such as losartan and valsartan.

In this M-mode tracing, what parameter is indicated by the pink arrow, what is its normal reference value, and what threshold signifies an EF < 30%?
E-point septal separation (EPSS), measures the minimum distance from the peak of the mitral valve anterior leaflet (E-point) to the ventricular septum in early diastole.
The normal range is 2–7 mm, and an EPSS >20mm indicates an EF<30%.
What is fractional shortening (FS), how is it calculated, and what is its normal range?
Fractional shortening is the percentage of change in the LV cavity dimension from diastole to systole. Formula: LVFS=LVIDdLVIDd−LVIDs×100% Normal range: 27–45%.
How does Simpson's biplane method calculate left ventricular volumes?
Simpson's biplane calculates the total volume of the LV cavity by summing the volumes of a series of stacked elliptical discs traced along the endocardial border at end-diastole and end-systole in both the apical 4-chamber (A4C) and apical 2-chamber (A2C) views.
What are the comparative advantages and limitations of linear dimensions (Teichholz), Simpson's biplane, and 3D echocardiography for assessing LV function?
Linear dimensions (Teichholz) are simple and quick but may underestimate volumes in non-elliptical shapes.
Simpson's biplane offers improved accuracy by using two views but is time-consuming and operator-dependent.
3D echocardiography provides the most accurate volume assessments and reduces geometric assumptions, but it is technically challenging and less available.
How is stroke volume (SV) calculated using Doppler echocardiography?
Stroke volume is calculated as: SV=CSA×VTI, where cross-sectional area CSA=πr2 and VTI is the velocity time integral. Stroke volume can be measured across any valve and should be equal across all four valves if they are normal.
dP/dT
is a measurement of the pressure change in the left ventricle over time, often used to assess myocardial contractility. It is calculated as the rate of change of pressure during isovolumetric contraction.
What is the formula for calculating strain
Strain=L0L1−L0×100, where L0 is the baseline length and L1 is the length at a given point in time
what do positive versus negative strain values represent?
Positive strain values indicate elongation or stretch of the myocardial tissue, whereas negative strain values indicate shortening or contraction of the tissue.

On this 17-segment polar bull's-eye map of peak systolic longitudinal strain, what do the colors deep red, lighter red/pink, and blue indicate?
Deep red indicates normal strain; lighter red/pink indicates moderate strain; blue indicates impaired strain.
Which three echocardiographic views are required to calculate Global Longitudinal Strain (GLS), and what are its key clinical applications?
A4C, A2C and A3C
Evaluates LV and RV systolic function, early detection of myocardial dysfunction, and evaluating response to cardiac resynchronization therapy
What are the normal quantitative dimensions for the right ventricle measured in the RV-focused A4C view at end-diastole?
RV basal diameter: <4.1cm
RV mid-cavity diameter: <3.5cm
RV longitudinal length: <8.2cm
RV end-diastolic volume (by 3D): normal is <130mL (severe is >170mL)
How is RV systolic excursion velocity (RV S') measured with tissue Doppler imaging (TDI)
RV S' is measured by placing the sample volume in the tricuspid lateral annulus and recording the peak velocity during systole. This provides an assessment of right ventricular systolic function.

What echocardiographic method is shown in this M-mode recording, how is it performed, and what is its normal cutoff value?
Tricuspid Annular Plane Systolic Excursion (TAPSE). An M-mode cursor is passed through the lateral tricuspid valve annulus parallel to RV longitudinal motion in an RV-focused A4C view, measuring the vertical displacement from end-diastole to end-systole. The normal cutoff is ≥1.7cm.
What is the formula for Right Ventricular Fractional Area Change (RV FAC), how is it traced, and what is the normal value?
Formula: RV FAC %=RV end-diastolic areaRV end-diastolic area−RV end-systolic area×100 Technique: Obtained in an RV-focused A4C view by tracing the endocardial border at end-diastole and end-systole, including trabeculations and the apex within the cavity. Normal value: >35%.
What are the common technical limitations of conventional RV systolic function parameters (RV S', TAPSE, and RV FAC), and what techniques are preferred when available?
All conventional RV parameters are highly angle dependent, measure only regional RV systolic function (primarily longitudinal base-to-apex motion), and are load dependent. 3D RV ejection fraction (RVEF) or RV strain analysis is preferred when available.